Futurattraction

Engine Bay Tin, '67 Camaro 1/25

This tin work fits Revell's 1967 Camaro. Great for that pro street or race car look!t This is a Tight fit and may require a bit of filing on the outer edges.   Photo etched, 1/25...

Engine Bay Tin, '69 Camaro 1/25

This tin work fits Revell's 1969 Camaro. Great for that pro street or race car look!t This is a Tight fit and may require a bit of filing on the outer edges.   Photo etched, 1/25...

Engine Pulley Set, Circle Design, 1/25

A different type of pulley set. These are photo etched and the pieces stack to give the pulley depth. You could also cut a piece of round styrene or aluminum rod or tube as a spacer between the...

Engine Pulley Set, Star Design, 1/25

A different type of pulley set. These are photo etched and the pieces stack to give the pulley depth. You could also cut a piece of round styrene or aluminum rod or tube as a spacer between the...

Fabricated 9" Rear End & Brake Kit 1/25

A newly designed Fabricated 9" Ford back-braced rear end set with brakes and associated parts. Axle tubes are .125" OD. Kit includes: One piece braced housing with fill cap and drain...

Fairmont 1978 Dyno Don Decals1/25

1978 Dyno Don Fairmont DecalsThese decals represent the livery that Dyno Don's '78 Fairmont wore the year after he won the 1977 NHRA Pro Stock Championship with his Mustang II.  Decals by Chuck...

Fairmont 1978 Pro Stock Bob Glidden Decals1/25

These decals reflect the appearance of Bob Glidden's Fairmont Futura Pro Stock during the 1978 season.     This decal set is designed to fit Futurattraction's Pro Stock Fairmont body...

Fairmont 1979 Dyno Don Decals1/25

1979 Dyno Don Nicolson Fairmont DecalsThis set of decals represents the paint job on Dyno Don's 1979 Fairmont. The "205" shown on his entry number indicates that he finished 5th in Division 2 the...

Fairmont 1981 Pro Stock Bob Glidden Decals1/25

Bob Glidden's 1981 NHRA pro stock Fairmont decal set.   The year after he won the Pro Stock championship in his similar appearing 1980 Fairmont.  There are subtle differences between the...

Fairmont Drag Racing Body 1/25

A complete Fairmont drag race body kit (minus hood which is purchased separately) with additional options listed below. A Pro Stock version of this Fairmont is also available.  Dyno Don...

Fairmont Pro Stock Drag Racing Body Kit w/ Shipping 1/25

This Fairmont body kit includes a shipping charge by Futurattraction, who will ship this direct to you.  Each kit is custom made to your choices. This kit contains all of the items included in...

Ford Boss 429 & Lenco 1/25

An all new, highly detailed, complete 429cid Ford engine with the Boss 429 cylinder head/valve cover combo. Perfect for that '80s to '90s Pro Stock racer. Included is everything needed to...

Ford Cleveland 351 & Lenco 1/25

An all new, highly detailed complete, 351cid small block Ford engine with Cleveland heads.  Perfect for that '70's to early '80s Pro Stock racer. This engine is designed completely from a...

Forward Frame Rail & R&P, 1.05” Wide, 1/25

 Building your own chassis with a front strut suspension? This Forward Frame Rail will save you a ton of time.This is a one-piece item and doesn't need any assembly. It incorporates upper...

Front Brake Kit , Slotted Rotor .093" Spindle Diameter 1/25

A really nice brake set for the front wheels. This slotted rotor set is designed to work with a .093" (3/32) spindle diameter and allows the use of separate calipers and PE brackets. 3D calipers...

Front End Mounting Brackets 1/16

These brackets are intended to simulate the mounting brackets used to locate removable front ends from drag or other styles of cars.   Photo etched, 1/16 scale, by Futurattraction...

Front End Mounting Brackets 1/25

These brackets are intended to simulate the mounting brackets used to locate removable front ends from drag or other styles of cars.   Photo etched, 1/25 scale, by Futurattraction...

