Competition Resins

'34 Ford Chopped Top Body, 1/25

This is a '33-'34 Ford 5-window coupe. For drag racing it could be a gasser, altered or competition coupe. It would also serve as a street rod, hot rod or rat rod. It has a chopped top and chopped...

12-Spoke Front Wheels 1/16

12-Spoke front drag racing wheels. 2 resin pieces, resin, 1/16 scale.

12-Spoke Front Wheels 1/25

12-Spoke front drag racing wheels. 4 resin pieces makes 2 wheels, 1/25 scale, by Competition Resins.

1471 Kobelco Blower 1/25

A 1471 Kobelco Blower in one-piece resin.The detail is quite good and the bolts are sharp. This is a standalone blower - pulleys or other components are not included. Check out this photo for an idea...

1471 Kobelco Blower with Blanket 1/25

A Kobelco 1471 Blower with a restraint blanket molded in.Made in one piece.This a blower only - pulleys or other components are not included. Check out this photo for an idea of which blower you need...

1965 Mustang Tear Drop Hood - AMT 1/25

A tear drop bubble that can be cut out and mounted on your hood or it's made to fit the AMT stock '65 Mustang kit.   Here's an example of the hood on a 'Russ Davis Ford' Mustang...

23 Pickup T Fuel Altered Body 1/25

 Includes: T Pickup Body Radiator Shell Front Wing              Photo of real T altered I have a one-piece 3D-printed Resin Chassis for...

3-Hole Carbon Fiber Hat 1/25

A 3-Hole compact Injector Hat.Molded in one piece. Contains 1 resin hat.

4-Hole Carbon Fiber Hat 1/25

A 4-Hole compact Injector Hat.  This is slightly raised and has 4 square butterflies. Molded in one piece. Contains 1 resin hat.

41 Willys Pro Mod Body '05 1/24

The popular '41 Willys Pro Mod Resin Body. Features molded-in rear wing. The finish on the body is really smooth and crisp. Use Revell Pro Street Corvette Kit For Chassis.   One resin...

5-Slot Rear Wheels 1/16

A 2-piece, 5-slot rear racing wheel. Fits Revell tires. Contains 4 resin pieces/2 wheels.

53 Corvette Pro Mod Body '05 1/24

A really nice 1953 Pro Mod Resin Body. Features molded-in rear wing. The finish on the body is really smooth and crisp.   One resin body 1/25 scale, by Competition Resins  

60s 5-Spoke Rear Drag Wheels 1/25

A pair of 5-spoke deep rear wheels. Popular on gassers, super stock or pro stock cars as well as mean street machines.   One pair of resin wheels by Competition Resins, 1/25 scale.

671 GMC Blower 1/16

A 671 blower for early dragsters or for a street machine.Blower pulley is attached to the front plate.The detail is quite good and the bolts are sharp. Check out this photo for an idea of which...

68 Dana Camaro Hood 1/25

A split double intake hood to replicate the 1968 Dana Camaro. Here's an example of the hood on a Dana Camaro.           Contains 1 resin hood, 1/25 scale

70's Pro Stock Front Tires - Firestone Drag 500 / Goodyear, 1/25

These front tires will work for a Gasser as well as a Pro Mod or street racer.   Has Firestone Drag 500 & Goodyear MarkingsCast from Medium Soft Rubber These are semi hard tires but still...

70's Ribbed Injector Hat 1/16

1970's style 3-port ribbed-top injector hat.   See also, photo eteched butterfly set to fit this injector.   Resin, 1/16 scale.

72 Pinto P/S (Glidden-Allen) Body 1/25

Here's a different Pro Stock body idea. Build it as your own racer or duplicate Bob Glidden & Bob Allen's '72 P/S Pinto. This body also works for Dyno Don Nicholson's Pinto racer...

77 Pinto Pro Stock Body 1/25

1977 Ford Pinto Pro Stock Resin Body Build it as your own racer or duplicate Bob Glidden & Bob Allen's '72 P/S Pinto. Features Hood Hood Scoop Dash Clear Headlights Rear Bumper Red...

Aero II Pro Stock Hood Scoop, 1/25

A Rectangular Opening Pro Stock Hood Scoop. It's designed to rest against the windshield and may have to be adjusted to fit your windshield angle. See also a longer version of this hood scoop...

Altered or Small Wing 1/25

A small wing for any use, but a fuel altered is an example. Has teardrop end plates. Measurements: Length: 1" Width: .62" Contains 1 resin piece, 1/25 scale

Arden Heads with Valve Covers 1/25

For that Flathead engine - a pair of Arden heads with valve covers. The spark plug holes can be easily drilled. You can't tell by the photo, but ARDEN is spelled across the face. Contains 2 resin...

Bantam Body (Pure Hell) 1/25

This Bantam body is designed after the Pure Hell fuel altered roadster. Pure Hell was an 82" wheelbase Fuel Altered that started with a SBC engine and later moved to a 392 HEMI. It has the sculped...

Battery 1/25

A battery to start that mean engine! Dress it up with manufacturer's decals found here. Contains 1 resin battery, 1/25 scale, by Competition Resin

Battery (pair) 1/25

A pair resin batteries to add detail for the trunk or the engine bay. Dress them up with manufacturer's decals found here and battery connectors here.   For multiple battery connections in...

BBC M/T Valve Covers 1/25

A pair of BBC or HEMI valve covers with a filler cap on the end of each one. Contains 2 resin pieces.

BBC Milodon Valve Covers 1/25

Tall Milodon valve covers with MILODON spelled out. These valve covers have horizontal grooves running lengthwise. Contains 2 resin pieces.

BBC Tall Valve Covers 1/25

A pair of BBC flat top valve covers that are taller than normal. These will help make your engine look bigger, too. Contains 2 resin pieces.

Bear Claw' Rear Wheels 1/25

A pair of deep rear wheels. Similar to an ET III style wheel.    Contains 2 resin wheels 1/25 scale.

Blower 14-71, 1/16

A nice 14-71 blower with an end plate and front plate including a cogged pulley   Resin, 1/16 scale, by Competition Resins.

Blower Pulleys 1/16

Crank, Blower and Idler pulleys for that blown engine.   3 pieces, resin, 1/16 scale.

Camaro '67 -'68 F/ C, P/M, P/S Body 1/25

Competition Resins calls this a funny car, but I think it works for pro mod and pro stock also.  I don't see anythig that would restrict it to just a F/C. Check out this Pro Stock decal...

Camaro 2012-13 Pro Mod / Pro Stock Body 1/25

  2012-13 Camaro Pro Stock - Pro Mod Resin Body Kit includes: Hood Scoop Hood Scoop Blank 2 Grill Inserts Rear Wing Translucent Red Tail Lights See SLIXX decals for...

Carbon Fiber Style Hat, Long 1/24

A round 3-hole hat that is typically seen in carbon fiber. This is a long version.  A shorter version is also available. Molded in one piece. 1/24 scale, by Competition Resins.

Carbon Fiber Style Hat, Short 1/24

A round 3-hole hat that is typically seen in carbon fiber. This is a short version.  A longer version is also available. Molded in one piece. 1/24 scale, by Competition Resins.

Centerline Drag Star Wheels, Resin 1/25

A set of four Centerline Drag Star Racing Wheels - front and rear. Wheel details are sharp and crisp. Rear wheel is .70" OD.  Overall width is .35".Front wheel is .66" OD. Consists of 4 total...