Engine Parts

SBC Tunnel Ram & Lenco 1/25

An all new, highly detailed, complete 429cid Ford engine with the Boss 429 cylinder head/valve cover combo. Perfect for that '80s to '90s Pro Stock racer. Included is everything needed to build a well detailed, carbureted engine with a...

MSD Pro Mag 44 Pre-Wired 1/25

Here's a 3D-printed MSD Pro Mag with your color choice of spark plug wire already installed.Drill a hole in your block and insert this MSD magneto. Route the wires to the spark plugs and don't forget the Spark Plug Boots, for even more detail. Specify...

3D-Printed 4bbl Carburetor 1/25

Highly detailed Holley Street/Strip 4-bbl Carburetor.With single or dual carbs, you'll need a Fuel Junction Block (see 1/25 SCALE/ENGINE RELATED/FUEL MANAGEMENT). Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the SMALL or...

Aluminum Distributor Body 1/25

This is the same Pro Tech distributor body used in their pre-wired distributors. This is the body without the spark plug wires.  You may have your own wires you want to use. A hole is provided in the top.   Contains 1 machined aluminum...

Belt Material - Serpentine, V-Belt, Accessory 1/25

This rubber, stretchable belt material can be used for many purposes. The 3" long strip is ribbed lengthwise and can be separated for the width you need.  Simply cut the length desired and glue it at the underside of the crank or other pulley...

BBC Centered Motor Plate 1/25

A more accurate motor plate than found in a kit. It is designed for those cars with a centered driveline.While this motor plate is copied after the one used in the Revell Pro-Sportsman kits, it can be used in any build with possible modification.It is...

Liberty Transmission 1/25

This is a replica of the Liberty 5-speed Clutchless transmission. Scott, at Futurattraction, took measurements directly from a real Liberty transmission. It doesn't get any more authentic than this.   See also, a photo etched Liberty shifter...

HEMI Injector Manifold 1/25

A fuel injector manifold for your HEMI engine.   Here's a fuel plumbing diagram for this manifold.The lines go to a distribution block in the center.      Velocity stacks are available to fit this manifold. File the little 'nubs' on...

Chevy Injector Manifold 1/25

A fuel injector manifold for your Chevy engine.   Here's a fuel plumbing diagrams for this manifold.The lines go to a distribution block in the center.      Velocity stacks are available to fit this manifold. Contains 1 resin piece.

Enderle Hat 1/25

A 3-hole late model Enderle injection hat.Molded in one piece. Contains 1 resin hat, 1/25 scale, by Competition Resins.

Ford Boss 429 & Lenco 1/25

An all new, highly detailed, complete 429cid Ford engine with the Boss 429 cylinder head/valve cover combo. Perfect for that '80s to '90s Pro Stock racer. Included is everything needed to build a well detailed, carbureted engine with a...

3-Hole Carbon Fiber Hat 1/25

A 3-Hole compact Injector Hat.Molded in one piece. Contains 1 resin hat.

Radiator Flex Fan, 15" Dia 1/25

Add another element of detail to your engine bay.A pair of 15" diameter Flex Fans.      Contains 2 photoetched fans per package in 1/25 scale, by Pro Tech.

Aluminum Ignition Coil 1/25

Machined aluminum ignition coil with rubber boot.Use with your color choice of Pro Tech Spark Plug Cable. Coil shown with Pro Tech's distributor kit, flex fan, spark plug wires, spark plug boots, oil breathers and Demon carburetors. By Pro Tech.

Distributor Kit 1/25

Machined aluminum 1-piece distributor body and shaft with resin cap and boot material. The cap has 'starter' holes to drill out to insert your spark plug wires. Refer to the photo showing a completed distributor. Assembly and painting are not included...

MSD 7 Ignition Box 1/25

Each package contains 1 MSD 7 ignition box. See 'Detailing Wire' to enhance this item, by Pro Tech.Resin, by Pro Tech, 1/25 scale.

MSD 6 Ignition Box 1/25

Each package contains 1 MSD 6 ignition box. The casting of this box shows the ribs and area for the MSD logo. The photo shows two MSD boxes with MSD labels copied from an automotive magazine and reduced. These are not included with the MSD 6...

Mallory/MSD Ignition Coil 1/25

Modeled after a Mallory Ignition Coil.  Also looks very similar to a MSD Ignition Coil.Photo of completed coil is for reference only. Paint, wires and decals are not included.   Each package contains 1 coil, by Pro Tech...

4-Hole Carbon Fiber Hat 1/25

A 4-Hole compact Injector Hat.  This is slightly raised and has 4 square butterflies. Molded in one piece. Contains 1 resin hat.

