Alta 19" Wheels & Tires (2 pair) 1/24

A set of four 19" Alta chrome wheels with low profile tires. Sidewall and tread width is .45" (29/64") Like the wheels but don't want low profile tires?  Take these tires off and replace with other tires. All four wheels/tires are the same size...

General Lee Mini Decal Sheet 1/25

Includes a confederate General Lee flag in two sizes, license plates, names and numbers. The flags measure 2" x 1-7/8" and 1/2" x 3/8" One sheet, 1/25 and 1/16 scales, by SLIXX Decals

Pro Touring 4-Link Housing Kit 1/25

This 4-Link set will give you a lower stance because the 4-link bar is much closer to the axle. The axle brackets mount on the lower front portion of axle tube housing.  This is a complete kit including brackets, link bars and rod ends. Kit...

5-Point Harness Set, Cam-Lock 1/25

Here is a highly detailed set of cam-lock safety harness hardware. This is a photo of the real harness for reference.   Belt material is not included. Etched out of .006" nickel silver, these require patience and dexterity when assembling, but the...

Paint Transfer Pipette

Don't waste paint and make a mess while pouring paint from the bottle to the airbrush cup. Directions: Insert the tip of the eyedropper into the paint or clear coat bottle while squeezing the top pump of the eyedropper. Release the pump but still hold on...

Spider Chrome Wheels & Tires (2 pair) 1/24-1/25

A set of four chrome wheels with low profile tires. Sidewall and tread width is .45" (29/64") Like the wheels but don't want low profile tires?  Take these tires off and replace with other tires. By Pegasus, 1/24 scale.    

Diamante?s Chrome Wheels & Tires (2 pair) 1/24

A set of four "Diamante's" style chrome wheels with low profile tires. Sidewall and tread width is .45" (29/64") Like the wheels but don't want low profile tires?  Take these tires off and replace with other tires. Photo of real Diamante wheel...

Steering Wheel 1/25

Sport Steering Wheel kit. The wheel grip is mastered in 3D and will be sold as either 3D printed or resin, depending on availability. Three-spoke wheel center is photo etched and replicates Grant Performance #673.   Photo of real Grant 673 steering...

Steering Wheel 1/16

Sport Steering Wheel kit. The wheel grip is mastered in 3D and will be sold as either 3D-printed or resin, depending on availability. Three-spoke wheel center is photo etched and replicates Grant Performance #673. The wheel is .82" (13/16") OD. Photo...

Holley Dominator & PE Details, Pair 1/16

Holley Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage Contains 2 carbs and PE details.   Photo shows completed carb and is for illustration only. Assembly required. Resin and photo etched parts by Futurattraction, 1/16...

Holley Split Dominator & PE Details, Pair 1/25

Holley Split Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage Contains 4 split carbs and PE details.   Photos of completed carbs are for illustration only. Assembly required. 3D-printed and photo etched parts by...

B&M Pro Shifter Kit (pair) 1/25

A pair of realistic looking B&M shifters. Check out the assembly instructions here.  I can also include a copy of the instructions in your order - just note it at checkout. Photo etched, 1/25 scale, by Futurattraction  

BBC Offset Motor Plate 1/25

A more accurate motor plate than found in a kit. It is offset for those cars with an off-center driveline.While this motor plate is copied after the one used in the Revell Pro-Sportsman kits, it can be used in any build with possible modification.It is...

Weld SuperLite Wheels 4-Set 1/24

A set of front and rear Weld SuperLite wheelsIncludes wheel fronts and custom open rear rings (for visible brake detail). Fits 1/24th scale Revell-type rear slicks.Resin, 4 wheels - 10 pieces, 1/24 scale, by Futurattraction.    

Cragar 15" SuperTrick Wheels 4-Set, Hub 1/24

A highly detailed set of front and rear Cragar Super Trick wheelsThese Cragar's replicate 15" wheels used on 1970s-80s era drag cars.  Crowned centers are present on both front and rear wheels, with double-drilled pattern on rear wheels. Inner and...

Cragar DragStar Wheels 4-Set 1/24

A set of front and rear Cragar DragStar wheelsIncludes wheel fronts and custom open rear rings (for visible brake detail).Photo above shows a rear wheel in a Futurattraction Good Year slick for reference only - tires are not included.Fits 1/24th scale...

Centerline Wheels 4-Set 1/24

A set of front and rear Centerline wheelsIncludes wheel fronts and custom open rear rings (for visible brake detail). Rear wheel is .73" OD. Overall width with rear ring is .66"Front wheel is .65" OD.  Fits 1/24th scale Revell-type rear slicks...

