Valve Covers and Radiator Decal Sheet 1/25

Here is a small sheet of decals for labels on your valve covers and radiator. Manufacturers include Reher-Morrison, Sonny's, BAE, Jon Kraase, Lingenfelter, Shafiroff, Steve Schmit, Chevrolet and Pontiac plus the major radiator manufacturers. There are...

Gauges, Hood Pins, Dzus Fasteners & Brake Calipers Decal Sheet 1/25

Here is a small sheet of decals with digital and analog gauges, hood pins & Dzus fasteners and labels for brake calipers. There are enough decals on this sheet for a few cars. The product photo shown is a representation and may not look exactly...

Blower Belts, Restraint Bags, Chutes & Chassis ID Decal Sheet 1/25

Here is a small sheet of decals specifically for labels on Blower Belts, Blower/Engine Restraint Bags, Parachutes and Chassis Identification.  It even has turbo charger vanes. Contains Diest and Stroud parachute logos and four "Remove Before...

Nitrous & Fire Bottles and Ignition Boxes Decal Sheet 1/25

Need N0S or MSD ignition box decals but don't want to pay for a sheet of decals you will never use? Here is a small sheet of decals specifically for labels on Nitrous Bottles, Fire Bottles and Ignition Boxes. This is cut from a larger decal sheet which...

Drag Slicks,16x33x16 1/25

These Drag Slicks equal a scale 16x33-16 tire.  This is representative of a current Pro Stock drag slick. To determine if these will fit your needs, here are the actual dimensions:Overall Width = .83"Diameter = 1.40"Tread Width = .66"Wheel Opening...

Lever Style Safety Harness Set 1/16

Here is a set of highly detailed lever-lock safety harness hardware. Belt material is not included. Here is a photo of this hardware installed in a '60's short track racer by Matt Zimmerman. Assembly required. Photo etched pieces are made from...

4-Link Suspension Bracket Kit 1/16

This 4-link bracket set includes eight brackets, enough to build one car.  They are patterned after a popular 1:1 bracket.  The hole diameters in the housing brackets are .188", so they can be drilled out to the diameter of your axle housing...

Slotted Rotor 4-Piece Set 1/16

Slotted, 4-rotor set - front and rear. Front rotors equal a scale diameter of 10". Rrear rotors equal a scale 11.75" @ 1/16 scale.   Photo of a real slotted rotor with dual calipers. For a set of drilled rotors check here, or for drilled...

Drag Slicks, 14x32x15 1/25

These Drag Slicks equal a scale 14x32-15 tire.  The tread width equals 14" and the overall width, with sidewalls equals 18". To determine if these will fit your needs, here are the actual dimension:Width including Sidewall = .75"Tread Width = ...

Drilled Rotor 4-Piece Set 1/16

Drilled, 4-rotor set. Front rotors equal a scale diameter of 10". Rrear rotors equal a scale 11.75" @ 1/16 scale. For rear rotors only, click here.   Four pieces, photo etched .015" nickel-silver plate, 1/16 scale.

Drilled Rotor Pair, Large/Rear 1/16

Drilled, large 2-rotor set - These represent a scale diameter of 11.75" @ 1/16 scale. These would be used as rear rotors.  For a set of front and rear rotors, click here.   One pair, photo etched .015" nickel-silver plate, 1/16 scale.

Injector Butterfly Set for Competition Resins Injector Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resin's '70's Ribbed injector hat.  They measure .215" diameter and may fit your...

Centerline Drag Star Wheels, Resin 1/25

A set of four Centerline Drag Star Racing Wheels - front and rear. Wheel details are sharp and crisp. Rear wheel is .70" OD.  Overall width is .35".Front wheel is .66" OD. Consists of 4 total pieces and does not include rear (or backing) rings...

Motorwheel Pro Stock Wheels Front & Rear 1/25

A set of four Motorwheel P/S Racing Wheels - front and rear. Contains 2 pairs resin wheels, 1/25 scale.

Pro Mod - Pro Stock D Shaped Opening Hood Scoop 1/25

A raised hood scoop for that PM or PS racer with a 'D' shaped mouth opening. See also similar hood scoops with a Round Opening or Square Mouth Opening.Molded in one piece. Contains 1 resin scoop, 1/25 scale.

Pro Mod - Pro Stock Square Opening Hood Scoop 1/25

A raised hood scoop for that PM or PS racer with a square mouth opening. See also similar hood scoops with a Round Opening or 'D-Shaped Opening. Molded in one piece. Contains 1 resin scoop, 1/25 scale.

