M&H Racemaster 'Pie Crust' Slicks 1/25

M&H Racemaster 'Pie Crust' Drag Slicks, black wall. Raised 'M&H Racemaster' lettering on one sidewall. Letters are slightly raised.Fairly soft rubber cast tires. Tire Measurements: Diameter = 1.18"Overall Width = .46"Tread Width = .37Wheel...

Camaro '67 -'68 F/ C, P/M, P/S Body 1/25

Competition Resins calls this a funny car, but I think it works for pro mod and pro stock also.  I don't see anythig that would restrict it to just a F/C. Check out this Pro Stock decal sheet and this Nostalgia Funny Car sheet for decals that...

'68 Dana Camaro Hood 1/25

A split double intake hood to replicate the 1968 Dana Camaro. Here's an example of the hood on a Dana Camaro.           Contains 1 resin hood, 1/25 scale

Front Engine Fiat Dragster Body 1/25

A front engine Fiat drag racing body from the early '60's to today. Features: One-piece body Use AMT Front Engine Dragster kit for Chassis Body Color - White   One resin body with included items as outlined, 1/25 scale, by Competition...

70's Pro Stock Front Tires - Firestone Drag 500 / Goodyear, 1/25

These front tires will work for a Gasser as well as a Pro Mod or street racer.   Has Firestone Drag 500 & Goodyear MarkingsCast from Medium Soft Rubber These are semi hard tires but still flexible. Measurements:Outside Diameter = .1...

Long Aero III Pro Stock Hood Scoop, 1/25

A long, rectangular-opening Pro Stock Hood Scoop. It's designed to rest against the windshield and may have to be adjusted to fit your windshield angle. This is a longer version of the Aero II P/S hood scoop. Length 2.00 inWidth .735 in. Molded in...

Aero II Pro Stock Hood Scoop, 1/25

A Rectangular Opening Pro Stock Hood Scoop. It's designed to rest against the windshield and may have to be adjusted to fit your windshield angle. See also a longer version of this hood scoop here. Molded in one piece. Contains 1 resin scoop,...

Pro Mod Rectangle Rear Wing, 1/25

A one piece tapered wing for Pro Mod or other builds. Wing has Tapered Side Spill Plates on Bottom Width 2.350 Height .620 Length .780 This is a typical wing for Pro Mod, but it can be made to fit many different cars and race classes. Resin,...

Pontiac GXP Pro Stock Body, 1/24

Make  your own P/S racer or a replica of Rodger Brogdon's 'Pistonator' GXP P/S. . Kit includes: D-Shaped P/S Hood Scoop Rear Wing Clear Front Headlights Translucent red tail lights Headlights Use Revell's Larry Morgan's Super...

72 Pinto Pro Stock Body 1/25

Here's a different Pro Stock body idea. Build it as your own racer or duplicate Bob Glidden & Bob  Allen's '72 P/S Pinto. Features 2 sets of Bumpers ( Fat style & Tube Style ) , Hood & Scoop Grill Deck Lid Spoiler Dash Clear...

Fiat Fuel Altered Body 1/25

  An iconic drag racing body from the early '60's to today. Newer versions use a longer wheelbase for more stability. Features: One-piece body Use a Modified Early Model Revell Funny Car Kit for Chassis Body Color -...

Cragar 70's P/S 4-Wheel Set 1/25

A set of four Cragar Pro Stock Racing Wheels. The deep rear wheels could be used on a street rod, rat rod or other street machine. These Cragar's were popular in the 70's in Pro Stock class.   Contains 2 pairs of resin wheels, 1/25 scale...

GM Powerglide Transmission 1/25

A nicely detailed General Motors 350 Powerglide transmission. Molded in one piece with bellhousing. By Competition Resins, 1/25 scale

Tall 4-Hole TF-PM Hat #1 1/25

A four square-hole, tall Injector Hat similar to what you find on TF and PM cars Molded in one piece. Contains 1 resin hat.

Ford 9" Rear End 1/25

A stock Ford 9" rear end for that street rod, hot rod or rat rod.     Contains 1 resin piece, 1/25 scale

60s 5-Spoke Rear Drag Wheels 1/25

A pair of 5-spoke deep rear wheels. Popular on gassers, super stock or pro stock cars as well as mean street machines.   One pair of resin wheels by Competition Resins, 1/25 scale.

Weld Pro Star 4-Wheel Set 1/25

A set of four Weld Pro Star Racing Wheels - front and rear. Photo shows centers as one solid piece but the '5-spokes' cut out. Includes deep rear wheels and front wheels showing lug nuts.   Contains 2 pairs resin wheels, 1/25 scale.