Liberty Transmission 1/25

This is a replica of the Liberty 5-speed Clutchless transmission. Scott, at Futurattraction, took measurements directly from a real Liberty transmission. It doesn't get any more authentic than this.   See also, a photo etched Liberty shifter...

Carbon Fiber Style Hat, Long 1/24

A round 3-hole hat that is typically seen in carbon fiber. This is a long version.  A shorter version is also available. Molded in one piece. 1/24 scale, by Competition Resins.

Power Steering Pump w/ Pulley 1/25

Here's an item that will detail that engine bay - a power steering pump.  It's modeled after the popular Saginaw pump. Includes an aluminum pulley. Check here for a high pressure hose and here for a rack and pinion set.   One piece resin body...

Optima Battery & Decal 1/25

An accurate representation of the popular Optima battery that is 3D-printed and includes a decal. Battery is two pieces (top and bottom) and you have to paint the battery and then apply the appropriate decal. Top piece includes the terminal posts and...

Good Year Polyglas Tire Set of 4 1/25

A set of four Good Year Polyglas blackwall tires with white lettering on both sides. The tread detail is excellent. Two sizes are included - F60-15 for the front and L60-15 for the rear. These tires were popular during the '60's and '70's and are a...

4-Hole Carbon Fiber Hat 1/25

A 4-Hole compact Injector Hat.  This is slightly raised and has 4 square butterflies. Molded in one piece. Contains 1 resin hat.

HEMI Injector Manifold 1/25

A fuel injector manifold for your HEMI engine.   Here's a fuel plumbing diagram for this manifold.The lines go to a distribution block in the center.      Velocity stacks are available to fit this manifold. File the little 'nubs' on...

Chevy Injector Manifold 1/25

A fuel injector manifold for your Chevy engine.   Here's a fuel plumbing diagrams for this manifold.The lines go to a distribution block in the center.      Velocity stacks are available to fit this manifold. Contains 1 resin piece.

PSI Blower 1/25

A PSI Blower in one-piece resin.For a 'roots' type blower, see the Kalbelco series of 671, 1471 and 1671 super chargers. This is a standalone blower - pulleys or other components are not included. Contains 1 resin blower by Competition Resins, 1/25 scale.

Challenger '08 - '10 Hood 1/25

A 2008-2010 Challenger hood in the 70's Shaker Hood style.   Contains 1 resin hood, 1/25 scale

Liberty Shifter Directions 1/25

Here are detailed instructions for assembling Futurattraction's 1/25 scale Liberty Transmission Shifter. The 1/25 scale Liberty Shifter can be downloaded here.        

Parachute Kit - Complete 1/25

A realistic looking and feeling parachute to slow down that racer.  Now available in a kit. It can be assembled in either the criss-cross or flap configuration and includes a red flag. The bag scales out to a 10"x10" reproduction of  Simpson,...

Wishbone Kit, Lower A-Arm 1/25

These are perfect with Futurattraction's Front Strut kit for the lower A-Arms.These will fit inside 1/16" OD (with an ID of .033") or .042" OD stainless steel tubing (included). Includes:2 - Wishbones2 - Washers - .010" thick4 - Spacers .015" thick1 -...

Rear Tube Frame/Clip .900" Wide 1/25

Here's  a round-tube rear frame clip ready to install.  It's 3D printed. Dimensions are:Frame width = .900" (about 29/32", 22.9mm)Frame tube diameter = .080"Cross member diameter = .080"Overall length = 2.55" Two other frame clip widths are...

Rear Tube Frame/Clip .700" Wide 1/25

Here's  a round-tube rear frame clip ready to install.  It's 3D printed in FUD material (see below). Dimensions are:Frame width = .700" (about 45/64", 17.8mm)Frame tube diameter = .080"Cross member diameter = .063"Overall length = 2.55" Two...

Battery (pair) 1/25

A pair resin batteries to add detail for the trunk or the engine bay. Dress them up with manufacturer's decals found here and battery connectors here.   For multiple battery connections in Parallel or Series, look here.     Contains 2...

Fairmont Drag Racing Body 1/25

A complete Fairmont drag race body kit (minus hood which is purchased separately) with additional options listed below. A Pro Stock version of this Fairmont is also available.  Dyno Don and Bob Glidden decals are also available. Note that...

Carbon Fiber Style Hat, Short 1/24

A round 3-hole hat that is typically seen in carbon fiber. This is a short version.  A longer version is also available. Molded in one piece. 1/24 scale, by Competition Resins.

Cross-Ram Manifold & Carbs 1/25

A cross-ram & carburetor package.All items have locating pins for easy alignment. Consistis of: 1 Cross-Ram manifold 2 4bbl carbs 1 Air cleaner   1/25 scale by Competition Resins