Dragster or Fuel Altered Front Tires 1/16

Skinny front tires for wire or spoked wheels, as found on dragsters and altered. Measurements: 1" OD 0.7" ID These tires fit the Comp Resins 12-spoke wheels found here. Contains 1 pair rubber-like tires.

Halibrand Front Wheels 1/25

A pair of slotted Halibrand front wheels.     Contains 2 resin wheels 1/25 scale.

MOON 392 HEMI Valve Covers 1/25

A pair of ribbed Moon 392 HEMI valve covers with spark plug holes already drilled. Contains 2 resin pieces.

Pro Mod / Funny Car / Pro Stock Rear Wing 1/25

Includes main horizontal wing, sides and support rods. This wing can be made to fit many different race classes.   Here are some examples of what can be done.     Resin, 1/25 scale

Dual Nitrous , O2, Fire or Air Bottle Pair 1/25

Here are a pair of bottles that can be used for nitrous, fire, compressed air, oxygen, etc. Mount them in the interior, at the rear or ahead of the engine. Add a NOS decal found here, if this is the intended use for these bottles.  The 'small' size...

Cragar Super Trick 8-hole Rear Wheels 1/16

Cragar Super Trick, 8-hole rear drag racing wheels. Fits Revell tires...

Pro Stock / Super Stock Drag Slicks 1/25

Drag Slicks for your Pro Stock, Super Stock or other race car.  Dimensions are listed below to see if they fit your needs. Each side of these tires will accept a different size wheel.                 ...

Lenco Transmission 4-Speed/Reverse, Manual Shift 1/25

This is a complete Lenco transmission configured for 4-speeds with reverse. It is a one-piece unit including 3D-printed shifter levers (the shifter levers are really small and easy to loose). The front section contains gears 1 and 2 and is...

Door Lever Set - Doorslammer or Street Machine 1/16

Door car levers to detail that race car or street machine interior.  These levers can be used in any type of build. They can be used for interior or exterior handles as well as parachute or other release leavers. Photo etched .010...

Injector Butterfly Set for Competition Resins Shotgun Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resins 2-Hole Shotgun injector hat (part #148).  Click here to see the 1/16 injector hat...

Injector Butterfly Set for Competition Resins Enderle Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resins Enderle injector hat (part #035).  Click here to see the 1/16 injector hat...

True Scale Searchlight Signal N Scale (double lens, photoetched, non-LED)

PRO TECH's True Scale Signals are high quality photoetched signals (non-LED).   They are designed from real life railroad signal dimensions to produce a true scale appearance. PRO TECH's True Scale (non-LED) Signals are high quality photoetched...

Coil Over Shock Kit 1/25

Here is a complete, realistic appearing, coil over shock kit, with all of the parts needed to detail your suspension. Kit includes:    3D-printed 2-piece shock bodies Resin lower extensions RB Motion rod ends Nickel-silver...

Front Strut Suspension Kit with Drilled Rotors 1/25

Here is a complete front strut kit, with all of the parts needed for a detailed front suspension. This is a static suspension and not functional. This set is for 5-bolt hub mounted wheels. Kit includes (28 pieces): 3D-printed strut bodies/spindles...

4-Link Pro Mod Suspension Kit (also fits Dana) 1/25

This kit represents the current heavy duty style of 4-link kits found on high horsepower Pro Mod drag cars. Also included in this kit is anti-roll bar linkage and arms. No torsion bar/tube is included and must be scratch built. Included are four .050"...

Wheelie Bar Housing Kit 1/25

Here is a Wheelie bar wheel housing kit designed for today's PM, FC, ADRL, SS, and others. Includes PE wheel housing and PE wheels which must be assembled. 3D-printed wheels are also included along with 2 pieces of telescoping rods and two hex pins...

Lenco Shifter Lever Set 1/25

You need a set of these Lenco shifters for your Pro Mod or other drag car.  Adds realism and detail to your build. Contains set of levers, brackets, linkage and instructions.. Make sure you click on the product photo above, to enlarge it, to...

Small Block Engine Crank Trigger 1/25

Here is a Crank Trigger kit, for a small block engine and especially for the small block Chevy. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a...

Big Block Engine, Crank Trigger 1/25

Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a distributor triggered system. A crank triggered system can often make more power and produce more...

Cockpit Detail Set, Funny Car, Top Fuel 1/16

This cockpit detail set will finish off your Funny Car or Top Fuel racer. Enough for two cars. Set includes (2 each): Butterfly steering wheel    Handle grips (4 per wheel) Dragster-type accelerator pedal Hand brake lever  ...