Gasser Slotted Front Wheels 1/25

A pair of 5-slot front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Fenton Front Wheels, but these have slightly smaller slots    One pair of resin wheels by Competition Resins, 1/25 scale.

Molded Blower Belt with Pulleys 1/25

A more detailed blower belt set than found in kits. The belt shows cogs on the inside and bolt heads are found on the pulleys. Also has the blower pulley, crank pulley and idler pulley molded in..   Blower pulley to Crank pulley center-to-center...

BBC Milodon Valve Covers 1/25

Tall Milodon valve covers with MILODON spelled out. These valve covers have horizontal grooves running lengthwise. Contains 2 resin pieces.

BBC M/T Valve Covers 1/25

A pair of BBC or HEMI valve covers with a filler cap on the end of each one. Contains 2 resin pieces.

Large Tapered Pro Stock Wing 1/25

This wing is fairly large and is straighter along the rear edge than along the front edge. End plates are tapered toward the rear and extend down from the top edge. Measurements: Overall length: 2.15" (at the widest, front, edge) Width at end plates:...

Pro Stock/Pro Mod Wing 1/25

This wing has a small arch as viewed from the toop. Has teardrop end plates. Measurements: Overall length: 2.15" Width at end plates: .52" Contains 1 resin piece, 1/25 scale

Altered or Small Wing 1/25

A small wing for any use, but a fuel altered is an example. Has teardrop end plates. Measurements: Length: 1" Width: .62" Contains 1 resin piece, 1/25 scale

BBC Tall Valve Covers 1/25

A pair of BBC flat top valve covers that are taller than normal. These will help make your engine look bigger, too. Contains 2 resin pieces.

Top Fuel Wheel Set 1/25

A set of four Racing Wheels for a TF dragster - front and rear. Features a thin front wheel with a deep rim in order to make sure the timing lights are tripped at the end of the quarter mile. The 2-piece front wheel will accept the 'bicycle tire' found...

Bear Claw' Rear Wheels 1/25

A pair of deep rear wheels. Similar to an ET III style wheel.    Contains 2 resin wheels 1/25 scale.

Fenton/Anson Front Wheels 1/25

A pair of 5-slot Fenton (or Anson) front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Gasser Front Wheels, but these have larger slots  OD = .67", 17mm Overall Width = .19", 5mm   The wheels...

Wide Rear Steel Wheel Pair 1/25

A pair of deep rear wheels. These are stock looking steel wheels with lug nuts, except they're wide to hold big rubber. Great for street racers, early Super Stock or Pro Stock and Rat Rods. Width/Depth = .33" (11/32")   Contains 2 resin wheels...

MiniLite Road Racing Wheel Set 1/25

A set of four road MiniiLite Racing Wheels. Unlike the racing set of MiniLite wheels, these are all the same size.   Contains 4 resin wheels by Competition Resins, 1/25 scale.

Einstein Blower Hat and Base 1/25

Here's a different blower hat.  It's similar to the Janis style. Includes a plate with an injector distribution block. Overall height is 1.00". Three pieces in resin   By Competition Resins, 1/25 scale.    

Dual Quad Tunnel Ram Manifold 1/25

Set a pair of Dominator or Demon carbs on top of this manifold. Make sure you have room under your hood or cut a hole in the hood to allow for the height. Overall height is .43" (7/16"). Here's a photo of a real dual quad setup byRich Vitiritti...

S.C.O.T Blower 1/25

Here's a special blower for that Flathead engine. S.Co.T. is an abbreviation for 'Supercharger Company of Turin' (Torino), Italy. It was one of the most popular "roots" style blowers in the 1950's and popular today on Street Rods and Rat Rods...

Holley Dominator Carburetor (Pair) 1/25

A pair of nicely detailed Holly Dominator 4-bbl Carburetors. With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING). Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the SMALL or LARGE 'T' fitting...

Pirelli Type Small Front Racing Tires 1/25

These front tires will work for a Gasser as well as a Pro Mod or street racer. These are slightly smaller than the Futurattraction Front Runner tires. These are semi hard tires but still flexible. Measurements:Outside Diameter = .98"Overall width = ...

Good Year Dragster Slicks 1/25

These are labeled '60's Goodyear Dragster Slicks but depending on the size you want, these will work for any racer. "Good Year" is in raised letters on both sides. These are slightly smaller than the Comp Resins' Pro Stock slicks. These are fairly...