Competition Resins 1/25 Scale

1965 Mustang Tear Drop Hood - AMT 1/25

A tear drop bubble that can be cut out and mounted on your hood or it's made to fit the AMT stock '65 Mustang kit.   Here's an example of the hood on a 'Russ Davis Ford' Mustang.          Contains 1 resin...

68 Dana Camaro Hood 1/25

A split double intake hood to replicate the 1968 Dana Camaro. Here's an example of the hood on a Dana Camaro.           Contains 1 resin hood, 1/25 scale

60s 5-Spoke Rear Drag Wheels 1/25

A pair of 5-spoke deep rear wheels. Popular on gassers, super stock or pro stock cars as well as mean street machines.   One pair of resin wheels by Competition Resins, 1/25 scale.

Weld Pro Star 4-Wheel Set 1/25

A set of four Weld Pro Star Racing Wheels - front and rear. Photo shows centers as one solid piece but the '5-spokes' cut out. Includes deep rear wheels and front wheels showing lug nuts.   Contains 2 pairs resin wheels, 1/25 scale.

Gasser Slotted Front Wheels 1/25

A pair of 5-slot front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Fenton Front Wheels, but these have slightly smaller slots    One pair of resin wheels by Competition Resins, 1/25 scale.

Pro Stock/Pro Mod Wing 1/25

This wing has a small arch as viewed from the toop. Has teardrop end plates. Measurements: Overall length: 2.15" Width at end plates: .52" Contains 1 resin piece, 1/25 scale

Bear Claw' Rear Wheels 1/25

A pair of deep rear wheels. Similar to an ET III style wheel.    Contains 2 resin wheels 1/25 scale.

Wide Rear Steel Wheel Pair 1/25

A pair of deep rear wheels. These are stock looking steel wheels with lug nuts, except they're wide to hold big rubber. Great for street racers, early Super Stock or Pro Stock and Rat Rods. Width/Depth = .33" (11/32")   Contains 2 resin wheels by...

MiniLite Road Racing Wheel Set 1/25

A set of four road MiniiLite Racing Wheels. Unlike the racing set of MiniLite wheels, these are all the same size.   Contains 4 resin wheels by Competition Resins, 1/25 scale.

Dual Quad Tunnel Ram Manifold 1/25

Set a pair of Dominator or Demon carbs on top of this manifold. Make sure you have room under your hood or cut a hole in the hood to allow for the height. Overall height is .43" (7/16"). Here's a photo of a real dual quad setup byRich Vitiritti. ...

Drag Slicks Pro Stock 1/25

Pro Stock Drag Slicks.  Although the package is titled 70's style slicks, they will obviously work for many drag racing types. The slicks are a lower profile and smaller in general than other slicks I carry. These are fairly hard tires and extra...

Ford C6 Transmission 1/25

A Ford C6 automatic transmission. Contains 1 resin transmission, 1/25 scale

12-Spoke Front Wheels 1/25

12-Spoke front drag racing wheels. 4 resin pieces makes 2 wheels, 1/25 scale, by Competition Resins.

Shotgun Blower Hat 1/25

A 2-Hole 'Shotgun' Injector Hat.Molded in one piece. Contains 1 resin hat.

HEMI Injector Manifold 1/25

A fuel injector manifold for your HEMI engine.   Here's a fuel plumbing diagram for this manifold.The lines go to a distribution block in the center.      Velocity stacks are available to fit this manifold. File the little 'nubs' on...

Chevy Injector Manifold 1/25

A fuel injector manifold for your Chevy engine.   Here's a fuel plumbing diagrams for this manifold.The lines go to a distribution block in the center.      Velocity stacks are available to fit this manifold. Contains 1 resin piece.

Enderle Hat 1/25

A 3-hole late model Enderle injection hat.Molded in one piece. Contains 1 resin hat, 1/25 scale, by Competition Resins.

GM T400 Transmission 1/25

A General Motors Turbo 400 automatic transmission. Contains 1 resin transmission, 1/25 scale

Centerline Drag Star Wheels, Resin 1/25

A set of four Centerline Drag Star Racing Wheels - front and rear. Wheel details are sharp and crisp. Rear wheel is .70" OD.  Overall width is .35".Front wheel is .66" OD. Consists of 4 total pieces and does not include rear (or backing) rings...

