Engine Related

MSD Pro Mag 44 Pre-Wired 1/25

Here's a 3D-printed MSD Pro Mag with your color choice of spark plug wire already installed.Drill a hole in your block and insert this MSD magneto. Route the wires to the spark plugs and don't forget the Spark Plug Boots, for even more detail. Specify...

Injector Stacks - Long 1/24-1/25

Smaller, polished aluminum injector stacks for a Hilborn style induction system. Pack contains 8 stacks, polished aluminum with a flared top. . The stacks are hollow with a 'pin' at the bottom for easy mounting Dimensions per back of...

7-1/2" Diameter Dual Air Cleaners, 1/24-1/25

A pair of small air cleaners that will fit a 4bbl carb. At 1/24 scale they equal 7.5" diameter At 1/25 scale they equal 7.8" diameter. It consists of a semi-coned aluminum top and flat aluminum bottom, with screen material in between. Here is an...

Weber Small Velocity Stacks 1/24-1/25

This will add that special detail to your Weber induction system or you may find other uses for them. They are hand turned, solid, billet aluminum stacks and there are no seams. They can be used on a standard kit engine.  The bottom diameter is ...

4-Pulley Set, 2-Grooves, 1/25

A set of four spun aluminum V-groove pulleys. Consists of: 1 Double groove crank pulley 1 Double groove water pump pulley 1 Large single groove accessory pulley 1 Small single groove accessory pulley Belt material   NOTE: The diagrams on the...

Holley Split Dominator & PE Details, Pair 1/25

Holley Split Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage Contains 4 split carbs and PE details.   Photos of completed carbs are for illustration only. Assembly required. 3D-printed and photo etched parts by...

NoS or Fire Aluminum 2-Bottle Set with Upright Holder 1/25

You won't find a more realistic upright nitrous oxide bottle set than this one.  Use one as a fire bottle if you have a plumbed fire suppression system. These 10 lb bottles are made for an upright position... Includes: CNC'd aluminum bottles ...

Nut & Bolt Set - Photo Etched

Photo Etched bolt and nut flat heads,  Nut features a protruding bolt. Offered in 3 sizes to fit your needs. The dimension is measured across the flats.Mounted on a soft back so no cutting of parts is necessary (means less lost...

Liberty Transmission Shifter Lever Set 1/25

You need a set of these Liberty shifters for your Door Slammer or other drag car.  Adds realism and detail to your build. Contains set of levers, brackets, linkage and instructions..   Photo etched, .015" nickel-silver plate. 1/25 scale.

Chevy 409 Blown Engine 1/25

A blown Chevy 409 engine. A Revell kit engine from a '55 Chevy. Items Included Block (3-pieces)HeadsOil pan409 chrome valve coversChrome BlowerChrome timing coverBlower belt with pulleysChrome Inline injectorsBellhousingTransmissionStarterDrop...

Injector Stacks, Tall 1/24, 1/25

A set of eight machined aluminum tall, flared, injector stacks. Hilborn Style Injector Stacks 5/32 x 3/32 x 1/2. Eight aluminum stacks by Parts by Parks, 1/24-1/25 scale.

Chevy 409 Performance Engine, 3D 1/25

A 'hot' 409ci Chevy engine in an Edelbrock performance configuration. Includes every detailed part except a transmission.  A Powerglide or TH400 would be appropriate. Choose either an Edelbrock air cleaner or a 'bug catcher' scoop. Engine Kit...

Chevy 409 4-Pulley Set, 2-Grooves, 1/25

A set of four spun aluminum V-groove pulleys, whether for a 409 or any other engine.. Consists of: 1 Double groove crank pulley 1 Double groove water pump pulley 2 Small single groove accessory pulleys Belt material   Please see the...

Chevy 409 5-Pulley Set, 2-Grooves, 1/25

A set of five spun aluminum V-groove pulleys, whether for a 409 or any other engine.. Consists of: 1 Double groove crank pulley 1 Double groove water pump pulley 1 Large single groove accessory pulley 2 Small single groove accessory pulley Belt...

Injector Stacks - Small 1/24-1/25

Smaller, polished aluminum injector stacks for a Hilborn style induction system. Pack contains 8 stacks, polished aluminum with a flared top. . The stacks are hollow with a 'pin' at the bottom for easy mounting Dimensions per back of...

Holley Dominator Carb & PE Details, Pair 1/25

Holley Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage.  These carbs were drawn in CAD and capture as many features as possible of Holley's decades-famous Dominator race carb. The carb bodies are 3D-printed and are...

Injector Velocity Stacks 1/25

Shiny aluminum injector stacks (tubes) for that early style Hilborn injected engine. Dimensions:Length: .62", (5/8")Diameter - OD (tube): .125", (1/6") These stacks are hollowed and flared at the top and solid at the bottom They can also be used as...

Aluminum Pulley 4-Set, 1 & 2-Grooves, 1/25

A set of four spun aluminum V-groove pulleys. This is packaged as a Flathead pulley set but can be used for most any engine requiring smaller single groove pulleys. Consists of four pulleys in three sizes: Crank pulley (2-grooves) Water pump...

Engine Pulley Set, Star Design, 1/25

A different type of pulley set. These are photo etched and the pieces stack to give the pulley depth. You could also cut a piece of round styrene or aluminum rod or tube as a spacer between the pulley faces. Pulley face has a spoke or star pattern plus a...

Engine Pulley Set, Circle Design, 1/25

A different type of pulley set. These are photo etched and the pieces stack to give the pulley depth. You could also cut a piece of round styrene or aluminum rod or tube as a spacer between the pulley faces. Pulley face has 6 round holes plus a hole in...

Pulley Set #6 Polished 1/25

A set of four polished aluminum V-groove pulleys with belt material. The face of the this pulley set is smooth and slightly cone shaped where the center is pointed outward, except for the crank pulley. Consists of four single groove pulleys: Crank...

4-Pulley Set #3 Smooth 1/25

A set of four polished aluminum V-groove pulleys with belt material. The face of the this pulley set is smooth and slightly cone shaped where the center is pointed outward, except for the crank pulley. Consists of four single groove pulleys: Crank...

4-Pulley Set, 1-Groove 1/25

A set of four spun aluminum V-groove pulleys. Consists of four single groove pulleys: Crank pulley Water pump pulley Large accessory pulley Small accessory pulley Belt material NOTE: The diagrams on the reverse side of the header card do not match what...

Engine Bay Tin, '69 Camaro 1/25

This tin work fits Revell's 1969 Camaro. Great for that pro street or race car look!t This is a Tight fit and may require a bit of filing on the outer edges.   Photo etched, 1/25 scale, by Futurattraction.

Engine Bay Tin, '67 Camaro 1/25

This tin work fits Revell's 1967 Camaro. Great for that pro street or race car look!t This is a Tight fit and may require a bit of filing on the outer edges.   Photo etched, 1/25 scale, by Futurattraction.

Round 14" Aluminum (Custom Style) Air Cleaner 1/25

This machined aluminum air cleaner is equal to a real world 14" w x 3" h.  It would be typically be found on a single carburetor.Includes photoetched wing nut and simulated filter element. The actual diameter is .56" or 14.2 mm. Photo of this air...