Futurattraction

RBS Square 4-Hole Hat with Butterflys, 1/25

This is a CAD designed replica of an RBS Square 4-Hole Injector Hat, in 1/25 scale. The intake openings are hollowed out. Small holes across the front openings are provided for a rod to connect the...

Rear Tube Frame/Clip .700" Wide 1/25

Here's  a round-tube rear frame clip ready to install.  It's 3D printed in FUD material (see below). Dimensions are:Frame width = .700" (about 45/64", 17.8mm)Frame tube diameter = ...

Rear Tube Frame/Clip .800" Wide 1/25

A round-tube rear frame clip ready to install.  It's 3D printed in FUD material. Dimensions are:Frame width = .800"Frame tube diameter = .080"Cross member diameter = .080"Overall length = 2...

Rear Tube Frame/Clip .900" Wide 1/25

Here's  a round-tube rear frame clip ready to install.  It's 3D printed. Dimensions are:Frame width = .900" (about 29/32", 22.9mm)Frame tube diameter = .080"Cross member diameter = ...

Rectangular Frame Rails 1/24-1/25

This rear frame rail replicates a mandrel bent rectangular rear clip in a 2"x 3" size. Dimensions: Rails are .125" x .080" Cross members are 060" diameter Total length is 2.6"   The...

Round Exhaust Bezels Doorslammer, Pro Mod, 1/25

These bezels are the perfect way to finish the fender exit holes if the headers exit perpendicular to the body. They are especially well-suited for Doorslamers or Pro Mods. Oval bezels are also...

Round Fender Exhaust Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the bezels used on modern Pro Mod and other cars where the exhaust exits the fender well, just behind the front wheel. The inside diameter is .25". These are...

Round Window Bezels Doorslammer, ProMod, 1/25

These window bezels are intended to add a finished look to the emergency access hole that is required in many doorslammer cars so track personnel can reach through a window to open the door in case...

Round Window Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the window bezels used on modern Pro Mod and other cars for ventilation and pressure equalization. Photo Etched, (2 pr) 

Sander Engineering 750 Rear Wheels 1/25

A pair of Sander 750 Series rear wheels In 1/25 scale. Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions  Wheel dimensions:Width .730"Outside Diameter ...

Sander Engineering Front Wheels 1/25

A pair of Sander Engineering front wheels.Includes: Outer Rims Inner and Outer Center Inserts Hubs Instructions Will fit Futurattraction's Front Runner tires and Drag Special tires...

Sander Engineering Rear Wheels 1/24

A pair of Sander Engineering rear wheels in 1/24 scale.Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions Wheel dimensionsWidth .730"Outside Diameter .730" WIll fit the...

SBC Tunnel Ram & Lenco 1/25

An all new, highly detailed, complete 429cid Ford engine with the Boss 429 cylinder head/valve cover combo. Perfect for that '80s to '90s Pro Stock racer. Included is everything needed to...

Slotted Rotor 4-Piece Set 1/16

Slotted, 4-rotor set - front and rear. Front rotors equal a scale diameter of 10". Rrear rotors equal a scale 11.75" @ 1/16 scale.   Photo of a real slotted rotor with dual calipers. For...

Slotted Rotor, .063" 4-Rotor Retrofit Set 1/25

Slotted, 4-rotor set with 3D-printed hubs for the rear rotors. Front rotors equal a scale diameter of 10" with .093" center holes. Rear rotors equal a scale 11.75" @ 1/25 scale with .125" center...

Slotted Rotor, .125" 4-Rotor Retrofit Set 1/25

Slotted, 4-rotor set with .125" holes in rear rotors. This is roughly the diameter of steel kit axles. Front rotors have .093" center holes which will fit the spindles in Futurattraction's front...

Small Block Engine Crank Trigger 1/16

Here is a Crank Trigger kit, for a small block engine and especially for the small block Chevy. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered...

Small Block Engine Crank Trigger 1/25

Here is a Crank Trigger kit, for a small block engine and especially for the small block Chevy. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered...

Small Block Ford Engine Crank Trigger 1/25

Here is a Crank Trigger kit, for a small block Ford engine. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more...

