Starlight Rear Wheels 1/25

A new custom wheel design by Futurattraction.  These match Futurattraction's front spindle-mount wheels   They are the same 5-point star design and can also use a color-coordinated...

4-Link Pro Mod Suspension Kit (fits Dana also) 1/25

This kit represents the current heavy duty style of 4-link kits found on high horsepower Pro Mod drag cars. Also included in this kit is anti-roll bar linkage and arms. No torsion bar/tube is...

4-Link Set for Rear Tube Frame/Clip 1/25

This 4-Link kit fits narrowed OEM-style 9-inch Ford housings.  Designed to fit RTF (round tube frame) and FRK (mandrel bent frame rail kits) found elsewhere here in three different diameter...

4-Link Suspension Bracket Kit 1/16

This 4-link bracket set includes eight brackets, enough to build one car.  They are patterned after a popular 1:1 bracket.  The hole diameters in the housing brackets are .188", so they can...

4-Link Suspension Kit for Fabricated Rear 1/25

4-Link bracket kit designed to fit Futurattraction's Fabricated 9" kit that represents the contemporary style of 4-link kits found on high horsepower unlimited doorslammer cars. All PE...

4-Link Suspension Kit for Narrowed 9" Braced Rear 1/25

A 4-Link bracket kit designed to fit Futurattraction's Narrowed 9" Braced Rear End kit that represents the contemporary style of 4-link kits found on high horsepower unlimited doorslammer cars...

4-Link Suspension Kit for Narrowed 9" Rear 1/25

A 4-Link bracket kit designed to fit Futurattraction's Narrowed 9" Rear End kit that represents the contemporary style of 4-link kits found on high horsepower unlimited doorslammer cars. All PE...

426 HEMI Front Motor Plate, 1/16

A photo etched front motor plate for a Revell HEMI engine. Includes 4 chassis tabs for bolting on to the motor plate. Sized to fit an approximate chassis width of 1.16" (center to center). Will...

5-Point Harness Set, Cam-Lock 1/25

Here is a highly detailed set of cam-lock safety harness hardware. This is a photo of the real harness for reference.   Belt material is not included. Etched out of .006" nickel silver, these...

American Trak Star Front Wheels 1/24

American Racing TrakStar Front Wheels  This is 5-bolt mounted, not spindle mounted. Brand new and I only have a limited quantity to start with. These American Racing front wheels match the...

American Trak Star Front Wheels 1/25

American Racing TrakStar Front Wheels  This is 5-bolt mounted, not spindle mounted. Brand new and I only have a limited quantity to start with. These American Racing front wheels match the...

American Trak Star Rear Wheels 1/24

American Racing TrakStar Rear Wheels in 1/24 scale   Brand new and I only have a limited quantity to start with. These American Racing rear wheels match the Trak Star front wheels. Here's...

American Trak Star Rear Wheels, 1/25

American Racing TrakStar Rear Wheels in 1/25 scale   Brand new and I only have a limited quantity to start with. These American Racing rear wheels match the Trak Star front wheels. Here's...

B&M Pro Shifter Kit (pair) 1/25

A pair of realistic looking B&M shifters. Check out the assembly instructions here.  I can also include a copy of the instructions in your order - just note it at checkout. Photo etched,...

BBC Centered Motor Plate 1/25

A more accurate motor plate than found in a kit. It is designed for those cars with a centered driveline.While this motor plate is copied after the one used in the Revell Pro-Sportsman kits, it can...

BBC Offset Motor Plate 1/25

A more accurate motor plate than found in a kit. It is offset for those cars with an off-center driveline.While this motor plate is copied after the one used in the Revell Pro-Sportsman kits, it can...

Beadlock Rings Billet Specialties, 1/24

A set of 4 Narrow, scallopped rings with holes all the way around. The beadlock rings are die cast and silver in color.   Photo of actual beadlock ring in black.   The rings are...

