Ignition Components

Ignition or General Wire, Yellow .014"

This bright yellow wire can be used for any electrical need. It is .014" diameter which is equal in real life to 5/16" or 9mm at 1/25 scale. At 1/16 scale, this wire would be equal to 1/4" diameter. Uses are spark plug wires, battery wires, electrical...

Spark Plug Boots 90Deg, 3D, 1/25

A package of ten, 90-degree, 3D-printed, spark plug boots, ideally suited for the distributor cap (see photo). Enough for eight spark plugs boots at the distributor, plus two boots for the coil wire.  You will need another set of boots for the...

Spark Plug Boots 45Deg, 3D, 1/25

A package of ten, 45-degree, 3D-printed, spark plug boots.   When cutting the boot from the tree, a stem remains to insert into the head's spark plug hole (use a #70 drill bit).   The hollow end accepts Pro Tech's Spark Plug Wire. Pro...

Aluminum Distributor Body 1/25

This is the same Pro Tech distributor body used in their pre-wired distributors. This is the body without the spark plug wires.  You may have your own wires you want to use. A hole is provided in the top.   Contains 1 machined aluminum...

Spark Plug Wire Loom Set 1/25

A nice set of photo etched wire looms. Spreaders are in 2, 3 and 4-hole configurations. If using soft .020" (or smaller) rubber wires, use the looms as they are. If using solid wire, It is necessary to "clean up" the holes with a .020" bit so wires will...

Battery Detail Set 1/24-1/25

A photo etched plate with battery terminals, hold downs and straps. Enough for several cars.   One photo etched set by Detail Master, 1/24-1/25 scales.

Aluminum Ignition Coil 1/25

Machined aluminum ignition coil with rubber boot.Use with your color choice of Pro Tech Spark Plug Cable. Coil shown with Pro Tech's distributor kit, flex fan, spark plug wires, spark plug boots, oil breathers and Demon carburetors. By Pro Tech.

Distributor Kit 1/25

Machined aluminum 1-piece distributor body and shaft with resin cap and boot material. The cap has 'starter' holes to drill out to insert your spark plug wires. Refer to the photo showing a completed distributor. Assembly and painting are not included...

MSD 7 Ignition Box 1/25

Each package contains 1 MSD 7 ignition box. See 'Detailing Wire' to enhance this item, by Pro Tech.Resin, by Pro Tech, 1/25 scale.

MSD 6 Ignition Box 1/25

Each package contains 1 MSD 6 ignition box. The casting of this box shows the ribs and area for the MSD logo. The photo shows two MSD boxes with MSD labels copied from an automotive magazine and reduced. These are not included with the MSD 6...

Mallory/MSD Ignition Coil 1/25

Modeled after a Mallory Ignition Coil.  Also looks very similar to a MSD Ignition Coil.Photo of completed coil is for reference only. Paint, wires and decals are not included.   Each package contains 1 coil, by Pro Tech...

Detailing Wire .007"

Very small wire to be used for ignition wiring, computer connections, gauges, etc.Available in the following colors:BlackRedBlueYellowOne package of wire .007" x 3', by Pro Tech.

Large Detailing Wire

Large gauge detailing wire for ignition items, batteries and other items that have large electrical loads. Available in Black, Red, Blue and Yellow. One package contains 3' x .018" diameter wire. Specify color.

Battery (pair) 1/25

A pair resin batteries to add detail for the trunk or the engine bay. Dress them up with manufacturer's decals found here and battery connectors here.   For multiple battery connections in Parallel or Series, look here.     Contains 2...

Spark Plug or Large Detailing Wire 1/25

Choose a color for your spark plug wires.This can also be used for large detailing wire, if the other Pro Tech wire choices aren't large enough.Available colors:BlackRedBlueYellowOrangeGrayOne length of wire .018" x 3', by Pro Tech.Specify color.

Spark Plug Boots Black 1/25

Rubber boots ready to use as is, for straight boots, or cut them and glue at a 90 degree angle for angled boots.Use in combination with your choice of color Pro Tech Spark Plug Wire.Each pack contains 8 black boots, by Pro Tech.

