Windshield Wipers, 4 Pairs 1/25

This windshield wiper set is typical for cars from the '40's to today. The older cars have them exposed and left as stainless steel, while the newer cars have the wiper blades hidden below the hood and are normally black. Includes 4 sets of blades with...

Large Tool Box, 1/25

A large tool box to hold the small tool box by Highlight Model Studio.  As is, it has a stainless steel or shiny aluminum appearance. Actually can be made to open or build it in an open or closed position. Has a diamond pattern for the top and...

Tool Set, 1/25

This photo etched sheet contains detailed tools you need for a fantastic show display (with the trunk open) or a diorama. Contains: 14 - Open-end wrenches, various sizes 1   - Open-end wrench carrier 1   - Hacksaw 1 ...

MOONEYES Foot Pedal Set, 1/25

This is what you need for the early gasser or digger and also perfect for rat rods and hot rods. Set  includes a total of 17 pedals. See the photo above for the different sizes and styles. Photo etched and assembly is required.   Photo...

Steering Wheel 5-Set #2, 1/25

A set of 5 different steering wheels for that hot rod, rat rod or other project. Contains 5  3-Spoke steering wheels 5  Horn buttons Bend each spoke out from the hub to make the steering wheel as deep as needed. Requires an o-ring for...

Steering Wheel 5-Set #1, 1/25

A set of 5 different steering wheels for that hot rod, rat rod or other project. Contains 3  3-Spoke steering wheels 2  4-Spoke steering wheels 6  Horn buttons Bend each spoke out from the hub to make the steering wheel as deep as...

Ford 9" Rear End 1/25

A stock Ford 9" rear end for that street rod, hot rod or rat rod.     Contains 1 resin piece, 1/25 scale

60s 5-Spoke Rear Drag Wheels 1/25

A pair of 5-spoke deep rear wheels. Popular on gassers, super stock or pro stock cars as well as mean street machines.   One pair of resin wheels by Competition Resins, 1/25 scale.

Engine Detailing Kit Plus #1, 1/25

An engine wiring and plumbing kit Consists of: Radiator hose, black Heater hose, black Black detailing wire (battery, ignition, etc) Red detailing wire (battery, ignition, etc) Two sizes of aluminum line  By Parts by Parks, 1/25 scale.

Pedals - Drag, Rat Rod, Hot Rod 1/25

A set of pedals, perfect for dragster, gasser, hot rod, rat rod or other project car. Nine sets of pedals are included. Each set has accelerator, brake and clutch pedals. Photo etched and assembly is required.   Photo etched sheet, by Highlight...

Bomber Seats (2) Set #2, 1/25

A pair of bomber seats for that hot rod, rat rod or other project. Directions are not included, but here is a link to a PDF file showing assembly.   Photo etched and assembly is required.   Two seats, by Highlight Model Studio, 1/25 scale.

Gasser Miscellaneous Decal Sheet #3, 1/25

Gasser 1/25 scale mini decal sheet. This sheet doesn't have real world sponsors, but has colorful names and racing flags.   One mini sheet. by SLIXX Decals, 1/25 scale.

S&S Gasser Decal Sheet #3 1/25

Gasser style drag racing contingency decal sheet. Includes sponsors like Hurst (large and small), Valvoline, Drag News, Crower and Isky. Also includes gasser class designations like A/G, B/G and C/G along with numbers. Some of the decals would look...

Belt Material - Serpentine, V-Belt, Accessory 1/25

This rubber, stretchable belt material can be used for many purposes. The 3" long strip is ribbed lengthwise and can be separated for the width you need.  Simply cut the length desired and glue it at the underside of the crank or other pulley...

Dual Style Battery 1/25

A a pair of older style batteries with 2 long filler caps on the top. Shows a strap around the batteries and long filler caps with top posts.  Here is how to wire the batteries together.   1 resin piece, by Pegasus Hobbies, 1/25 scale...

Drag Racing Tire Decal Sheet 1/25

1/25 scale decal sheet for drag racing slicks.  Includes: Goodyear, white Goodyear, large and small, yellow Eagle, large and small, yellow Hoosier, large and small, white Firestone Drag 500 M&H RaceMaster Enough for several cars...

Windshield Clips 1/24-1/25

A photo-etched plate of miscellaneous clips to hold the windshield and side windows. Attach these to a frame that is shaped to the door opening/window shape and the glass attaches to them. They can be painted  or left bare for that aluminum look...

Soft Clear Line Hose .032", .8mm

This is a soft clear tubing that is easily configured to the space you have. It's able to bend at a fairly sharp angle without collapsing.   For fittings, see Hex Fittings or Size I Ferrules sized at .080 for this clear line. This soft line...