Beadlock Rings, Weld 1/24

A set of 4 Weld Beadlock Rings for your rear wheels. The beadlock rings are die cast and silver in color. The rings are on a protective backing and I didn't want to peel one off, so these...

Big Block Engine Crank Trigger 1/16

Here is a Crank Trigger kit, for the a block engine and especially for the big block Chevy. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered...

Big Block Engine, Crank Trigger 1/25

Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a distributor triggered system. A crank triggered...

Big Block Ford, Crank Trigger 1/25

For that big block Ford engine to keep perfect ignition timing. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more...

Billet Specialties Comp5 Front Wheels 1/25

A pair of Billet Specialties front wheels in 1/25 scale.Includes: Outer Rims Inner and Outer Center Inserts Hubs Instructions A Front Strut spindle kit is available for these...

Billet Specialties Comp5 Rear Wheels 1/25

A pair of Billet Specialties rear wheels.Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions   Wheel dimensions:Width .730"Outside Diameter .730"   Matching...

Billet Specialties Comp7 Front Wheels 1/25

A pair of Billet Specialties COMP7 front wheels.Includes: Outer Rims Inner and Outer Center Inserts Hubs Instructions   Photo of real world Comp7 wheel   Wheel dimensions:Width ...

Billet Specialties Comp7 Rear Wheels 1/25

A pair of Billet Specialties COMP7 rear wheels in 1/25 scale.Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions   Wheel dimensions:Width .730"Outside Diameter ...

Black Resin Strange Ultra Rear End & Brake Kit 1/25

This is a new version of Futurattraction's excellent Strange rear end.  The rear and axle tubes are cast in black resin and the carrier section is cast is silver resin.  The results makes...

Blower Belt, 1/16

This 1/16th scale ribbed blower belt fits Revell Hemi engines, as well as other engines, but the pulley cogs may be different.  It is cast out of urethane rubber and stretches enough to fit...

Blower Starter Bracket, 1/16

This restraint plate sits under the blower and restraint straps would fasten to the slots and go over the blower to hold it down in the event it would blow up. It is universal to all blowers...

Blower Starter Bracket, 1/25

Unless your blown engine has its own starter, you'll need to start it with a blower starter. This bracket holds the blower starter and will add that special touch of detail to your engine. Here is...

Brake Kit , Drilled- Front 1/25

A really nice brake set for the front wheels. This drilled rotor set is designed to work with a .093" (3/32) spindle diameter and allows the use of separate calipers and PE brackets. 3D calipers (2...

Brake Kit - Rear .126" Rotor ID 1/25

This is the same rear end brake set as Futurattraction's FA-C-ROT-DR2R-063, except this rotor has a larger .125" ID hole. This allows for the hubs and rotors to slide over Futurattraction's axle...

Brake Kit, Drilled - Rear 1/25

A detailed complete rear end brake set. This drilled rotor set is designed to work with .063" axle diameter and allows the use of separate calipers and PE brackets, for more realism. Kit includes: ...

Cam Lock Safety Harness Set 1/16

Here is a set of highly detailed cam-lock safety harness hardware. Belt material is not included. Assembly required.   Photo etched pieces are made from .015" nickel-silver plate, 1/16...

Carbon Fiber Seat 1/25

A simple one-piece seat for a dragster, FC, P/M, etc. The seat has reliefs in each side to allow for seat belts or safety harness material. My seatbelt/harness material will fit the seat reliefs...

Centerline Wheels 4-Set 1/24

A set of front and rear Centerline wheelsIncludes wheel fronts and custom open rear rings (for visible brake detail). Fits 1/24th scale Revell-type rear slicks. (10 pcs) Resin, 4 wheels - 8...

Central Frame Rail 1/24-1/25

  Want to build your own chassis to fit in that drag racing body? This central frame rail is a vital component containing the cockpit area.This is a one-piece item and doesn't need any assembly...