Futurattraction

Brake Kit, Slotted Rotor .125" - Rear 1/25

A detailed complete rear end brake set. This slotted rotor set is designed to work with a .125" diameter kit axle but allows the use of separate calipers and PE brackets, for more realism...

Cam Lock Safety Harness Set 1/16

Here is a set of highly detailed cam-lock safety harness hardware. Belt material is not included. Assembly required.   Photo etched pieces are made from .015" nickel-silver plate, 1/16...

Carbon Fiber Seat 1/25

A simple one-piece seat for a dragster, FC, P/M, etc. The seat has reliefs in each side to allow for seat belts or safety harness material. My seatbelt/harness material will fit the seat reliefs...

Centerline Wheels 4-Set 1/24

A set of front and rear Centerline wheelsIncludes wheel fronts and custom open rear rings (for visible brake detail). Rear wheel is .73" OD. Overall width with rear ring is .66"Front wheel is .65"...

Central Frame Rail 1/24-1/25

  Want to build your own chassis to fit in that drag racing body? This central frame rail is a vital component containing the cockpit area.This is a one-piece item and doesn't need any assembly...

Chassis Tab & Bracket Set 1/16

These brackets and tabs can be used in a variety of build environments and will fit .102" frame rails. Use where you need a bit of detail or an attachment point for a handle, gusset, tank,...

Clutch Can BBC-SBC 1/25

 Here is an item every race car needs and is required in almost all NHRA classes. This clutch will contain a clutch/flywheel explosion. This is a replica of a real world Trick Titanium clutch...

Clutch Can HEMI 1/25

 Here is an item every race car needs and is required in almost all NHRA classes. This clutch will contain a clutch/flywheel explosion. This is a replica of a real world Trick Titanium clutch...

Cockpit Detail Set, Funny Car, Top Fuel 1/16

This cockpit detail set will finish off your Funny Car or Top Fuel racer. Enough for two cars. Set includes (2 each): Butterfly steering wheel    Handle grips (4 per...

Cockpit Detail Set, Funny Car, Top Fuel 1/25

This cockpit detail set will finish off your Funny Car or Top Fuel racer. Enough for two cars. Set includes (2 each): Butterfly steering wheel    Handle grips (4 per...

Coil Over Shock Kit 1/16

Here is a complete, realistic appearing, coil over shock kit, with all of the parts needed to detail your suspension. They are static and once assembled are not movable. These coil-overs...

Coil Over Shock Kit 1/25

Here is a complete, realistic appearing, coil over shock kit, with all of the parts needed to detail your suspension. Kit includes:    3D-printed 2-piece shock bodies Resin...

Coil Spring .250" x .125" (pair) 1/25

These springs are used on Fururattraction's Front Strut kits, but can be used in any suspension system that requires the dimensions below. The ends are ground flat.    Total height...

Coil Spring .375" x .125" (pair) 1/25

These springs are used on Fururattraction's Coil Over Shock kits, but can be used in any suspension system that requires the dimensions below. The ends are ground flat.    Total...

Cragar 15" SuperTrick Wheels 4-Set, Hub 1/24

A highly detailed set of front and rear Cragar Super Trick wheelsThese Cragar's replicate 15" wheels used on 1970s-80s era drag cars.  Crowned centers are present on both front and rear wheels,...

Cragar 15" SuperTrick Wheels 4-Set, Hub Mount 1/25

A highly detailed set of front and rear Cragar Super Trick wheelsThese Cragar's replicate 15" wheels used on 1960s-80s era drag cars.  Crowned centers are present on both front and rear wheels,...

Cragar 15" SuperTrick Wheels 4-Set, Spindle 1/25

A highly detailed set of front and rear Cragar Super Trick wheelsThese Cragar's replicate 15" wheels used on 1960s-80s era drag cars.  Crowned centers are present on both front and rear wheels,...

Cragar DragStar Wheels 4-Set 1/24

A set of front and rear Cragar DragStar wheelsIncludes wheel fronts and custom open rear rings (for visible brake detail).Photo above shows a rear wheel in a Futurattraction Good Year slick for...

