Blue Aluminum Line .020"

This solid aluminum line is soft to bend and will not kink, even at tight angles. It straightens out easily and will conform to any shape you want. It's also three feet long, so you have plenty to worik with.This aluminum 'hard' line equals the...

Chassis Tab & Bracket Set 1/16

These brackets and tabs can be used in a variety of build environments and will fit .102" frame rails. Use where you need a bit of detail or an attachment point for a handle, gusset, tank, accessory, etc.   Photo etched, 1/16 scale, by...

Gray Cable .010", .25mm Dia

This looks like a stainless steel line, but it's a small gauge stainless steel wire wrapped in a gray nylon jacket. This is ideal for a throttle or parachute release cable where a steel cable is housed in a jacket. The wire core is springy and doesn't...

Liberty Transmission 1/16

Liberty 5-speed clutchless transmission for Pro Stock or other race class up to 3000 HP. Scott, at Futurattraction, took the measurements right off of a real Liberty tranny.  You can't get more realistic than that.   Here's the transmission...

00-90 Washers

This is a flat washer to fit a 00-90 screw.  Perfect for detailing your suspension or wheels as lug nuts.  The metal finish is realistic looking compared to brass nuts.  And no painting is required.Use in suspension parts like 4-link...

Brake, Nitrous or Fuel Line .010, .25mm Dia

This solid aluminum line is the smallest available.  It's soft to bend and will not kink, even at tight angles. It straightens out easily and will conform to any shape you want.This aluminum 'hard' line equals the following equivalent 1:1 size at...

Wheelie Bar Housing Kit 1/16

Here is a Wheelie bar wheel housing kit designed for today's PM, FC, ADRL, SS, and others. Includes PE wheel housing and PE and resin wheels which must be assembled. Fabrication required. Does not include mounting hardware.   Assembly and...

Ladder Bar Rear Brackets 'Type 2' 1/16

This is Type 1 of two different shaped brackets.  Look here for Type 2. Ladder Bar rear end housing Brackets for coil over shocks. There are enough parts included for 4 cars. Includes rear end brackets and shock brackets. For the front brackets,...

Chassis Suspension Brackets 'Type 1' 1/16

This is configuration Type 1 of two different shaped chassis brackets.  Look here for the Type 2. There are enough various brackets included for a few cars. Includes 4 different suspension brackets which mount to the chassis.  Use these for...

Chassis Suspension Brackets 'Type 2' 1/16

This is Type 2 of two different chassis bracket shapes.  Look here for Type 1. There are enough various brackets included for a few cars. Includes 4 different suspension brackets which mount to the chassis.  Use these for 4-link, ladder bar or...

Pro Mod / FC Slicks 1/16

If you're looking for the biggest meat to stick under those wheel tubbs, you just found it.  These are the largest 1/16 slicks on the market. There are no raised letters on these slicks.  If you want Good Year, Hoosier or M/T names on the...

Front Runner Tires - Soft Rubber 1/16

DUE TO POPULA DEMAND, THESE WENT FAST, BUT THERE ARE MORE COMING ON A FIRST COME FIRST SERVED BASIS Front drag tire patterned after Goodyear Frontrunner tires. These are made with a really soft rubber and the tread pattern is realistic. The tire tread...

Front Suspension & Engine Mount Kit, Brass 1/25

There are enough parts included for two cars. Includes two front motor mount plates - one solid and one drilled.                             One sheet Etched in...

Liberty Transmission & Shifter Set 1/16

Liberty 5-speed clutchless transmission and photo etched lever set for Pro Stock or other race class up to 3000 HP. Scott, at Futurattraction, took the measurements right off of a real Liberty tranny.  You can't get more realistic than that...

4-Link Suspension Bracket Kit 1/16

This 4-link bracket set includes eight brackets, enough to build one car.  They are patterned after a popular 1:1 bracket.  The hole diameters in the housing brackets are .188", so they can be drilled out to the diameter of your axle housing...

Slotted Rotor 4-Piece Set 1/16

Slotted, 4-rotor set - front and rear. Front rotors equal a scale diameter of 10". Rrear rotors equal a scale 11.75" @ 1/16 scale.   Photo of a real slotted rotor with dual calipers. For a set of drilled rotors check here, or for drilled...

