1/25 - 1/24 Scale

American Trak Star Front Wheels 1/24

American Racing TrakStar Front Wheels  This is 5-bolt mounted, not spindle mounted. Brand new and I only have a limited quantity to start with. These American Racing front wheels match the Trak Star rear wheels.   Here's a  photo of...

Weld Magnum Rear Wheels 1/24

A pair of Weld Magnum rear wheels In 1/24 scale. Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions  Wheel dimensions:Width .730"Outside Diameter .730" Note the difference between the 1/24 version (left) and the 1/25...

Billet Specialties Comp7 Rear Wheels 1/25

A pair of Billet Specialties COMP7 rear wheels in 1/25 scale.Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions   Wheel dimensions:Width .730"Outside Diameter .730" Note the difference between the 1/24 version (left) and...

Weld AlumaStar Rear Wheels 1/25

A pair of Weld AlumaStar rear wheels In 1/25 scale. Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions Matching front wheels are also available. Note the difference between the 1/24 version (left) and the 1/25 version...

Injector Velocity Stacks 1/25

Shiny aluminum injector stacks (tubes) for that early style Hilborn injected engine. Dimensions:Length: .62", (5/8")Diameter - OD (tube): .125", (1/6") These stacks are hollowed and flared at the top and solid at the bottom They can also be used as...

BBC 572 Tunnel Ram, 2-Carb Engine, 3D 1/25

A 3D-printed BBC 572 with tunnel ram intake and dual carbs. Ideal for that screaming street machine or hot rod. Excellent detail and it has locating tabs for easy assembly and alignment of parts. Engine includes:    572...

Ignition Wire, Red, .016"

Small solid core red wire for ignition components as well as any wiring needs. Wire diameter is .016"   One roll, 2' long, by Detail Master.

Seat Belt Hardware and Belt Material (var colors), 1/25

Photo etched lap seat belt hardware with colored, textured belt material. One package will make 24 seat belts. The buckle hardware has logos stamped into the surface. 12 Generic square logo 8 GM logo 4 Mustang Horse logo Available...

Battery Cable, Red 1/24-1/25

Black spark plug cable with a solid copper core and vinyl coating. This will hold its shape when bending. It is .019" diameter. Package contains 3 linear feet.   Detail Master, 1/24-1/25 scales.

Battery Cable, Black 1/24-1/25

Black spark plug cable with a solid copper core and vinyl coating. This will hold its shape when bending. It is .019" diameter. Package contains 2 linear feet.   Detail Master, 1/24-1/25 scales.

Long Aero III Pro Stock Hood Scoop, 1/25

A long, rectangular-opening Pro Stock Hood Scoop. It's designed to rest against the windshield and may have to be adjusted to fit your windshield angle. This is a longer version of the Aero II P/S hood scoop. Length 2.00 inWidth .735 in. Molded in one...

Rodger Brogon's GXP Pistonator or Graphics Decal Sheet 1/25

This decal sheet will replicate Rodger Brogon's GXP Pistonator Pro Stock, but it also has many graphic images to use on different cars. Use this decal sheet to replicate Roger's Pro Stock racer using this body. It also has many sponsor decals along...

Long Haul, Big Rig Trucking Decal Sheet, 1/25

This decal sheet is perfect for your long haul truck, van or diorama.   Decals included: Consolidated Freightways (logo and stripes) Willig Mason-Dixon Associated Transport McLean Trucking ICX - Illinois-California Express Large and small decals...

Radiator Shroud Set 1/25

Here is a combination of a resin radiator, shroud and and fan-surround.    Radiator dimensions: Width at the base is 1.06" Depth (front to rear) is .420" The ID at the rear most part of the fan enclosure is .615".   3 resin pieces,...

Black Resin Strange Ultra Rear End & Brake Kit 1/25

This is a new version of Futurattraction's excellent Strange rear end.  The rear and axle tubes are cast in black resin and the carrier section is cast is silver resin.  The results makes it look more like the real thing without having to...

Pro Stock Decal Sheet, Glidden-Allen, 1/25

Although this sheet is made for the '72 Glidden & Allen Pinto, it has the sponsors and graphics for an era-specific car.   The '72 Pinto body can be found here. Includes: Hurst Accel Hooker Headers Holley Valvoline NHRA Mr Gasket...

Delivery Van Decal Sheet, 1/25

Here is a sheet of shipping and brand decals for your truck, van or diorama. These decals look good on the sides of your truck or on signs for your diorama. Decals included: USP Federal Express Ryder US Mail Wonder Bread Frito Lay Large and small...

Mooneyes Car Club Plaque Set 1/25

A set of four different styles of Mooneyes Car Plaques. Three are the size and shape of license plates and would look great on the front of cars that only have a rear state license plate. Can be installed in the exterior or interior or both...

