1/25 - 1/24 Scale

Rat Rod & Misc Graphics Decal Sheet #2, 1/25

1/25 scale mini decal sheet with graphics. Includes (2 of each)  Pinup Girls Skulls "Midnight Auto Salvage" "Deuces High" Big Kahuna on a surfboard "Undertaker Recovery" Bumble Bees and more One mini sheet. by SLIXX Decals, 1/25 scale.

NoS or Fire Aluminum 2-Bottle Set with Upright Holder 1/25

You won't find a more realistic upright nitrous oxide bottle set than this one.  Use one as a fire bottle if you have a plumbed fire suppression system. These 10 lb bottles are made for an upright position... Includes: CNC'd aluminum bottles ...

Dana - Narrowed Rear End & Brake Kit 1/25

Here is a complete Dana narrowed rear end with brakes. Overall with between axle tube ends is 1-7/8" Kit includes: Narrowed housing Rear cover Housing ends including one spare Resin brake hats Resin calipers PE drilled rotors PE...

Drag Racing Parachute 1/25

A drag chute made of resin.Contains 1 chute, by Pro Tech.Resin

Interior Door & Window Crank Set 1/25

A set of 4 each, door and window cranks to add detail to your interior.Contains 8 metal cast pieces per pack, by Pro Tech.

Dry Sump Diagrams and Example Photos

Want to plumb that dry sump oil system properly and realisticly? Here is a free downloadable PDF file with tons of information. Included are a few different plumbing diagrams, depending on how detailed you want to be and on your particular build. You...

Brake Kit - Rear, Drilled Rotor .125" Spindle Diameter 1/25

This is the same rear end brake set as Futurattraction's FA-C-ROT-DR2R-063, except this rotor has a larger .125" ID hole. This allows for the hubs and rotors to slide over Futurattraction's axle housing and gives more gluing surface where they are...

Beadlock Rings, Weld 1/24

A set of 4 Weld Beadlock Rings for your rear wheels. The beadlock rings are die cast and silver in color. The rings are on a protective backing and I didn't want to peel one off, so these measurements might be slightly off but close enough. OD - ...

Wheelie Bar Housing Kit 1/25

Here is a Wheelie bar wheel housing kit designed for today's PM, FC, ADRL, SS, and others. Includes PE wheel housing and PE wheels which must be assembled. 3D-printed wheels are also included along with 2 pieces of telescoping rods and two hex pins...

Larger Detailing Wire or 1/16 Spark Plug Wire

This black wire can be used for a large gauge electrical wire for 1/25 and 1/16 scales and it's also used for 1/16 scale spark plug wire. This has a solid copper core and will maintain its shape when formed. One package contains 3' of black wire, .024"...

Distributor, Black Cap, 90-Degree Boots 1/25

An authentic looking distributor with 90-degree black boots at the cap and straight black boots at the spark plug end. Includes a nicely detailed cap, base and aluminum stem along with pre-assembled spark wires with boots 90-degree black boots are...

Chevy Van with Drag/Ski Boat and Trailer, 1/25

CHEVY VAN:Cragar SS magsWide Goodyear tiresBubble portholes at rear sidesSide-pipe headersChevy 350 engineCustom seats DRAG/SKI BOAT:Kindsvater custom hullFord 427 SOHC engineEngine Blower or Tri-Carb option2 different sets of exhaust options2 different...

Nut & Bolt Set - Photo Etched

Photo Etched bolt and nut flat heads,  Nut features a protruding bolt. Offered in 3 sizes to fit your needs. The dimension is measured across the flats.Mounted on a soft back so no cutting of parts is necessary (means less lost...

Mark Martin #6 Valvoline Taurus SnapTite NASCAR, 1/24

Pre-painted 1/24 scale Taurus body of Mark Martin's #6 Valvoline NASCAR in a SnapTite version. Complete with: Good Year rubber tires and wheels Detailed chassis Clear styrene window 'glass' Interior detailing By Revell, 1/24 scale.

Rack & Pinion Set 1/25

 A complete Rack & Pinion set for your chassis. This fits a chassis that is about 1” wide (outside dimension). Consists of: 3D printed steering rack (0.80" overall length)Two rubber bootsStainless steel tubing.(3" x .022" OD)Photo...

M&H Racemaster 'Pie Crust' Slicks 1/25

M&H Racemaster 'Pie Crust' Drag Slicks, black wall. Raised 'M&H Racemaster' lettering on one sidewall. Letters are slightly raised.Fairly soft rubber cast tires. Tire Measurements: Diameter = 1.18"Overall Width = .46"Tread Width = .37Wheel...

Detailing Wire .0075", Black

Small black wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: WhiteRedLight BlueDark BlueYellowOrange   One package of wire .0075" x 3', by Detail...

