Shop by Manufacturer

Round 9" Aluminum Air Cleaner 1/25

This machined aluminum air cleaner measures 9"w x 2"h. It would be typically be found on a single carburetor.Includes photoetched wing nut and simulated filter element. Photo of a 14" air cleaner showing an added fine mesh screen available here,...

Interior Door & Window Crank Set 1/25

A set of 4 each, door and window cranks to add detail to your interior.Contains 8 metal cast pieces per pack, by Pro Tech.

Oil Filters 1/25

Oil filters made of cast metal.This is a standalone filter. If you need a dual remote oil filter, see Pro Tech's product listed elsewhere here. Each package contains 8 metal cast pieces, by Pro Tech.

Fuel Filters, Aluminum, Pair 1/25

Fuel filters made of aluminum. This is the inline type that would normally feed carburetors.Use with Pro Tech's .025" Braided Line or Fuel Line.   Also, check out my YouTube video on making AN fittings with Pro Tech Braided Line and the Fuel...

Supercharger Pulley Set 1/25

Three cast-metal pulleys and blower belt materail   3-pieces cast-metal and blower belt material by Pro Tech.

MSD 7 Ignition Box 1/25

Each package contains 1 MSD 7 ignition box. See 'Detailing Wire' to enhance this item, by Pro Tech.Resin, by Pro Tech, 1/25 scale.

MSD 6 Ignition Box 1/25

Each package contains 1 MSD 6 ignition box. The casting of this box shows the ribs and area for the MSD logo. The photo shows two MSD boxes with MSD labels copied from an automotive magazine and reduced. These are not included with the MSD 6...

Mallory/MSD Ignition Coil 1/25

Modeled after a Mallory Ignition Coil.  Also looks very similar to a MSD Ignition Coil.Photo of completed coil is for reference only. Paint, wires and decals are not included.   Each package contains 1 coil, by Pro Tech...

Cirello Magneto Kit 1/25

This 3-piece Cirello mag is what you need for that early dragster or altered. The cap has 'starter' holes to drill out for your spark plug wires. Add your color choice of Pro Tech Spark Plug Wire (purchased separately).   Spark plug wire is not...

Holley Dominator 4bbl Carburetor 1/25

Detailed Holly Dominator 4-bbl Carburetor. With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING). Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the SMALL or LARGE 'T' fitting. One per package...

Spark Plug Wire Looms, Photoetched 1/25

These wire looms will keep your spark plug wires separated. This will give you an organized look and it makes it easier to form your wires where you want them.  Used on all drag cars or street vehicles.There are enough wire looms here for many cars...

Valve Cover Wing-Bolts, Photoetched 1/25

Add realism to your engine bay with these Valve Cover Wing-Bolts. They're long valve cover bolts used for decoration.There are enough valve cover bolts here for a few cars.One set photoetched, by Pro Tech.

Valve Cover T-Bolts, Photoetched 1/25

Add realism to your engine bay with these Valve Cover T-Bolts. They're long valve cover bolts that have a T shape at the top.There are enough valve cover bolts here for a few cars. One set photoetched, by Pro Tech.

Dzus Fasteners 1/25

These quarter-turn Dzus fasteners are used primarily to hold down body sections.They're individually mounted on a soft rubber backing, so no cutting is required (and no lost parts).There are enough fasteners here for a couple of cars.One set metal-cast,...

5-Point Racing Harness 1/25

Pro Tech's 5-Point Racing Harness with photoetched buckles and ready to use harness material.                               Pro Tech's own design makes it easy to assemble,...

License Plate Frame Set 1/43

Photoetched scale state license plate frames for added realism. NOTE THIS IS 1/43 SCALE ONLY Also, see the state license plates and performance license plates. One set of 8 photoetched license plate frames, by Pro Tech.

License Plate Frame Set 1/25

Photoetched scale state license plate frames for added realism.   Also, see the state license plates and performance license plates.   One set of 8 photoetched license plate frames, by Pro Tech.

Fuel Line (solid core) 1/25

This line can be used for fuel, oil, water or other transfer hoses.It has a solid copper core to hold its shape.Use hex fittings sized at .025".Each package contains one coil .024" x 3', color black, by Pro Tech.