Pro Mod - Pro Stock D Shaped Opening Hood Scoop 1/25

A raised hood scoop for that PM or PS racer with a 'D' shaped mouth opening. See also similar hood scoops with a Round Opening or Square Mouth Opening.Molded in one piece. Contains 1 resin scoop, 1/25 scale.

Pro Mod - Pro Stock Square Opening Hood Scoop 1/25

A raised hood scoop for that PM or PS racer with a square mouth opening. See also similar hood scoops with a Round Opening or 'D-Shaped Opening. Molded in one piece. Contains 1 resin scoop, 1/25 scale.

Halibrand Front Wheels 1/25

A pair of slotted Halibrand front wheels.     Contains 2 resin wheels 1/25 scale.

MOON 392 HEMI Valve Covers 1/25

A pair of ribbed Moon 392 HEMI valve covers with spark plug holes already drilled. Contains 2 resin pieces.

3-Hole Carbon Fiber Hat 1/25

A 3-Hole compact Injector Hat.Molded in one piece. Contains 1 resin hat.

4-Hole Carbon Fiber Hat 1/25

A 4-Hole compact Injector Hat.  This is slightly raised and has 4 square butterflies. Molded in one piece. Contains 1 resin hat.

Battery (pair) 1/25

A pair resin batteries to add detail for the trunk or the engine bay. Dress them up with manufacturer's decals found here and battery connectors here.   For multiple battery connections in Parallel or Series, look here.     Contains 2...

Wrinkle Wall Drag Slicks, 1/25

Current style Drag Slicks with a wrinkled sidewall.  Dimensions are listed below to see if they fit your needs. Each side of these tires will accept a different size wheel. Tire Measurements: Width .60",  15.25mmWheel opening .660", 16...

Molded Blower Belt with Pulleys 1/25

A more detailed blower belt set than found in kits. The belt shows cogs on the inside and bolt heads are found on the pulleys. Also has the blower pulley, crank pulley and idler pulley molded in..   Blower pulley to Crank pulley center-to-center...

Aero II Pro Stock Hood Scoop, 1/25

A Rectangular Opening Pro Stock Hood Scoop. It's designed to rest against the windshield and may have to be adjusted to fit your windshield angle. See also a longer version of this hood scoop here. Molded in one piece. Contains 1 resin scoop, 1/25...

BBC Tall Valve Covers 1/25

A pair of BBC flat top valve covers that are taller than normal. These will help make your engine look bigger, too. Contains 2 resin pieces.

Drag Slicks TF or FC 1/25

Wide Drag Slicks for a Funny Car or Top Fuel rail. These are fairly hard tires and extra sanding is required for the treads and inner tire, if necessary to fit your wheels. Measurements are as follows:Diameter = 1.40"Overall width = .89"Tread width = ...

M&H Racemaster 'Pie Crust' Slicks 1/25

M&H Racemaster 'Pie Crust' Drag Slicks, black wall. Raised 'M&H Racemaster' lettering on one sidewall. Letters are slightly raised.Fairly soft rubber cast tires. Tire Measurements: Diameter = 1.18"Overall Width = .46"Tread Width = .37Wheel...

Large Tapered Pro Stock Wing 1/25

This wing is fairly large and is straighter along the rear edge than along the front edge. End plates are tapered toward the rear and extend down from the top edge. Measurements: Overall length: 2.15" (at the widest, front, edge) Width at end plates: 1...

Challenger '08 - '10 Hood 1/25

A 2008-2010 Challenger hood in the 70's Shaker Hood style.   Contains 1 resin hood, 1/25 scale

Holley Dominator Carburetor (Pair) 1/25

A pair of nicely detailed Holly Dominator 4-bbl Carburetors. With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING). Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the SMALL or LARGE 'T' fitting...

Pro Stock Late Model Seat, 1/24

Here is a one-piece ‘shell’ type seat. Has molded-in padding, harness and buckles. Measurements: Width at Top (widest point) - 0.82” Height - 1.15” Depth - 0.50” One resin seat, by Comp Resins, 1/24 scale.