Wheels & Tires

Pro Stock Slicks 1/16

These slicks replicate those labeled as 17x33.5-16.  There are no raised letters on these slicks.  If you want Good Year, Hoosier or M/T names on the tires, check out these 1/16 decals. These slicks are made of a soft rubber.  This...

Dragster Wire Wheels 1/16

Finally, a wire wheel with real spokes that looks realistic. Fully assembled and includes 3D-printed tires painted Tamiya TS-82 "Rubber Black". Featuring small hubs and thin-walled rims for a proportional appearance.   The hub utilizes...

Pro Mod / FC Slicks 1/16

If you're looking for the biggest meat to stick under those wheel tubbs, you just found it.  These are the largest 1/16 slicks on the market. There are no raised letters on these slicks.  If you want Good Year, Hoosier or M/T names on the...

M&H Racemaster Drag Slicks 1/16

M&H Racemaster Drag Slicks. Raised 'M&H Racemaster' on sidewall. These are a hard resin and do not have a lot of room for play with wheel sizes. Tire Measurements: Width 1.00",  25.4mmDiameter. 2.00", 50.8mmWheel opening 1...

Weld V-Series Aluminum Rear Wheels 1/16

A detailed pair of Weld V-Series aluminum rear wheels In 1/16 scale. These match Futurattraction's V-Series front wheels.  These replicate Weld's 16" x 16" wheels. Three different inserts stack to create a 3-dimentional look. The beadlock...

Weld V-Series Front Wheels, 1/16

A pair of  Weld's V-Series 15" x 3.5" spindle-mounted front wheel. Includes three .20" thick 6061-T1 aluminum center inserts that stack for a 3-dimentional look. The outer-most insert is slightly smaller to represent the 'stepped' look. Also...

Weld Magnum Aluminum Rear Wheels 1/16

A detailed pair of Weld Magnum aluminum rear wheels In 1/16 scale. These match Futurattraction's Magnum front wheels.  These replicate Weld's 16" x 16" wheels. Three different inserts stack to create a 3-dimentional look. The beadlock rings...

Weld Magnum Front Wheels, 1/16

A pair of  Weld's Magnum 15" x 3.5" spindle-mounted front wheel. Includes three .20" thick 6061-T1 aluminum center inserts that stack for a 3-dimentional look. The outer-most insert is slightly smaller to represent the 'stepped' look. Also...

Billet Specialties CO7 Aluminum Front Wheels, 1/16

Here is Billet Specialties' Comp7 15" x 3.5" spindle-mounted front wheel. Includes three .20" thick 6061-T1 aluminum center inserts that stack for a 3-dimentional look. Also includes spindle caps. These will fit Futurattraction's 1/16 scale Front...

Billet Specialties CO7 Aluminum Rear Wheels 1/16

A pair of Billet Specialties aluminum rear wheels In 1/16 scale. Here are matching front wheels. These replicate the Comp7 Series 16" x 16" wheels. Three different inserts stack to create a 3-dimentional look with one having a black center. The...

Weld AlumaStar Aluminum 5-Spoke Narrow Front Wheels, 1/16

An excellent reproduction of Weld's AlumaStar 15" x 3.5" spindle-mounted front wheel. Includes three .20" thick 6061-T1 aluminum center inserts that stack for a 3-dimentional look. The outer-most insert is slightly smaller to represent the 'stepped'...

Weld AlumaStar Aluminum Rear Wheels 1/16

A pair of Weld AlumaStar aluminum rear wheels In 1/16 scale. These match Futurattraction's AlumaStar aluminum 5-spoke front wheels.  These replicate Weld's 16" x 16" wheels. Three different inserts stack to create a 3-dimentional look with...

Weld AlumaStar Rear Wheels 1/16

A pair of Weld AlumaStar rear wheels In 1/16 scale to match Futurattraction's AlumaStar 5-spoke front wheels.  These replicate Weld's 16" x 16" wheels. Includes: Deep Outer Rims Inner Wheel Halves Both pieces interlock and a matching line...