Front Runner Tires - Soft Rubber 1/16

DUE TO POPULA DEMAND, THESE WENT FAST, BUT THERE ARE MORE COMING ON A FIRST COME FIRST SERVED BASIS Front drag tire patterned after Goodyear Frontrunner tires. These are made with a really soft...

Front Runner Tires 1/25

Front drag tire patterned after Goodyear Frontrunner style. Designed to be direct fit for R/M style drag front wheels. Dimensions: 1" OD.65" (21/32")  ID.25" wide Click here for a free...

Front Strut Gusset Kit 1/16

These gussets are intended to add both structural as well as added detail to the upper strut mount. There are enough for approximately seven cars. These gussets are intended to fit around a 9/64" (...

Front Strut Gusset Kit 1/25

These gussets are intended to add both structural as well as added detail to the upper strut mount. There are enough for approximately seven cars. These gussets are intended to fit around a 3/32 (...

Front Strut Kit for Aluminum Wheels, TBM Rotors 1/25

This is a complete 28 piece strut front end kit for 5-bolt wheels (a strut set for spindle wheels is found here. The nose of the 3D spindle is designed to center in Futurattraction's 5-bolt...

Front Strut Spindle Suspension Kit with Drilled Rotors 1/25

Here is a complete front strut kit, with all of the parts needed for a detailed front suspension. This is a static suspension and not functional. Kit includes (28 pieces): 3D-printed strut...

Front Strut Suspension Kit with Drilled Rotors 1/25

Here is a complete front strut kit, with all of the parts needed for a detailed front suspension. This is a static suspension and not functional. This set is for 5-bolt hub mounted wheels. Kit...

Fuel Cell Set 1/25

A pair of 3D-printed fuel cells with photo etched ring and strap material. Includes:Two 3D-printed fuel cellsPhoto etch rings and latch detailThe fuel cells have recesses for the PE detail to seat...

Hand Brake & Lever Set 1/25

Levers for a Hand Brake and small levers for a parachute release or other use. Enough for two builds.   Photo etched, 1/25 scale.

Hand Brake Levers for for PM or TF 1/16

A set of Hand Brake Levers for your Dragster or Funny Car.  Adds realism and detail to your build. Contains two brake levers with additional hand grips. Place a small piece of styrene...

Hand Brake-Parachute Lever Set 1/25

A pair of levers for a Hand Brake to add detail to your cockpit. Enough for two builds. Contains two levers and hand grips plus 2-sizes of additional small levers for a parachute release or other...

Holley Dominator & PE Details, Pair 1/16

Holley Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage Contains 2 carbs and PE details.   Photo shows completed carb and is for illustration only. Assembly required...

Holley Dominator Carb & PE Details, Pair 1/25

Holley Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage.  These carbs were drawn in CAD and capture as many features as possible of Holley's decades-famous Dominator race...

Holley Dominator Multi-Media, Pair 1/16

Holley Dominator multi-piece Carb Kit with Photo Etch Air Horn and Linkage Carbs separate into separate main body, metering blocks and float bowls for extra detailing! The carb bodies are based off...

Holley Split Dominator & PE Details, Pair 1/25

Holley Split Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage Contains 4 split carbs and PE details.   Photos of completed carbs are for illustration only. Assembly...

Hub Wheel Front Strut Kit, Slotted Rotors 1/25

This strut front end kit is made to accommodate 5-bolt, hub mounted wheels. The nose of the strut body is designed to center in the spindle cap and includes 3D-printed hubs to fit to the back side...

Hurst Shifter Set 1/25

This iconic shifter was THE shifter for drag racing, muscle cars, gassers and street machines in the '60's. Includes 3 different arms and shifter linkage. You'll find various shifter knobs, like the...

Injector Butterfly Set for Competition Resins Enderle Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resins Enderle injector hat (part #035).  Click...

Injector Butterfly Set for Competition Resins Injector Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resin's '70's Ribbed injector hat...