Vertex Magneto, Aluminum, Pre-Wired 1/25

A machined aluminum Vertex magneto for those early racing engines.The color in the item photo does not reflect the actual color.  Select your choice from the color swatches.Choose your color of spark plug wire...

Pre-Wired Distributor 1/25

Here's a machined aluminum distributor body with your color choice of spark plug wire already installed.Drill a hole in your block and insert this distributor. Route the wires to the spark plugs and don't forget the Pro Tech Spark Plug Boots, for even...

Molded Blower Belt with Pulleys 1/25

A more detailed blower belt set than found in kits. The belt shows cogs on the inside and bolt heads are found on the pulleys. Also has the blower pulley, crank pulley and idler pulley molded in..   Blower pulley to Crank pulley center-to-center...

BBC Tall Valve Covers 1/25

A pair of BBC flat top valve covers that are taller than normal. These will help make your engine look bigger, too. Contains 2 resin pieces.

Barry Grant DEMON 4bbl Carburetor 1/25

Detailed Barry Grant 4-bbl Carburetor.With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING).Photo shows a real Demon carb for reference only. Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the...

Holley Dominator Carburetor (Pair) 1/25

A pair of nicely detailed Holly Dominator 4-bbl Carburetors. With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING). Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the SMALL or LARGE 'T' fitting...

HEMI Injector Manifold, 1/25

A fuel injector manifold for your HEMI engine or with modifications, another big block engine. Also includes a front timing cover with what appears to be a front-mounted fuel pump. DIMENSIONS: Length = .75"Width = .50" These injector stacks...

Dry Sump Oil Reservoir, 1/25

This dry sump oil reservoir is modeled after a Moroso 22612. Includes a hole in the bottom for an oil line. Check out this free Dry Sump Oil diagram for proper plumbing.   3D-printed, by Teds Modeling, 1/25 scale.

Timing Cover, Water Pump, T'Stat Housing, 1/25

This combination will detail the front of your SBC or BBC engine. CONTAINS: Blank Timing CoverMechanical Water PumpThermostat Housing 3D-printed Cover, Pump and Housing, by Teds Modeling, 1/25 scale.

Liberty Transmission Shifter Lever Set 1/25

You need a set of these Liberty shifters for your Door Slammer or other drag car.  Adds realism and detail to your build. Contains set of levers, brackets, linkage and instructions..   Photo etched, .015" nickel-silver plate. 1/25 scale.

3D-Printed Demon Carburetor 1/25

Highly detailed Holley Street/Strip 4-bbl Carburetor.The photos of the carb show it on the top of Micro Scale Set bottle. Dimensions: Overall length (float bowl to float bowl) - .540" Carb diameter (for velocity stacks) - .290". The velocity stacks by...

Water Pump, Alternator, Timing Cover, Crank Pulley, 1/25

Here it is, all in one 3D-printed piece for a BBC or SBC. A timing cover with the crank pulley along with a water pump (and pulley), alternator and rubber V-belt. I took the time to design and print a highly detailed combination of everything...

3D-Printed 'Street' 4bbl Carburetor 1/25

Highly detailed Holley Street 4-bbl Carburetor with a choke plate in the closed position.With single or dual carbs, you'll need a Fuel Junction Block (see 1/25 SCALE/ENGINE RELATED/FUEL MANAGEMENT). Also see the Braided Lines, Hard Lines, Soft Lines and...

Lenco Transmission 3-Speed/Reverse, Manual Shift 1/25

This is a complete Lenco transmission configured for 3-speeds with reverse. It is a one-piece unit including 3D-printed shifter levers (the 2 levers are really small and easy to loose). The front section contains gears 1 and 2 and is mandatory...

Lenco Transmission, 3-Speed/Reverse, with Air Shifters 1/25

This is a new and improved Lenco 3-speed transmission which uses a new 3D-printed master. Improvements include: Sharper overall detail More fastener detail Recesses in the top of the cases to fit separate CO2 pods 3D-printed CO2 pods. This...

Lenco Transmission, 4-Speed/Reverse, with Air Shifters 1/25

This is a new and improved Lenco 4-speed transmission which uses a new 3D-printed master. This version is for CO2 shifting and not manual shifting levers.   Improvements include: Sharper overall detail More fastener detail Recesses in the...

Ford Cleveland 351 & Lenco 1/25

An all new, highly detailed complete, 351cid small block Ford engine with Cleveland heads.  Perfect for that '70's to early '80s Pro Stock racer. This engine is designed completely from a real Ford 351.            ...