Pre-Wired Distributor 1/25

Here's a machined aluminum distributor body with your color choice of spark plug wire already installed.Drill a hole in your block and insert this distributor. Route the wires to the spark plugs and don't forget the Pro Tech Spark Plug Boots, for even...

Performance License Plate Set 1/25

Performance license plates for added realism.   Plates included are:   Chevrolet USA-1 Chrysler Dodge Ford Motorsports Ford Lincoln Mercury Mercury Mopar Mustang Plymouth Today's Chevrolet   Also, see the other state license plates along...

State License Plate Set 1/25

State license plates for added realism.   Plates included are: ArizonaCanadaColoradoFloridaIllinoisMichiganMarylandNew JerseyNew YorkTennessee Also, see the license plate frames.   One set of 16 plates printed on paper, by Pro Tech.

Parachute Kit 1/25

This is the ultimate in a 1/25 scale drag chute - Contains an inner resin parachute core with an outer textured material to simulate the actual parachute jacket material.  Don't rely on flat black paint anymore. Color the material any color you want...

Hood Pin Set 1/25

One-piece (pin and plate) hood pins that are photoetched. Contains 12 photoetched hood pins per pack, by Pro Tech.

Detailing Wire .007"

Very small wire to be used for ignition wiring, computer connections, gauges, etc.Available in the following colors:BlackRedBlueYellowOne package of wire .007" x 3', by Pro Tech.

Spark Plug Boots Black 1/25

Rubber boots ready to use as is, for straight boots, or cut them and glue at a 90 degree angle for angled boots.Use in combination with your choice of color Pro Tech Spark Plug Wire.Each pack contains 8 black boots, by Pro Tech.

Radiator or Heater Hose, .070" OD

This solid core wire is used as a 1-3/4" radiator hose or other larger transfer hose at 1/25 scale.  At 1/16 scale it equals a 1" diameter hose, which is closer to a heater hose. It has an outside diameter of .070" It will hold its shape when...

Heater Hose 1/25

This copper core wire is used as a small heater hose or other transfer hose. The copper core will hold its shape when formed into place.  Cut the outer skin back, at the ends, just enough to leave a stub to insert into a drilled hole.Use hex...

Spark Plug or Large Detailing Wire 1/25

Choose a color for your spark plug wires.This can also be used for large detailing wire, if the other Pro Tech wire choices aren't large enough.Available colors:BlackRedBlueYellowOrangeGrayOne length of wire .018" x 3', by Pro Tech.Specify color.

Barry Grant DEMON 4bbl Carburetor 1/16

Detailed Barry Grant 4bbl CarburetorWith single or dual carbs, you'll need Pro Tech's 1/16 scale Fuel Junction Block.Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the T fitting to split the fuel line to each carb. One...

Holley Dominator 4bbl Carburetor 1/16

Detailed Holly Dominator 4bbl CarburetorWith single or dual carbs, you'll need Pro Tech's Fuel Junction Block.Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the T fitting to split the fuel line to each carb. One per...

Drag Racing Full Face Helmet 1/16

Detailed Full Face Helmet. Ready for your custom paint design.  Looks right at home on the cockpit seat or the hood of that Pro Mod car. One per package. Resin

Drag Racing Parachute 1/16

Detailed Drag parachute.One per package.Resin

Barrel Valve 1/16

A barrel valve is located on the left side of a supercharged engine injector hat. The fuel input is via a braided line from the fuel pump and 2 outlet braided lines go to 2 fuel junction blocks (see ENGINE DETAILING).Designed for Pro Tech .035 Braided...

Dual Remote Oil Filter 1/16

Each package contains 1 adapter and 2 oil filters.   See the Braided Lines and Fittings to complete the plumbing of the oil lines. Adapter is metal cast and can be polished.  Filters are machined aluminum   

Aluminum Oil Filter 1/16

Each package contains 1 filter. Machined aluminum  

MSD 7 Ignition Box 1/16

Each package contains 1 MSD 7 ignition box. See 'Detailing Wire, Small' to enhance this item.Resin