Large Tapered Pro Stock Wing 1/25

This wing is fairly large and is straighter along the rear edge than along the front edge. End plates are tapered toward the rear and extend down from the top edge. Measurements: Overall length: 2.15" (at the widest, front, edge) Width at end plates: 1...

66 Pro Street Nova 1/25

FEATURES Molded in blue and clearChrome and black vinyl tiresTubbed chassisWide slicksHi--rise manifoldHood scoopDecalsIllustrated instructions Includes displayable engine stand and engine block New in unwrapped box. AUTOMATICALLY...

Battery Cables with Terminals, Pre-Made 1/25

Every car has battery cables and this will really add detail to your engine bay. Long black and red leads with realistic 3D-printed terminals. Also includes photo etched battery hold-down brackets, one of which is to be folded to 90degrees. Available...

67 Chevelle Pro Street 1/25

1967 Chevy Chevelle Pro Street This kit features interior with textured seats, molded gas tank, full suspension and shocks, detailed engine, detailed steering wheel and dashboard, and accurate body details. The rear tire choice is my favorite. ...

Challenger '08 - '10 Hood 1/25

A 2008-2010 Challenger hood in the 70's Shaker Hood style.   Contains 1 resin hood, 1/25 scale

Blower Restraint Straps & Harness/Seat Belt Material 1/25

A material that has multiple uses. Use this material for blower restraint straps or seat belts and racing harness belts.  It has the satin fabric texture needed for realism. The harness buckle set shown for reference only in the above photo is Pro...

Barry Grant DEMON 4bbl Carburetor 1/25

Detailed Barry Grant 4-bbl Carburetor.With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING).Photo shows a real Demon carb for reference only. Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the...

Filler / Gas Cap (Hinged Style) 1/25

Here's a pair of gas, oil or other filler caps for your cars. This is the type that has a hinge on one side. Diameter = .17", 11/64" Cast in one piece. Contains 2 metal cast pieces, by Pro Tech 1/25 scale.

Pro Mag 44, Ignition & Electrical Diagrams

Nothing brings a drag racing model engine to its realism potential more than wiring. You will glance over an empty engine, but you will do a double-take when it is detailed with wiring and plumbed with fuel and injection lines. Here is a FREE...

Engine, Under the Hood, Interior Decal Sheet, 1/25

This decal sheet has something for every muscle car, sports car, stocker and more . I included a few close up views of some of the included decals for reference.   Here is just a sampling of what's included. Air filter, valve cover and logo...

Holley Dominator Carburetor (Pair) 1/25

A pair of nicely detailed Holly Dominator 4-bbl Carburetors. With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING). Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the SMALL or LARGE 'T' fitting...

Steering Wheel 1/25

Sport Steering Wheel kit. The wheel grip is mastered in 3D and will be sold as either 3D printed or resin, depending on availability. Three-spoke wheel center is photo etched and replicates Grant Performance #673.   Photo of real Grant 673 steering...

Cragar 15" SuperTrick Wheels 4-Set, Hub 1/24

A highly detailed set of front and rear Cragar Super Trick wheelsThese Cragar's replicate 15" wheels used on 1970s-80s era drag cars.  Crowned centers are present on both front and rear wheels, with double-drilled pattern on rear wheels. Inner and...

Wheelie Bar Single X Frame, 1/25

Lower Wheelie Bar Frame - Single X Design. This is the frame only and does not include the Wheelie Bar Housing Kit or mounting/structural means. Building wheelie bars in 1/25th scale is challenging.  It can be difficult to get longitudinal tubing...

CL's 19" Wheels & Tires 4-Set 1/24

A set of four chrome wheels with low profile tires. Sidewall and tread width is .45" (29/64") Like the wheels but don't want low profile tires?  Take these tires off and replace with other tires. All four wheels/tires are the same size (not big and...

Fuel Line (solid core) 1/25

This line can be used for fuel, oil, water or other transfer hoses.It has a solid copper core to hold its shape.Use hex fittings sized at .025".Each package contains one coil .024" x 3', color black, by Pro Tech.

Soft Red Line - Hose .039, 1mm OD

This is a soft, stretchable red line that bends easily and smoothly.  It's able to bend at a sharp angle without kinking. It is bright red and made of Polyester.See .040" Hex Fittings or Size C (or Size D for more space) Ferrules for hose ends.This...

Volkswagen Contingency Decals, 1/25

These decals cannot be found anywhere else. Puts these on a grocery-getter VW or a super rally car. All logos are in pairs. Hella Bosch (2 styles) EMPI Engle Bugpack MOFOCO Mooneyes Chirco Sacs JayCee Treuhaft and more   One 2...

Drag Racing NHRA Contingency Decals, 1/25

You'll find "under the hood" manufacturer logos for valve covers, ignition and oil filters. Use these as sponsor decals on the sides of your car too. NHRA K&N Edelbrock Hooker NGK Goodyear Mooneyes Moroso Union...