Spark Plug Wire Loom Set 1/25

A nice set of photo etched wire looms. Spreaders are in 2, 3 and 4-hole configurations. If using soft .020" (or smaller) rubber wires, use the looms as they are. If using solid wire, It is necessary...

Sportsman 4-Link Suspension Kit for Revell 1/25

4-Link multi-media kit replicates styrene 4-link in Revell top sportsman kit. Fits Revell kit rear ends or rear ends with .125" OD axle housing with no back brace. Kit includes chassis and rear...

StarLite 'Narrow' Rear Wheels 1/25

A pair of StarLite rear wheels for smaller, narrow slicks. This is Futurattraction's own custom design. These wheels are best suited for earlier drag racing slicks, as compared to modern P/M, T/F...

Starlite Front Wheels 1/25

A new custom wheel design by Futurattraction.  These are spindle-mount wheels and fit Futurattractions' spindle front strut kit.  They are a simple 5-point star design, but have a...

Starlite Rear Wheels 1/24

A new custom wheel design by Futurattraction.  These match Futurattraction's front spindle-mount wheels   They are the same 5-point star design and can also use a color-coordinated...

Steering Wheel 1/16

Sport Steering Wheel kit. The wheel grip is mastered in 3D and will be sold as either 3D-printed or resin, depending on availability. Three-spoke wheel center is photo etched and replicates Grant...

Steering Wheel 1/25

Sport Steering Wheel kit. The wheel grip is mastered in 3D and will be sold as either 3D printed or resin, depending on availability. Three-spoke wheel center is photo etched and replicates Grant...

Stock Width 9" Rear End & Brake Kit 1/25

Here is a complete 9" Ford OEM-style rear end with brakes. This version is the stock width (2-1/4") and there is a narrowed width Ford 9" found here. The width can be shortened to fit your needs by...

Stock Width 9" Rear End & Brake Kit, Black 1/25

Here is a complete 9" Ford OEM-style rear end with brakes. This version has the rear housing and axle tubes molded in black resin with a white carrier. This version is the stock width (2-1/4") and...

Stock Width 9" Rear End 1/25

Here is a nicely detailed 9" Ford OEM-style rear. This version is the stock width (2-1/4") and there is a narrowed width Ford 9" found here. This rear is also available with an included brake set...

Strange Ultra Rear End & Brake Kit 1/25

This all-in-one, super detailed, rear end kit is a scale replica of Strange's modular rear end. Includes rear end, rotors, calipers and 4-link brackets. This particular rear is very popular in Pro...

TBM 4-Rotor Set 1/25

TBM style, 4-rotor set. Front rotors equal a scale diameter of 10". Rear rotors equal a scale 11.75" @ 1/25 scale. These rotors can replace any rotors in Futurattraction's front and rear brake...

Throttle Linkage Set, 1/25

A throttle linkage set with pins added to the ends of the linkage components. This will provide a more stable attachment point for linkage rods, etc. Depending on your attachment, the pin may...

Weld AlumaStar 'Narrow' Rear Wheels 1/25

A pair of Weld AlumaStar rear wheels for narrow, smaller slicks.  These wheels are best suited for earlier drag racing slicks, as compared to modern P/M, T/F wide slicks. Check out...

Weld AlumaStar 5-Spoke Narrow Front Wheel, 1/16

A 3D-printed reproduction of Weld's AlumaStar 15" x 3.5" front wheel. The five spokes are centered in a .28" width wheel with a 1.04" diameter rim. The raised center of the rim OD will fit...

Weld AlumaStar Front & Rear 4-Wheel Set 1/24

A 4-wheel set of Weld AlumaStar racing wheels in 1/24 scale. SAVE $5.00 OVER BUYING THE FRONT AND REAR WHEELS SEPARATELY. Includes: Outer Aluminum Rims Inner and Outer Photo Etch Center...

Weld AlumaStar Front Wheels 1/25

A pair of Weld AlumaStar front wheels.Includes: Outer Rims Inner and Outer Center Inserts Hubs Instructions A Front Strut spindle kit is available for these wheels.  The nose of the...