Shop by Manufacturer

SBC Tunnel Ram & Lenco 1/25

An all new, highly detailed, complete 429cid Ford engine with the Boss 429 cylinder head/valve cover combo. Perfect for that '80s to '90s Pro Stock racer. Included is everything needed to build a well detailed, carbureted engine with a...

'23 T Fuel Altered Tubular Full Chassis, 1/25

A complete one-piece 3D-resin-printed chassis. This fits Competition Resin's '23 T Altered body, but it may fit your needs too (see dimensions below). Made of resin so easy modifications can be made by cutting, sanding and use of CA glue...

Front Strut Spindle Suspension Kit with Drilled Rotors 1/25

Here is a complete front strut kit, with all of the parts needed for a detailed front suspension. This is a static suspension and not functional. Kit includes (28 pieces): 3D-printed strut bodies/spindles (resin pieces shown in photo) Aluminum tube...

Front Strut Kit for Aluminum Wheels, TBM Rotors 1/25

This is a complete 28 piece strut front end kit for 5-bolt wheels (a strut set for spindle wheels is found here. The nose of the 3D spindle is designed to center in Futurattraction's 5-bolt wheels and includes 3D-printed hubs to fit to the back...

Dragster Wire Wheels with Light Shield 1/25

Real wire wheels with real spokes and one wheel has a 'light shield' on one side for newer dragsters. The light shield provides a larger area for the timing light to trigger at the end of the strip. Fully assembled and includes rubber O-Ring tires...

Weld V-Series Rear Wheels 1/25

A pair of Weld V-Series rear wheels.Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions Wheel dimensions:Width .730"Outside Diameter .730" Note the difference between the 1/24 version (left) and the 1/25 version (right) below...

Starlight Rear Wheels 1/25

A new custom wheel design by Futurattraction.  These match Futurattraction's front spindle-mount wheels   They are the same 5-point star design and can also use a color-coordinated (front or rear half) paint scheme. Includes: CNC...

Pro Stock Slicks 1/16

These slicks replicate those labeled as 17x33.5-16.  There are no raised letters on these slicks.  If you want Good Year, Hoosier or M/T names on the tires, check out these 1/16 decals. These slicks are made of a soft rubber.  This...

Fiat Fuel Altered Body 1/25

  An iconic drag racing body from the early '60's to today. Newer versions use a longer wheelbase for more stability. Features: One-piece body Use a Modified Early Model Revell Funny Car Kit for Chassis Body Color -...

Dragster Wire Wheels 1/24

Finally, a wire wheel with real spokes that looks realistic. Fully assembled and includes rubber O-Ring tires. For a textured/treaded bicycle tire, look here. These fit perfectly. Featuring small hubs and thin-walled rims for a...

Dragster Wire Wheels 1/25

Finally, a wire wheel with real spokes that looks realistic. Fully assembled and includes rubber O-Ring tires. Featuring small hubs and thin-walled rims for a proportional appearance.   The hub utilizes 3/32" aluminum tubing that will fit...

Weld V-Series Front Wheels 1/25

A pair of Weld V-Series front wheels to match the VSE rear wheels.Includes: CNC Aluminum Rings 2-Piece PE Centers Instructions  These are hub-style mount wheels, NOT spindle mount.            Photo of real...

Weld Delta 1 Rear Wheels 1/24

A pair of Weld Delta 1 rear wheels in 1/24 scale. These are one-piece CNC machined aluminum wheels. Includes: CNC Aluminum Rings PE Centers Instructions    PHOTO OF REAL DELTA 1 WHEEL WITH A BEADLOCK RING (not included) Wheel...

Billet Specialties Comp5 Front Wheels 1/25

A pair of Billet Specialties front wheels in 1/25 scale.Includes: Outer Rims Inner and Outer Center Inserts Hubs Instructions A Front Strut spindle kit is available for these wheels.  The nose of the spindle is designed to...

Weld AlumaStar Rear Wheels 1/24

A pair of Weld AlumaStar rear wheels In 1/24 scale. Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions Matching front wheels are also available.   Note the difference between the 1/24 version (left) and the 1/25...

Ford Boss 429 & Lenco 1/25

An all new, highly detailed, complete 429cid Ford engine with the Boss 429 cylinder head/valve cover combo. Perfect for that '80s to '90s Pro Stock racer. Included is everything needed to build a well detailed, carbureted engine with a...

Front Strut Suspension Kit with Drilled Rotors 1/25

Here is a complete front strut kit, with all of the parts needed for a detailed front suspension. This is a static suspension and not functional. This set is for 5-bolt hub mounted wheels. Kit includes (28 pieces): 3D-printed strut bodies/spindles...

Dragster Wire Wheels 1/16

Finally, a wire wheel with real spokes that looks realistic. Fully assembled and includes rubber O-Ring tires. Featuring small hubs and thin-walled rims for a proportional appearance.   The hub utilizes 3/32" aluminum tubing that will fit...

NoS or Fire Aluminum 2-Bottle Set with Upright Holder 1/25

You won't find a more realistic upright nitrous oxide bottle set than this one.  Use one as a fire bottle if you have a plumbed fire suppression system. These 10 lb bottles are made for an upright position... Includes: CNC'd aluminum bottles ...