Dana - Narrowed Rear End & Brake Kit 1/25

Here is a complete Dana narrowed rear end with brakes. Overall with between axle tube ends is 1-7/8" Kit includes: Narrowed housing Rear cover Housing ends including one spare Resin brake...

Dana - Rear End & Brake Kit, Stock Width 1/25

Here is a complete Dana standard width rear end with brakes. The rear end and axle tubes are molded in resin. Overall length between axle tube ends is 2.25" A 'bare' Dana rear without the brake...

Dana Rear End, Standard Width, Bare 1/25

Here is a Dana rear end in a standard width, molded in white resin. Overall length between axle tube ends is 2.25" The width can be shortened to suit your build by cutting the axle tubes. A Dana...

Door Lever Set - Doorslammer or Street Machine 1/16

Door car levers to detail that race car or street machine interior.  These levers can be used in any type of build. They can be used for interior or exterior handles as well as...

Drag Slicks 11x30x15 1/25

These Drag Slicks are great for smaller horsepower cars or for earlier drag machines.   The tread width equals 11". Dimensions: Overall Width = .590"Diameter = 1.235"Wheel Opening =...

Drag Slicks, 14x32x15 1/25

These Drag Slicks equal a scale 14x32-15 tire.  The tread width equals 14" and the overall width, with sidewalls equals 18". To determine if these will fit your needs, here are the actual...

Drag Slicks,16x33x16 1/25

These Drag Slicks equal a scale 16x33-16 tire.  This is representative of a current Pro Stock drag slick. To determine if these will fit your needs, here are the actual dimensions:Overall Width...

Drag Slicks,17x36x16 1/25

These Drag Slicks equal a scale 17x36-16 tire.  This is representative of a current Pro Mod, FC or TF drag slick. Dimensions:Overall Width = .85"Diameter = 1.46"Tread Width = .70"Wheel Opening...

Drag Special Front Tires 1/25

A Moroso narrow front drag tire with really nice tread detail. Will fit the Revell/Monogram style drag front wheels. This tire is similar to Futurattraction's Front Runner tire, except this one is...

Dragster Accelerator Pedal Set 1/16

These dragster pedals replicate modern tubular constructed accelerator pedals. They incorporate a safety return loop on both the top and side. Choose whichever one you wish and remove the other...

Drilled 4-Rotor Set 1/25

Drilled, 4-rotor set. Front rotors equal a scale diameter of 10" with .093" ID. Rear rotors equal a scale 11.75" with .125" ID. These rotors can replace any rotors in Futurattraction's front and...

Drilled Rotor 4-Piece Set 1/16

Drilled, 4-rotor set. Front rotors equal a scale diameter of 10". Rrear rotors equal a scale 11.75" @ 1/16 scale. For rear rotors only, click here.   Four pieces, photo etched .015"...

Drilled Rotor Pair, Large/Rear 1/16

Drilled, large 2-rotor set - These represent a scale diameter of 11.75" @ 1/16 scale. These would be used as rear rotors.  For a set of front and rear rotors, click here.   One pair,...

Dzus Fasteners, Photoetched 1/25

These self-ejecting Dzus buttons are used primarily to hold down body sections. They mount to the outside of the body and replicate real world quarter-turn fasteners. Here is a real-world Dzus...

Dzus Mounting Plate Combo Pack, 1/25

Here is a smaller quantity of four different types of Dzus mounting plates. Attach them to the chassis and body to provide anchor points. See also the Type 2 longer mounting plates or the...

Dzus Mounting Plates 1/25

These standard, short mounting plates, attach to the chassis or other structural member and provide an anchor point for the Dzus fastener. See also the Type 2 longer mounting plates or the...

Dzus Mounting Plates Lightweight 1/25

These light weight mounting plates, attach to the chassis or other structural member and provide an anchor point for the Dzus fasteners. See also Tpye 1 and Type 2 mounting plates for different...

Dzus Mounting Plates Type 2 1/25

These standard, long mounting plates, attach to the chassis or other structural member and provide an anchor point for the Dzus fastener. See also the Type 1 shorter mounting plates or the...