Engine Related

Battery Cables or Electrical Lines, Red and Black .030"

These red and black lines have a .030" diameter. They have a solid core and will bend easily without kinking.  It can also be straightened out and is firm enough to hold its shape. Depending on your scale, typical uses are large battery calbes,...

Battery Cables and Hardware Set, 1/25

Here's a complete battery cable set. Includes red and black wire plus a photo etched plate with battery terminals, hold down straps, aluminum rod for the terminal posts and more. The solid core will hold its shape when formed into place. Each package...

Ignition Coils and Straps 1/24-1/25

Two machined aluminum coils with photo etched straps.   By Detail Master, 1/24-1/25 scales.

Blower Scoop Hardware Set 1/24-1/25

Everything you need to detail that blower and injection hat. Includes: Blower and hat hold-down platesSpark plug wire loomsAssorted bracketsLinkage fittingsIntake butterfliesBlower belt safety guardand moreStainless Steel and shiny right out of the...

Engine Bracket Accessory Set 1/24-1/25

A photo etched sheet of detailed brackets for your engine accessories. Includes brackets for an alternator, power steering, A/C, etc. You might have another accessory like an oil pump or other item that needs a bracket. This set contains two of...

Black Ferrule Fittings for Braided, Soft, Hard Lines

The latest trend in TF or FC is black fuel lines with black anodized fittings. You see them for blower injector lines, Injector-hat injection lines and more. These lines are black braided lines with black anodized AN fittings.  Typically these...

Belt Material - Serpentine, V-Belt, Accessory 1/25

This rubber, stretchable belt material can be used for many purposes. The 3" long strip is ribbed lengthwise and can be separated for the width you need.  Simply cut the length desired and glue it at the underside of the crank or other pulley...

Dual Style Battery 1/25

A a pair of older style batteries with 2 long filler caps on the top. Shows a strap around the batteries and long filler caps with top posts.  Here is how to wire the batteries together.   1 resin piece, by Pegasus Hobbies, 1/25 scale...

Dual Quad Tunnel Ram Manifold 1/25

Set a pair of Dominator or Demon carbs on top of this manifold. Make sure you have room under your hood or cut a hole in the hood to allow for the height. Overall height is .43" (7/16"). Here's a photo of a real dual quad setup byRich Vitiritti. ...

Electric Fuel Pump & Filter 1/25

An electric fuel pump with a fuel filter similar to the MagnaFuel pump.     Here's a photo of the real thing     One resin piece, by Pro Tech, 1/25 scale.    

Spark Plug Wire Loom Set 1/25

A nice set of photo etched wire looms. Spreaders are in 2, 3 and 4-hole configurations. If using soft .020" (or smaller) rubber wires, use the looms as they are. If using solid wire, It is necessary to "clean up" the holes with a .020" bit so wires will...

Flowmaster Mufflers, Pair 1/25

A pair of nicely made and realistic looking offset inlet/outlet mufflers. These are 3D-printed with FLOWMASTER in raised letters on one side. Two 3D-printed muffler clamps and a Flowmaster decal is included for each muffler. Mount the muffler upside...