Shop by Manufacturer

Pointed Back Headlights, Polished 1/25

A pair of polished aluminum headlights with a cone shape. Includes: Aluminum headlight bodies, polished Plastic lenses. The bodies have a hole in the bottom for mounting Dimensions: OD: 19/64"Depth: 3/16"   Aluminum and plastic pieces,...

Megaphone Exhaust Tips ,1/25

A pair of aluminum exhaust tips with an angled flared end. This is hollow and looks realistic. Dimensions: Inlet Diameter: 1/8" Outlet Diameter: 3/16" (flared end) For 2-1/2" exhaust pipes to match, use .112 aluminum hard line. This is almost the same OD...

Salt Lake Style Moon Wheel Covers 15" 1/25

A set of four spun aluminum large Moon hubcaps. These are found on early custom cars and often found on Salt Lake racers. This is made of solid aluminum and has a flat back. Measures 5/8" diameter or a scale 15". Four aluminum pieces by Parts by Parks,...

Salt Lake Style Moon Wheel Covers 16" 1/25

A set of four spun aluminum large Moon hubcaps. These are found on early custom cars and often found on Salt Lake racers. This is made of solid aluminum and has a flat back. Measures 11/16" diameter or a scale 16". Four aluminum pieces by Parts by Parks,...

Pulley Set #6 Polished 1/25

A set of four polished aluminum V-groove pulleys with belt material. The face of the this pulley set is smooth and slightly cone shaped where the center is pointed outward, except for the crank pulley. Consists of four single groove pulleys: Crank...

BBC Milodon Valve Covers 1/25

Tall Milodon valve covers with MILODON spelled out. These valve covers have horizontal grooves running lengthwise. Contains 2 resin pieces.

BBC M/T Valve Covers 1/25

A pair of BBC or HEMI valve covers with a filler cap on the end of each one. Contains 2 resin pieces.

Altered or Small Wing 1/25

A small wing for any use, but a fuel altered is an example. Has teardrop end plates. Measurements: Length: 1" Width: .62" Contains 1 resin piece, 1/25 scale

Top Fuel Wheel Set 1/25

A set of four Racing Wheels for a TF dragster - front and rear. Features a thin front wheel with a deep rim in order to make sure the timing lights are tripped at the end of the quarter mile. The 2-piece front wheel will accept the 'bicycle tire' found...

Black Coated Hard Line .016", .4mm Dia

This hard line has a glossy black coating over a wire and lends a different look to your build. It holds its shape and can be bent at tight angles without kinking. Equivalent 1:1 size at each scale. 1/25 scale = 3/8"1/16 scale = 1/4"1/12 scale =...

Model Master Gelb RLM 04 Acrylic, 1/2oz Bottle

This can be thinned, in order to flow better, with an Acrylic Thinner.   By Testor's, one 1/2oz bottle.

Fenton/Anson Front Wheels 1/25

A pair of 5-slot Fenton (or Anson) front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Gasser Front Wheels, but these have larger slots  OD = .67", 17mm Overall Width = .19", 5mm   The wheels that will...

Einstein Blower Hat and Base 1/25

Here's a different blower hat.  It's similar to the Janis style. Includes a plate with an injector distribution block. Overall height is 1.00". Three pieces in resin   By Competition Resins, 1/25 scale.    

S.C.O.T Blower 1/25

Here's a special blower for that Flathead engine. S.Co.T. is an abbreviation for 'Supercharger Company of Turin' (Torino), Italy. It was one of the most popular "roots" style blowers in the 1950's and popular today on Street Rods and Rat Rods...

GM TH350 3-Speed Transmission 1/25

A nicely detailed General Motors 350 Turbo Hydromatic transmission. Molded in one piece with bellhousing. By Competition Resins, 1/25 scale

Pirelli Type Small Front Racing Tires 1/25

These front tires will work for a Gasser as well as a Pro Mod or street racer. These are slightly smaller than the Futurattraction Front Runner tires. These are semi hard tires but still flexible. Measurements:Outside Diameter = .98"Overall width = ...

Good Year Dragster Slicks 1/25

These are labeled '60's Goodyear Dragster Slicks but depending on the size you want, these will work for any racer. "Good Year" is in raised letters on both sides. These are slightly smaller than the Comp Resins' Pro Stock slicks. These are fairly...

Black Coated Hard Line .080", 2.05mm Dia

A glossy black hard line that holds its shape and doesn't kink at tight angles. This hard line equals the following equivalent 1:1 size at each scale.1/25 scale = 2"1/16 scale = 1 1/4"1/12 scale = 1"1/8 scale  = 5/8"Use Pro Tech Fittings sized...