Spark Plug Wire Loom Set, Modern 1/24-1/25

This is referred to as 'Street Rod' Wire Looms, but the designs and shapes included could be the perfect fit for your engine. Includes four pairs of different styles, plus the typical wire separators for one to four wires. These have a good shine to...

Service Truck, Gas Station, Wrecker Decal Sheet, 1/25

This is just what you need to detail that service truck, tow truck or diorama gas station. These decals look good on the sides of your truck or on signs for your diorama. All of the decals relate to auto repair, associated trucks and service vehicles...

Aluminum Pulley 4-Set, 1 & 2-Grooves, 1/25

A set of four spun aluminum V-groove pulleys. This is packaged as a Flathead pulley set but can be used for most any engine requiring smaller single groove pulleys. Consists of four pulleys in three sizes: Crank pulley (2-grooves) Water pump...

Aluminum Pulley 4-Set, 1-Groove, 1/25

A set of four spun aluminum V-groove pulleys. This is packaged as a Flathead pulley set but can be used for most any engine requiring smaller single groove pulleys. Consists of four single groove pulleys in two sizes: Crank pulley Water pump pulley Fan...

Pro Street License Plate Decal 1/25

A pair of license plate decals with PRO STREET written on the face. These are New Your plates with a red Statue of Liberty on the left side. The lettering is in blue.   Two decals on one sheet, by VCG Resins, 1/25 scale

Windshield Wipers - Solid Blade 1/24-1/25

These wipers are common as billet aluminum straight arm and blade on street rods. The set contains a pair each of 4 different length arms and matching blades.   One photo etched sheet by Detail Master, 1/24-1/25 scales.

Performance Gauges, White Face & Bezels 1/24-1/25

Small group gauges with black details on a white background. These gauges are grouped into singles and sets of two and three. All gauge faces are the same diameter. These gauges are 'performance' related and used for separate oil pressure, volts, amps,...

Soft Line - Red .016", .4mm OD

This is a small, soft, solid, semi-shiny line.  It can bend at a sharp angle without kinking.See Size A1 Ferrules for this soft line. This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 3/8"1/16 scale = 1/4"1/12...

Soft Black Line - Hose .016", .4mm OD

This is a small, soft, solid, semi-shiny line. Can be used for real life 9mm spark plug wires. They would drape like the real thing. It's the perfect size for those small injector lines to the manifold and injector hat. It can bend at a sharp angle...

Soft Clear Line - Hose .008", .2mm OD

This is really small, soft, solid, clear line . You can barely see it, but if you need a really small clear line, this is it.This could be used for a 1/25 radiator overflow tube, small carburetor fuel lines, or other clear line needed.  This soft...

Soft Clear Line - Hose .012", .3mm OD

This is a pretty small soft, solid, clear line . It's the perfect thing for those small fuel lines at the engine.  It can bend at a sharp angle without kinking.See Size A1 Ferrules for this soft line. This soft line equals the following...

Wheelie Bar Double X Frame, 1/25

Lower Wheelie Bar Frame  Modern Style - Double X Design.  Building wheelie bars in 1/25th scale is challenging.  It can be difficult to get longitudinal tubing members parallel to each other and mirror each other, while also being cleanly...

LS, BBC EFI Ram IntakeManifold, 1/25

A 3D-printed EFI manifold for a BBC or HEMI engine. This is one of my latest designs which I'm also making in a CNC machined aluminum version. With low restrictive rounded runners for maximum horsepower as well as improved low end torque for great...

19" Chrome T's Wheels & Tires (2 pair) 1/24-1/25

A set of four deep dish, 5-spoke, chrome wheels with low profile tires.   This is a set of 19" wheels which can be combined with 23" T's for the 'big & little' look.   These wheels look like the new style American Torque...

CL's 23" Wheels & Tires 4-Set 1/24

A set of four chrome wheels with low profile tires. This is a set of 23" wheels which can be combined with 19" CL's for the 'big & little' look. Sidewall and tread width is .45" (29/64")   Like the wheels but don't want low profile tires? ...

Engine Pulley Set, Star Design, 1/25

A different type of pulley set. These are photo etched and the pieces stack to give the pulley depth. You could also cut a piece of round styrene or aluminum rod or tube as a spacer between the pulley faces. Pulley face has a spoke or star pattern plus a...

Engine Pulley Set, Circle Design, 1/25

A different type of pulley set. These are photo etched and the pieces stack to give the pulley depth. You could also cut a piece of round styrene or aluminum rod or tube as a spacer between the pulley faces. Pulley face has 6 round holes plus a hole in...

Peterbilt 359 Wrecker Truck 1/25

This makes one large model with lots of detail. The box is factory sealed with shrink wrap Super Detailed Large 1/25 Scale Fully Detailed Cab, Engine, Drive Train, Interior and ChassisNewly Tooled Tires with Pad Printed Firestone SidewallsLoads of...