00-90 Hex Nuts

This is a true Hex Nut in a 00-90 size and thread configuration.  Perfect for detailing your suspension or wheels as lug nuts.  The metal finish is realistic looking compared to brass nuts.  And no painting is required.Use in...

00-90 x 3/16", 5mm Slot Head Machine Screw

Here's a pan head machine screw in a 00-90 size and thread configuration. Perfect for detailing your suspension or wheels lug bolts.  The metal finish is realistic looking compared to brass nuts.  No need to paint anything.Use in...

Drilled Rotor Pair, Large/Rear 1/16

Drilled, large 2-rotor set - These represent a scale diameter of 11.75" @ 1/16 scale. These would be used as rear rotors.  For a set of front and rear rotors, click here.   One pair, photo etched .015" nickel-silver plate, 1/16 scale.

Lenco Shifter Lever Set 1/16

You need a set of these Lenco shifters for your Pro Mod or other drag car.  Adds realism and detail to your build. Contains set of levers and will work with the TDR or Flash Point Lenco transmissions. Make sure you click on the photo, to enlarge it,...

Hand Brake Levers for for PM or TF 1/16

A set of Hand Brake Levers for your Dragster or Funny Car.  Adds realism and detail to your build. Contains two brake levers with additional hand grips. Place a small piece of styrene between the lever grip and added grip for thickness. Photo...

Bellhousing-Racing 7-1/2" Deep (No Starter) 1/16

This bellhousing fits both of TDR's BBC and SBC engines as well as other engines that don't have a starter at the flywheel.  Depending which engine you're mounting this on, you may have to make a thin plate to fit between the engine block and...

Small Detailing Wire

Small gauge detailing wire for ignition items, lights, gauges and other smaller electrical loads. Available in Black, Blue and Yellow. One package contains 3' x .007" diameter wire. Specify color.

Brake or Fuel Line .016", .4mm Dia

  This hard line equals the following equivalent 1:1 size at each scale. 1/25 scale = 3/8"1/16 scale = 1/4"1/12 scale = 3/16"1/8 scale  =  1/8" Depending on your scale, typical uses are injector lines from distribution blocks into a...

Fuel or Brake Hard Line .020, .52mm Dia

This solid aluminum line is soft to bend and will not kink, even at tight angles. It straightens out easily and will conform to any shape you want.This aluminum 'hard' line equals the following equivalent 1:1 size at each scale.1/25 scale = 1/2"1/16...

Nut & Bolt Set, Photo Etched

Photo Etched bolt and nut flat heads,  Nut features a protruding bolt. Offered in 3 sizes to fit your needs. The dimension is measured across the flats.Mounted on a soft back so no cutting of parts is necessary (means less lost parts)  ...

Dirt Suspension Mount Kit, Brass 1/16

There are enough parts included for two cars. Kit includes:2 Rear 4-Link Mounts5 Rear Shock Mounts3 Upper Front Shock Mounts2 6th Coil Mounts4 Lower front shock Mounts4 Lift Bar linkage Mounts8 Shifter Linkage Mounts The photo below is a work-in-progress...

Strange Ultra Center Section for Ford 9" Rear End 1/16

This is an exact replica of a Strange Ultra carrier for a Ford 9" rear end. This will fit on TDR's Ford 9" rear end or cut off the carrier of your existing rear end and glue this one on.See TDR's 9" Ford rear end here.This can be used to beef up a street...

Tee Fitting, Large

This is a large inline fitting for braided lines, hard lines or hoses.  Anywhere you have a split.Typical uses are dual feed carburetors, tunnel ram, oil lines and brake lines.Use Pro Tech .035 Braided Line and matching Fittings. Each package...

Tee Fitting, Small

This is an inline fitting for braided lines, hard lines or hoses.Typical uses are splits for carburetor fuel lines and brake lines.Use Pro Tech .025 Braided Line and matching Fittings. Each package contains one T fitting, by Pro Tech. Metal Cast

Rod Ends/Link/Heim Kit 1/16

Cast metal parts for your suspension or throttle linkage detail.  Can be used for heim joints/rod ends in suspension areas like a 4-link rear end, panard bar or front radius rods. Use in combination with Pro Tech's Throttle Linkage kit for a...

Large Detailing Wire

Large gauge detailing wire for ignition items, batteries and other items that have large electrical loads. Available in Black, Red, Blue and Yellow. One package contains 3' x .018" diameter wire. Specify color.