Shop by Manufacturer

Injector Butterfly Set for Competition Resins Shotgun Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resins 2-Hole Shotgun injector hat (part #148).  Click here to see the 1/16 injector hat...

Injector Butterfly Set for Competition Resins Enderle Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resins Enderle injector hat (part #035).  Click here to see the 1/16 injector hat...

4-Link Pro Mod Suspension Kit (also fits Dana) 1/25

This kit represents the current heavy duty style of 4-link kits found on high horsepower Pro Mod drag cars. Also included in this kit is anti-roll bar linkage and arms. No torsion bar/tube is included and must be scratch built. Included are four .050"...

Lenco Shifter Lever Set 1/25

You need a set of these Lenco shifters for your Pro Mod or other drag car.  Adds realism and detail to your build. Contains set of levers, brackets, linkage and instructions.. Make sure you click on the product photo above, to enlarge it, to...

Pedal Set for FC, PM or Door Slammer 1/25

You need a set of these pedels to complete that racing interior and sdd realism and detail to your build. Enough for two cars or more, depending on how many pedals you need.                Contains TWO...

Hand Brake-Parachute Lever Set 1/25

A pair of levers for a Hand Brake to add detail to your cockpit. Enough for two builds. Contains two levers and hand grips plus 2-sizes of additional small levers for a parachute release or other. Photo etched, 1/25 scale.

Dragster Accelerator Pedal Set 1/16

These dragster pedals replicate modern tubular constructed accelerator pedals. They incorporate a safety return loop on both the top and side. Choose whichever one you wish and remove the other. Photo etched, 1/16 scale.

Pedal Set for FC, PM or Door Slammer 1/16

You need a set of these pedels to complete that racing interior and sdd realism and detail to your build.   Contains one each: Accelerator pedal Brake pedal Clutch pedal Pedal foot pads Make sure you click on the photo, to enlarge...

Lenco Shifter Lever Set 1/16

You need a set of these Lenco shifters for your Pro Mod or other drag car.  Adds realism and detail to your build. Contains set of levers and will work with the TDR or Flash Point Lenco transmissions. Make sure you click on the photo, to enlarge...

Hand Brake Levers for for PM or TF 1/16

A set of Hand Brake Levers for your Dragster or Funny Car.  Adds realism and detail to your build. Contains two brake levers with additional hand grips. Place a small piece of styrene between the lever grip and added grip for thickness. Photo...

Small Block Engine Crank Trigger 1/16

Here is a Crank Trigger kit, for a small block engine and especially for the small block Chevy. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a...

Big Block Engine Crank Trigger 1/16

Here is a Crank Trigger kit, for the a block engine and especially for the big block Chevy. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a distributor...

Oval Fender Exhaust Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the bezels used on modern Pro Mod and other cars where the exhaust exits the fender well, just behind the front wheel. These are oval, but round bezels are also available for a straight exhaust exit. Photo Etched,...

Round Fender Exhaust Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the bezels used on modern Pro Mod and other cars where the exhaust exits the fender well, just behind the front wheel. The inside diameter is .25". These are round, but oval bezels are also available for an angled...

Round Window Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the window bezels used on modern Pro Mod and other cars for ventilation and pressure equalization. Photo Etched, (2 pr) 

23" Holli's (Halibrand) Wheels & Tires (2 pair) 1/24-1/25

A set of four 23", deep dish, chrome Pegasus wheels with low profile tires. Sidewall and tread width is .45" (29/64") Like the wheels but don't want low profile tires?  Take these tires off and replace with other tires. By Pegasus, 1/24 scale...

1471 Kobelco Blower 1/25

A 1471 Kobelco Blower in one-piece resin.The detail is quite good and the bolts are sharp. This is a standalone blower - pulleys or other components are not included. Check out this photo for an idea of which blower you need. Contains 1 resin blower.

Arden Heads with Valve Covers 1/25

For that Flathead engine - a pair of Arden heads with valve covers. The spark plug holes can be easily drilled. You can't tell by the photo, but ARDEN is spelled across the face. Contains 2 resin pieces.

Pro Stock Late Model Valve Covers 1/25

A pair of Pro Stock valve covers with a flat face. Contains 2 resin pieces.

Milodon Valve Covers 1/25

A pair of really nice Milodon valve covers with spark plug holes already drilled. These valve covers have horizontal grooves running lengthwise. They fit on a BBC engine. Contains 2 resin pieces.

Dual Plug HEMI Valve Covers 1/25

A pair of HEMI valve covers with dual spark plug holes already drilled. Contains 2 resin pieces.