Larger Detailing Wire or 1/16 Spark Plug Wire

This black wire can be used for a large gauge electrical wire for 1/25 and 1/16 scales and it's also used for 1/16 scale spark plug wire. This has a solid copper core and will maintain its shape when formed. One package contains 3' of black wire, .024"...

Detailing Wire .0075", Black

Small black wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: WhiteRedLight BlueDark BlueYellowOrange   One package of wire .0075" x 3', by Detail...

Battery Cables with Terminals, Pre-Made 1/25

Every car has battery cables and this will really add detail to your engine bay. Long black and red leads with realistic 3D-printed terminals. Also includes photo etched battery hold-down brackets, one of which is to be folded to 90degrees. Available...

Spark Plug Wire, White .012” 1/24-1/25

A white spark plug wire equal in size to a real world 8mm wire. 7mm, 8mm and 9mm spark plug wires are the most common. Can also be used for larger electrical loads. Bends easily and holds its shape.Also available in the following colors: Light...

Spark Plug Wire, Lt. Blue .012” 1/24-1/25

A light blue spark plug wire equal in size to a real world 8mm wire. 7mm, 8mm and 9mm spark plug wires are the most common. Can also be used for larger electrical loads. Bends easily and holds its shape.Also available in the following...

Spark Plug Wire, Red .012” 1/24-1/25

A red spark plug wire equal in size to a real world 8mm wire. 7mm, 8mm and 9mm spark plug wires are the most common. Can also be used for larger electrical loads. Bends easily and holds its shape.Also available in the following...

Small Detailing Wire, Yellow 1/24-1/25, 1/43

This is labeled a spark plug wire in 1/43 scale, but its really small diameter is excellent small electrical loads. Use this for gauges, shift light, interior wiring, etc. Bends easily and holds its shape. Soon available in other colors. One package...

Spark Plug Wire, Dark Yellow .012” 1/24-1/25

A yellow spark plug wire equal in size to a real world 8mm wire. 7mm, 8mm and 9mm spark plug wires are the most common. Can also be used for larger electrical loads. The actual color is darker than the manufacturer's product photo above. Bends easily...

Ignition or General Wire, Red .014"

This deep red wire can be used for any electrical need. It is .014" diameter which is equal in real life to 5/16" or 9mm at 1/25 scale. At 1/16 scale, this wire would be equal to 1/4" diameter. Uses are spark plug wires, battery wires, electrical...

Ignition or General Wire, Black .014"

This black wire can be used for any electrical need. It is .014" diameter which is equal in real life to 5/16" or 9mm at 1/25 scale. At 1/16 scale, this wire would be equal to 1/4" diameter. Uses are spark plug wires, battery wires, electrical...

MSD Pro Mag 44, 1/25

A 3D-printed MSD Pro Mag. Its one-piece design allows for ignition wire to be threaded through openings below the top cap. Includes a styrene shaft and decals. Replacement decals will be available soon. Check out the FREE downloadable PDF file...

Spark Plug Wire Loom Set, #1 1/24-1/25

This is a traditional set of wire looms. Includes four pairs of different styles, plus the typical wire separators for one to four wires. These have a good shine to them and don't need to be painted.   Hole size for spark plug wires in the 1, 2,...

Detailing Wire .0075", Green

Small dark green wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueDark Blue One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", Orange

Small orange wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueDark Blue One package of wire .0075" x 3', by Detail Master

Ignition Wire, Gray, .022"

Small solid core gray wire for ignition components as well as any wiring needs. Wire diameter is .022"   One roll, 2' long, by Detail Master.

Detailing Wire .0075", Red

Small red wire can be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteLight BlueDark BlueYellow One package of wire .0057" x 3', by Detail Master

Detailing Wire .0075", Light Blue

Small light blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedYellowDark Blue One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", Yellow

Small dark blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueDark Blue One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", Dark Blue

Small dark blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueYellow One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", White

Small white wire can be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackRedLight BlueDark BlueYellow One package of wire .0057" x 3', by Detail Master