Weld AlumaStar 5-Spoke Narrow Front Wheel, 1/16

A 3D-printed reproduction of Weld's AlumaStar 15" x 3.5" front wheel. The five spokes are centered in a .28" width wheel with a 1.04" diameter rim. The raised center of the rim OD will fit Futurattraction's 1/16 scale Front Runner tire.   One...

Coil Over Shock Kit 1/16

Here is a complete, realistic appearing, coil over shock kit, with all of the parts needed to detail your suspension. They are static and once assembled are not movable. These coil-overs replicate 15" Penske 8300 double-adjustable...

Front Strut Gusset Kit 1/16

These gussets are intended to add both structural as well as added detail to the upper strut mount. There are enough for approximately seven cars. These gussets are intended to fit around a 9/64" (.140)" diameter upper strut mount.    ...

Lamb Front Strut Suspension Kit 1/16

Here is a complete 1/16 scale Lamb Front Strut Kit, with all of the parts needed for a detailed front suspension. This is a static suspension and not functional. Kit includes: 2-piece 3D-printed, high detail strut bodies (brackets integral with...

Dragster Wire Wheels with Light Shield 1/16

Real wire wheels with real spokes and one wheel has a 'light shield' on one side for newer dragsters. The light shield provides a larger area for the timing light to trigger at the end of the strip. Fully assembled and includes rubber O-Ring tires...

Front Runner Tires - Soft Rubber 1/16

DUE TO POPULA DEMAND, THESE WENT FAST, BUT THERE ARE MORE COMING ON A FIRST COME FIRST SERVED BASIS Front drag tire patterned after Goodyear Frontrunner tires. These are made with a really soft rubber and the tread pattern is realistic. The tire tread...

Tire Decal Sheet - Yellow Goodyear 1/16

1/16 scale decal sheet for slicks in yellow lettering.  White lettering is also available. Includes 'Goodyear', 'Eagle' and 'Goodyear Eagle' decals.  Enough for several cars.SLIXX Decals.One sheet. 1/16 scale.

Tire Decal Sheet - White Goodyear 1/16

1/16 scale decal sheet for slicks in white lettering.  Yellow lettering is also available. Includes 'Goodyear', 'Eagle' and 'Goodyear Eagle' decals.  Enough for several cars.SLIXX Decals.One sheet. 1/16 scale.

Tire Decal Sheet M&H RaceMaster 1/16

1/16 scale decal sheet for slicks. Enough for 9 pairs of M&H RaceMaster tires.SLIXX Decals.One sheet. 1/16 scale.

Tire Decal Sheet M/T and Hoosier 1/16

1/16 scale decal sheet for slicks.  Contains Hoosier and M/T tire decals. Enough for 6 M/T pairs and 8 Hoosier pairs of tires.SLIXX Decals.One sheet. 1/16 scale.

12-Spoke Front Wheels 1/16

12-Spoke front drag racing wheels. 2 resin pieces, resin, 1/16 scale.

Slotted Rotor 4-Piece Set 1/16

Slotted, 4-rotor set - front and rear. Front rotors equal a scale diameter of 10". Rrear rotors equal a scale 11.75" @ 1/16 scale.   Photo of a real slotted rotor with dual calipers. For a set of drilled rotors check here, or for drilled...

Drilled Rotor 4-Piece Set 1/16

Drilled, 4-rotor set. Front rotors equal a scale diameter of 10". Rrear rotors equal a scale 11.75" @ 1/16 scale. For rear rotors only, click here.   Four pieces, photo etched .015" nickel-silver plate, 1/16 scale.

Drilled Rotor Pair, Large/Rear 1/16

Drilled, large 2-rotor set - These represent a scale diameter of 11.75" @ 1/16 scale. These would be used as rear rotors.  For a set of front and rear rotors, click here.   One pair, photo etched .015" nickel-silver plate, 1/16 scale.

Dragster or Fuel Altered Front Tires 1/16

Skinny front tires for wire or spoked wheels, as found on dragsters and altered. Measurements: 1" OD 0.7" ID These tires fit the Comp Resins 12-spoke wheels found here. Contains 1 pair rubber-like tires.

Cragar Super Trick 8-hole Rear Wheels 1/16

Cragar Super Trick, 8-hole rear drag racing wheels. Fits Revell tires...