Shop by Manufacturer

Dragster or Fuel Altered Front Tires 1/16

Skinny front tires for wire or spoked wheels, as found on dragsters and altered. Measurements: 1" OD 0.7" ID These tires fit the Comp Resins 12-spoke wheels found here. Contains 1 pair rubber-like tires.

Halibrand Front Wheels 1/25

A pair of slotted Halibrand front wheels.     Contains 2 resin wheels 1/25 scale.

MOON 392 HEMI Valve Covers 1/25

A pair of ribbed Moon 392 HEMI valve covers with spark plug holes already drilled. Contains 2 resin pieces.

Pro Mod / Funny Car / Pro Stock Rear Wing 1/25

Includes main horizontal wing, sides and support rods. This wing can be made to fit many different race classes.   Here are some examples of what can be done.     Resin, 1/25 scale

Dual Nitrous , O2, Fire or Air Bottle Pair 1/25

Here are a pair of bottles that can be used for nitrous, fire, compressed air, oxygen, etc. Mount them in the interior, at the rear or ahead of the engine. Add a NOS decal found here, if this is the intended use for these bottles.  The 'small' size...

Cragar Super Trick 8-hole Rear Wheels 1/16

Cragar Super Trick, 8-hole rear drag racing wheels. Fits Revell tires...

5-Slot Rear Wheels 1/16

A 2-piece, 5-slot rear racing wheel. Fits Revell tires. Contains 4 resin pieces/2 wheels.

Pro Stock / Super Stock Drag Slicks 1/25

Drag Slicks for your Pro Stock, Super Stock or other race car.  Dimensions are listed below to see if they fit your needs. Each side of these tires will accept a different size wheel.                 ...

Lenco Transmission 4-Speed/Reverse, Manual Shift 1/25

This is a complete Lenco transmission configured for 4-speeds with reverse. It is a one-piece unit including 3D-printed shifter levers (the shifter levers are really small and easy to loose). The front section contains gears 1 and 2 and is...

Door Lever Set - Doorslammer or Street Machine 1/16

Door car levers to detail that race car or street machine interior.  These levers can be used in any type of build. They can be used for interior or exterior handles as well as parachute or other release leavers. Photo etched .010...

Injector Butterfly Set for Flash Point FC Engine 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Flash Point injector hat that comes with their 526 FC engine.  Click here to see the 1/16 FC engine...

Injector Butterfly Set for Competition Resins Shotgun Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resins 2-Hole Shotgun injector hat (part #148).  Click here to see the 1/16 injector hat...

Injector Butterfly Set for Competition Resins Enderle Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resins Enderle injector hat (part #035).  Click here to see the 1/16 injector hat...

Coil Over Shock Kit 1/25

Here is a complete, realistic appearing, coil over shock kit, with all of the parts needed to detail your suspension. Kit includes:    3D-printed 2-piece shock bodies Resin lower extensions RB Motion rod ends Nickel-silver...

Front Strut Suspension Kit with Drilled Rotors 1/25

Here is a complete front strut kit, with all of the parts needed for a detailed front suspension. This is a static suspension and not functional. This set is for 5-bolt hub mounted wheels. Kit includes (28 pieces): 3D-printed strut bodies/spindles...

4-Link Pro Mod Suspension Kit (also fits Dana) 1/25

This kit represents the current heavy duty style of 4-link kits found on high horsepower Pro Mod drag cars. Also included in this kit is anti-roll bar linkage and arms. No torsion bar/tube is included and must be scratch built. Included are four .050"...

Wheelie Bar Housing Kit 1/25

Here is a Wheelie bar wheel housing kit designed for today's PM, FC, ADRL, SS, and others. Includes PE wheel housing and PE wheels which must be assembled. 3D-printed wheels are also included along with 2 pieces of telescoping rods and two hex pins...

Lenco Shifter Lever Set 1/25

You need a set of these Lenco shifters for your Pro Mod or other drag car.  Adds realism and detail to your build. Contains set of levers, brackets, linkage and instructions.. Make sure you click on the product photo above, to enlarge it, to...