Street Rod Gauges Set #1, Black 1/25

Enough photoetched trims and BLACK gauge faces for four cars. This will add detail to your interior.These gauges are popular in '30 - '34 Street Rods and Roadsters with flat dash boards. They are typically mounted in the center of the dash or over...

Small Detailing Wire

Small gauge detailing wire for ignition items, lights, gauges and other smaller electrical loads. Available in Black, Blue and Yellow. One package contains 3' x .007" diameter wire. Specify color.

Soft Line - Hose .157", 4mm OD & Roll Bar Padding in 1/16

This is a large, soft, rubber tubing (hollow) that is easily configured to the space you have. It's able to bend at a sharp angle without kinking or folding.I do not have Hex Fittings for this soft line. This soft line equals the following equivalent 1:1...

Brake or Fuel Line .014, .35mm Dia

Use this for 1/25 scale brake lines and injector lines.           This aluminum hard line equals the following equivalent 1:1 size at each scale.1/25 scale = 5/16"1/16 scale = 3/16"1/12 scale = N/A1/8 scale  =  N/AUse...

Brake or Fuel Line .016", .4mm Dia

  This hard line equals the following equivalent 1:1 size at each scale. 1/25 scale = 3/8"1/16 scale = 1/4"1/12 scale = 3/16"1/8 scale  =  1/8" Depending on your scale, typical uses are injector lines from distribution blocks into a...

Fuel or Brake Hard Line .020, .52mm Dia

This solid aluminum line is soft to bend and will not kink, even at tight angles. It straightens out easily and will conform to any shape you want.This aluminum 'hard' line equals the following equivalent 1:1 size at each scale.1/25 scale = 1/2"1/16...

Aluminum Hard Line .035, .88mm Dia

This aluminum hard line equals the following equivalent 1:1 size at each scale.1/25 scale = 1 1/4"1/16 scale = 3/4"1/12 scale = 7/16"1/8 scale   = 3/8"Depending on your scale, typical uses are fuel and oil lines. Fuel lines from the fuel pump to the...

Aluminum Hard Line .049, 1.25mm Dia

This aluminum hard line equals the following equivalent 1:1 size at each scale.1/25 scale = 1 1/4"1/16 scale = 3/4"1/12 scale = 7/16"1/8 scale   = 3/8"Depending on your scale, typical uses are fuel and oil lines. Fuel lines from the fuel pump to the...

Aluminum Hard Line .059, 1.5mm Dia

This aluminum hard line equals the following equivalent 1:1 size at each scale. 1/25 scale = 1 1/2"1/16 scale = 15/16"1/12 scale = 3/4"1/8 scale  =  1/2"Depending on your scale, typical uses are coolant, fuel and oil lines.  Also, at...

Aluminum Hard Line .078", 2mm Dia

This aluminum hard line equals the following equivalent 1:1 size at each scale.1/25 scale = 2"1/16 scale = 1 1/4"1/12 scale = 1"1/8 scale  = 5/8"Depending on your scale, typical uses are larger coolant (radiator) and fuel lines, like from the...

Aluminum Line .101, 2.58mm Dia

This soft aluminum line equals the following equivalent 1:1 size at each scale.1/25 scale = 2 1/2"1/16 scale = 1 5/8"1/12 scale = 1 1/4"1/8 scale  = 7/8"Depending on your scale, typical uses are larger coolant (radiator) and fuel lines, like...

Dirt Suspension Mount Kit, Brass 1/16

There are enough parts included for two cars. Kit includes:2 Rear 4-Link Mounts5 Rear Shock Mounts3 Upper Front Shock Mounts2 6th Coil Mounts4 Lower front shock Mounts4 Lift Bar linkage Mounts8 Shifter Linkage Mounts The photo below is a work-in-progress...

Aluminum Hard Line Assortment Sample Package

Here's a great way to try out seven different sizes of my aluminum hard lines. These are soft aluminum and easy to work with. They bend and hold their shape. They can be polished to a bright finish and there's nothing better than real metal. More...

Autometer Gauge Faces - Tachs, Speedos, Boost, Nitrous & More 1/8

All the dial and digital gauges you'll need printed on one sheet.  They're all scaled down to their 1:1 equivalent sizes. They are photo-processed and printed digitally on photo paper.  Not from a copy machine or laser printer.This is NOT...

Auto Meter Gauge Faces - Tachs, Speedos, Boost, Nitrous & More 1/12

All the dial and digital gauges you'll need printed on one sheet.  They're all scaled down to their 1:1 equivalent sizes. They are photo-processed and printed digitally on photo paper.  Not from a copy machine or laser printer.This is NOT...