Hardware-Tools-Paint-Weathering all scales

Micro Weld

NOTE - CANNOT SHIP INTNATIONAL OR BY AIR TO DOMESTIC LOCATIONS Microscale's Micro-Weld is a styrene solvent cement that will provide the strongest bond for pieces that you want to stay together. Building that chassis with styrene rod? You need...

Drill Bit Index #61 - #80

 20-piece HSS drill bit index. This can be laid flat or it has a means for hanging.   One drill set, by Zona.  

Black Ferrule Fittings for Braided, Soft, Hard Lines

The latest trend in TF or FC is black fuel lines with black anodized fittings. You see them for blower injector lines, Injector-hat injection lines and more. These lines are black braided lines with black anodized AN fittings.  Typically these...

Preval Spray Gun

Always wanted to use Alclad or Gravity Colors' paints but didn't want to buy an airbrush? Here's an easy way to spray paint your model with any available paint or clear coat.  It can be an automotive or other paint that you wouldn't normally be...

Micro Sol, Setting Solution

Microscale's Micro-Sol is a decal "setting" solution for the most difficult irregular surfaces to be found on models. It allows the decal to drape down onto the surface of the model, conforming perfectly to surface irregularities without distortion...

Micro Set, Setting Solution

Microscale's Micro-Set is a decal "setting" solution that softens decals and improves adhesion plus lets the decal conform to the model's surface. To apply Micro Set: Use a soft flat artist's brush and apply Micro Set where you are going to apply the...

Hard Line Straightener Tool

This invaluably simple tool will straighten out almost every size of aluminum hard line I have. The range is from .014" hard line to .127" hard line. Here is a table on my Tech Page to determine the size of the hard line (or soft line) you need...

Ferrule Fittings for Braided, Soft, Hard LInes -Silver

Perfect for simulating compression or crimp-type end-of-line fittings on NOS lines, blower injector lines, Injector-hat injection lines or carb fittings. Can also be used as radiator hose ends and carburetor 'boosters'.         ...

Ferrule Fittings for Braided, Soft, Hard LInes -Brass

Perfect for simulating crimp-type end-of-line fittings on Blower injector lines, Injector Hat injector lines or carb fittings. Can also be used as carburetor 'boosters'.  The photo above shows injector lines using Size A ferrules and .020"...

Nut & Bolt Set - Photo Etched

Photo Etched bolt and nut flat heads,  Nut features a protruding bolt. Offered in 3 sizes to fit your needs. The dimension is measured across the flats.Mounted on a soft back so no cutting of parts is necessary (means less lost...

Flat Nose Pliers for Bending PE Items

A tool every modeler needs, especially working with photo etched parts. The .23" wide flat nose is perfect for bending at a sharp angle. Look at this FREE information sheet from Futurattraction on how to properly bend PE parts. FEATURES: Flat nose...

Grabit-Stix Tool

Scale Motorsport is known for their quality products. They call this "a small parts placement tool with a thousand uses" The sticky end of the Stix will hold almost anything you would want to place or paint for a scale model. One package contains 15...