66 Pro Street Nova 1/25

FEATURES Molded in blue and clearChrome and black vinyl tiresTubbed chassisWide slicksHi--rise manifoldHood scoopDecalsIllustrated instructions Includes displayable engine stand and engine block New in unwrapped box. AUTOMATICALLY...

67 Chevelle Pro Street 1/25

1967 Chevy Chevelle Pro Street This kit features interior with textured seats, molded gas tank, full suspension and shocks, detailed engine, detailed steering wheel and dashboard, and accurate body details. The rear tire choice is my favorite. ...

Pro Mod / FC Slicks 1/16

If you're looking for the biggest meat to stick under those wheel tubbs, you just found it.  These are the largest 1/16 slicks on the market. There are no raised letters on these slicks.  If you want Good Year, Hoosier or M/T names on the...

Roof Rack, Photo Etched 1/25

Something that will set your model apart from others - a Roof Rack. A photo etch sheet that will assemble a car roof rack. Measures approximately 2" long by 1-3/4" wide. Includes attachment pieces if your car has drip rails. If not, you'll have to...

1929 Ford Model A Hot Rod Pickup with Chopper Bike 1/25

Here is a great combination of a hot rod pickup and street chopper motorcycle. This ain't your mom's grocery-getter pickup truck.This is a '60's style 'phone booth' cab pickup. Detailed undercarriage and suspension with mag wheels and wide whitewall...

Pin Flow Applicator for Liquid The Glue

For a precise, small application using a needle-tip for no glue runs. I've tried needle-type glue applicators in the past and the problem was that the CA glue would clog before I applied it. Now here is an applicator that works with liquid glue made for...

Meyers Manx Off-Road Dune Buggy, 1/25

Meyers Manx is a very popular 'Buggy'. Build it for off-road racing, or street fun. Start with a VW chassis and twin-carb engine. Build it with or without the body and it also has an optional top. Firestone All Terrain T/C tires are on chrome...

Scenic Rust Weathering Kit

This 3-part system puts a realistic rust-like finish on all types of paintable surfaces (wood, plastic, metal). It's realistic because it uses real powdered rust. Create greater realism for a vehicle, accessories (drums, chains, etc) or a diorama...

"Farmer" Arnie Beswick's 1965 A/FX Comet, 1/25

Arnie "The Farmer" Beswick's 1965 A/FX drag racing Comet.   Besides Beswick, Dyno Don Nicholson, Sox & Martin and Hayden Profit also raced Mercury Comets in '64-'65. You could replicate one of these other cars. Arnie was racing this Comet...

Forward Frame Rail & R&P, .750” Wide, 1/25

 Building your own chassis with a front strut suspension? This Forward Frame Rail will save you a ton of time.This is a one-piece, 3D-printed, front frame and doesn't need any assembly, plus it has a separate rack and pinion with boots. It...

Double 27' Vans with Coupler, 1/25

A pair of highly detailed 27 ft vans, each is 12-1/2" long. Couple one or both, using the converter dolly, to your tractor, like this Peterbilt 359. Add these Wide Turn warning decals for more realism. These sponsor decals would be an ideal...

'57 Chevy Bel Air Street Machine, 1/25

A street machine with all the right stuff. This is AMT's new Kustom Kruisers line of models. FEATURES: Custom mag wheelsBig n' Little tiresOpening hoodBBC 454 engineTrunk fuel cellCoil over shocksDual exhaustsCustom pinstripe decals including license...

"John Wick" '70 Chevelle SS 396, 1/25

Right from the movie, John Wick, starring Keanu Reeves. He drove the heck out of this '70 Chevelle and now you can recreate it. FEATURES:Torq-Thrust wheelsBF Goodrich tiresOpening hoodChevy 396 engine with stock and custom optionsDecals to replicate...

Weld AlumaStar Rear Wheels 1/16

A pair of Weld AlumaStar rear wheels In 1/16 scale to match Futurattraction's AlumaStar 5-spoke front wheels.  These replicate Weld's 16" x 16" wheels. Includes: Deep Outer Rims Inner Wheel Halves Both pieces interlock and a matching line...

Home Depot Pre-Painted Kit #20 Tony Stewart NASCAR 1/24

This is a kit and not a 'snap' type model. Includes glue and opening hood. Features highly detailed chassis and engine. Home Depot's #20 Monte Carlo driven by Tony Stewart. Features a driver figure with a full helmet. Box is unopened, sealed and new...

Home Depot NASCAR #20 Tony Stewart 1/24

Home Depot's #20 Monte Carlo driven by Tony Stewart. Features a driver figurine with a full helmet (see photo). The body lifts off to reveal the NASCAR interior (with Tony) and engine. Box is unopened, sealed and new. Molded in white. Assembly...

Sander Engineering 750 Rear Wheels 1/25

A pair of Sander 750 Series rear wheels In 1/25 scale. Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions  Wheel dimensions:Width .730"Outside Diameter .730" Here's a real world Sander Eng 750 rear...