Soft Clear Line Hose .028", .7mm

This is a soft clear line and easily configured to the space you have. It's able to bend at a fairly sharp angle without collapsing. It will drape like an actual line.  Depending on your scale, it's excellent for carb fuel lines, radiator overflow...

Chain Link License Plate Frames 1/25

A set of 8 license plate frames with chain links surrounding the plate area. In the center of the license plate area are 3 keys.  They're really small and easy to lose. Enough for at several cars. Photo etched in nickel silver.   By Model Car...

Custom Billet Wings - 'Valdez GT', 1/25

Part of the Model Car Garage 'Tuner Series' is this set of 'Valdez GT' wings. A photo etched plate consisting of: 2 horizontal wings 2 wing ends Supports. Instructions The included instructions show the same wing drawing for 3 different wings in this...

Custom Billet Wings - Slick Shooter, 1/25

Part of the Model Car Garage 'Tuner Series' is this set of 'Slick Shooter' wings. A photo etched plate consisting of: 2 horizontal wings 2 wing ends Supports. Instructions The included instructions show the same wing drawing for 3 different wings in...

Custom Billet Wings - Wingbat GT, 1/25

Part of the Model Car Garage 'Tuner Series' is this set of 'Wingbat GT' wings. A photo etched plate consisting of: 2 horizontal wings 2 wing ends Supports. Instructions Length of both wings is 2-1/8" Support height is .45" The instructions state that...

Megaphone Exhaust Tips ,1/25

A pair of aluminum exhaust tips with an angled flared end. This is hollow and looks realistic. Dimensions: Inlet Diameter: 1/8" Outlet Diameter: 3/16" (flared end) For 2-1/2" exhaust pipes to match, use .112 aluminum hard line. This is almost the same OD...

Salt Lake Style Moon Wheel Covers 15" 1/25

A set of four spun aluminum large Moon hubcaps. These are found on early custom cars and often found on Salt Lake racers. This is made of solid aluminum and has a flat back. Measures 5/8" diameter or a scale 15". Four aluminum pieces by Parts by Parks,...

Salt Lake Style Moon Wheel Covers 16" 1/25

A set of four spun aluminum large Moon hubcaps. These are found on early custom cars and often found on Salt Lake racers. This is made of solid aluminum and has a flat back. Measures 11/16" diameter or a scale 16". Four aluminum pieces by Parts by Parks,...

Pulley Set #6 Polished 1/25

A set of four polished aluminum V-groove pulleys with belt material. The face of the this pulley set is smooth and slightly cone shaped where the center is pointed outward, except for the crank pulley. Consists of four single groove pulleys: Crank...

Weld Pro Star 4-Wheel Set 1/25

A set of four Weld Pro Star Racing Wheels - front and rear. Photo shows centers as one solid piece but the '5-spokes' cut out. Includes deep rear wheels and front wheels showing lug nuts.   Contains 2 pairs resin wheels, 1/25 scale.

Gasser Slotted Front Wheels 1/25

A pair of 5-slot front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Fenton Front Wheels, but these have slightly smaller slots    One pair of resin wheels by Competition Resins, 1/25 scale.

Molded Blower Belt with Pulleys 1/25

A more detailed blower belt set than found in kits. The belt shows cogs on the inside and bolt heads are found on the pulleys. Also has the blower pulley, crank pulley and idler pulley molded in..   Blower pulley to Crank pulley center-to-center...

BBC Milodon Valve Covers 1/25

Tall Milodon valve covers with MILODON spelled out. These valve covers have horizontal grooves running lengthwise. Contains 2 resin pieces.

BBC M/T Valve Covers 1/25

A pair of BBC or HEMI valve covers with a filler cap on the end of each one. Contains 2 resin pieces.

Large Tapered Pro Stock Wing 1/25

This wing is fairly large and is straighter along the rear edge than along the front edge. End plates are tapered toward the rear and extend down from the top edge. Measurements: Overall length: 2.15" (at the widest, front, edge) Width at end plates: 1...

Pro Stock/Pro Mod Wing 1/25

This wing has a small arch as viewed from the toop. Has teardrop end plates. Measurements: Overall length: 2.15" Width at end plates: .52" Contains 1 resin piece, 1/25 scale

Altered or Small Wing 1/25

A small wing for any use, but a fuel altered is an example. Has teardrop end plates. Measurements: Length: 1" Width: .62" Contains 1 resin piece, 1/25 scale

BBC Tall Valve Covers 1/25

A pair of BBC flat top valve covers that are taller than normal. These will help make your engine look bigger, too. Contains 2 resin pieces.