Black Coated Hard Line .050", 1.29mm Dia

A glossy black coating over a wire will give a different look to your lines. This hard line will hold the bend you want and not kink. Equivalent 1:1 size at each scale.1/25 scale = 1 1/4"1/16 scale = 3/4"1/12 scale = 7/16"1/8 scale   = 3/8"Depending...

Black Coated Hard Line .098", .2.5mm Dia

Here is a glossy black hard line that holds its shape and doesn't kink at tight angles. This is has a solid copper core that makes it pretty stiff. This hard line equals the following equivalent 1:1 size at each scale. 1/25 scale = 2 1/2" 1/16 scale...

Black Coated Hard Line .032", .81mm Dia

This hard line has a glossy black coating over a wire and lends a different look to your build. It holds its shape and can be bent at tight angles without kinking. This hard line equals the following equivalent 1:1 size at each scale.1/25 scale =...

American Trak Star Front Wheels 1/25

American Racing TrakStar Front Wheels  This is 5-bolt mounted, not spindle mounted. Brand new and I only have a limited quantity to start with. These American Racing front wheels match the Trak Star rear wheels.   Here's a  photo of...

Rat Rod Graphics Decals, 1/25

GOFER RACING decals released this sheet of Rat Rod graphics. Includes: "In Rust We Trust" Pinup Girls Eight Ball Iron Cross (2 sizes) Skulls Pirate Flag Dice (2 sizes) Devil Face Confederate Flag Route 66 sign and more   Measures 7" x 4.75" One...

Soft Line - Hose .008", .20mm OD

This is a small black twisted multi-fiber line. It is very flexible and can be bent at sharp anglesThe OD dimension is .008" or .20mm.  This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 3/16"1/16 scale = 1/12...

Soft Line - Hose .010", .25mm OD

This is a black nylon-coated stainless steel multi-strand wire. It is slightly springy and can be bent at sharp anglesThe OD dimension is .010" or .25mm.  This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 1/4"1/16...

HEI Distributor, Tan Cap, Pre-Wired 1/25

An accurate representation of the popular HEI distributor. Pre-wired with your color choice of spark plug wires. The HEI distributor has an internal coil and doesnt need the external canister coil and coil wire. PHOTO OF REAL HEI...

Billet Shifter Knob - Flat Pan 1/24-1/25

A shifter knob, dash knobs or maybe a turn signal knob with a traditional flat pan knob. This looks similar to Lokar's shifter knob. Includes two knobs. This would be perfect with Detail Master's steering column.   Two aluminum parts By Detail...

Heavy Duty 4X4 Transmission 1/25

A nicely detailed Heavy Duty transmission for your 4X4.   Resin, 2 halves, by VCG Resins, 1/25 scale.

Drag Racing Quarter Panel Sheet #2, 1/25

1/25 scale miscellaneous decal sheet. This has something for everybody - Rat Rods, Gassers, Drag Racing and more. Includes: Early-year California license plates Doug's Headers Howard Cams 3 sizes of Iron Crosses Dodge and Mopar Many...

Drag Racing Quarter Panel Sheet #1, 1/25

1/25 scale manufacturers' decal sheet. Consists of current companies, fictitious companies and graphics.   One sheet. by SLIXX Decals, 1/25 scale.

Round Back Headlights, Satin 1/25

A pair of satin aluminum headlights with a cone shape. Includes: Aluminum headlight bodies, polished Plastic lenses The bodies have a hole in the bottom for mounting   Dimensions: Diameter at lens - 19/64"Depth -...

Round Back Headlights, Polished 1/25

A pair of polished aluminum headlights with a cone shape and rounded back. Includes: Aluminum headlight bodies, polished Plastic lenses The bodies have a hole in the bottom for mounting Dimensions: Diameter at lens - 14/64"Depth -...

Bomber Seats (2) Set #1 1/25

A pair of bomber seats for that hot rod, rat rod or other project. Instructions are not included, but here is a link to a PDF file showing assembly. Photo etched and assembly is required.   Two seats, by Highlight Model Studio, 1/25 scale.

License Plate Frames, 8-Set 1/24-1/25

A set of 8 license plate frames. Realistic looking with plate mounting tabs. Enough for four cars (2 plate states) or eight cars (single plate states).   One photo etched sheet by Detail Master, 1/24-1/25 scales.

Inferno Skull Steering Wheel 1/24-1/25

Wild flames in your hands. Includes two horn buttons and other detailing items with instructions. Horn button can be a standard round button or a skull button. The photo above makes the outer rings look like rubber, but they are actually stainless steel...

2-Spoke Billet Steering Wheel 1/24-1/25

A custom billet steering wheel. Includes a horn button and other detailing items with instructions. The photo above makes the outer rings look like rubber, but they are actually stainless steel.  This can be left as is or painted.  Makes one...