Small Block Engine Crank Trigger 1/25

Here is a Crank Trigger kit, for a small block engine and especially for the small block Chevy. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a...

Big Block Engine, Crank Trigger 1/25

Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a distributor triggered system. A crank triggered system can often make more power and produce more...

Cockpit Detail Set, Funny Car, Top Fuel 1/16

This cockpit detail set will finish off your Funny Car or Top Fuel racer. Enough for two cars. Set includes (2 each): Butterfly steering wheel    Handle grips (4 per wheel) Dragster-type accelerator pedal Hand brake lever  ...

Pedal Set for FC, PM or Door Slammer 1/25

You need a set of these pedels to complete that racing interior and sdd realism and detail to your build. Enough for two cars or more, depending on how many pedals you need.                Contains TWO...

Hand Brake-Parachute Lever Set 1/25

A pair of levers for a Hand Brake to add detail to your cockpit. Enough for two builds. Contains two levers and hand grips plus 2-sizes of additional small levers for a parachute release or other. Photo etched, 1/25 scale.

Dragster Accelerator Pedal Set 1/16

These dragster pedals replicate modern tubular constructed accelerator pedals. They incorporate a safety return loop on both the top and side. Choose whichever one you wish and remove the other. Photo etched, 1/16 scale.

Pedal Set for FC, PM or Door Slammer 1/16

You need a set of these pedels to complete that racing interior and sdd realism and detail to your build.   Contains one each: Accelerator pedal Brake pedal Clutch pedal Pedal foot pads Make sure you click on the photo, to enlarge...

Lenco Shifter Lever Set 1/16

You need a set of these Lenco shifters for your Pro Mod or other drag car.  Adds realism and detail to your build. Contains set of levers and will work with the TDR or Flash Point Lenco transmissions. Make sure you click on the photo, to enlarge...

Hand Brake Levers for for PM or TF 1/16

A set of Hand Brake Levers for your Dragster or Funny Car.  Adds realism and detail to your build. Contains two brake levers with additional hand grips. Place a small piece of styrene between the lever grip and added grip for thickness. Photo...

Small Block Engine Crank Trigger 1/16

Here is a Crank Trigger kit, for a small block engine and especially for the small block Chevy. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a...

Big Block Engine Crank Trigger 1/16

Here is a Crank Trigger kit, for the a block engine and especially for the big block Chevy. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a distributor...

Oval Fender Exhaust Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the bezels used on modern Pro Mod and other cars where the exhaust exits the fender well, just behind the front wheel. These are oval, but round bezels are also available for a straight exhaust exit. Photo Etched,...

Round Fender Exhaust Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the bezels used on modern Pro Mod and other cars where the exhaust exits the fender well, just behind the front wheel. The inside diameter is .25". These are round, but oval bezels are also available for an angled...

Round Window Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the window bezels used on modern Pro Mod and other cars for ventilation and pressure equalization. Photo Etched, (2 pr) 

23" Holli's (Halibrand) Wheels & Tires (2 pair) 1/24-1/25

A set of four 23", deep dish, chrome Pegasus wheels with low profile tires. Sidewall and tread width is .45" (29/64") Like the wheels but don't want low profile tires?  Take these tires off and replace with other tires. By Pegasus, 1/24 scale...

Drag Slicks TF or FC 1/25

Wide Drag Slicks for a Funny Car or Top Fuel rail. These are fairly hard tires and extra sanding is required for the treads and inner tire, if necessary to fit your wheels. Measurements are as follows:Diameter = 1.40"Overall width = .89"Tread width = ...

3-Hole Carbon Fiber Hat 1/25

A 3-Hole compact Injector Hat.Molded in one piece. Contains 1 resin hat.

1471 Kobelco Blower 1/25

A 1471 Kobelco Blower in one-piece resin.The detail is quite good and the bolts are sharp. This is a standalone blower - pulleys or other components are not included. Check out this photo for an idea of which blower you need. Contains 1 resin blower.