Wheels & Tires

Salt Lake Style Moon Wheel Covers 15" 1/25

A set of four spun aluminum large Moon hubcaps. These are found on early custom cars and often found on Salt Lake racers. This is made of solid aluminum and has a flat back. Measures 5/8" diameter or a scale 15". Four aluminum pieces by Parts by Parks,...

Salt Lake Style Moon Wheel Covers 16" 1/25

A set of four spun aluminum large Moon hubcaps. These are found on early custom cars and often found on Salt Lake racers. This is made of solid aluminum and has a flat back. Measures 11/16" diameter or a scale 16". Four aluminum pieces by Parts by Parks,...

Weld Pro Star 4-Wheel Set 1/25

A set of four Weld Pro Star Racing Wheels - front and rear. Photo shows centers as one solid piece but the '5-spokes' cut out. Includes deep rear wheels and front wheels showing lug nuts.   Contains 2 pairs resin wheels, 1/25 scale.

Gasser Slotted Front Wheels 1/25

A pair of 5-slot front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Fenton Front Wheels, but these have slightly smaller slots    One pair of resin wheels by Competition Resins, 1/25 scale.

Top Fuel Wheel Set 1/25

A set of four Racing Wheels for a TF dragster - front and rear. Features a thin front wheel with a deep rim in order to make sure the timing lights are tripped at the end of the quarter mile. The 2-piece front wheel will accept the 'bicycle tire' found...

Bear Claw' Rear Wheels 1/25

A pair of deep rear wheels. Similar to an ET III style wheel.    Contains 2 resin wheels 1/25 scale.

Hella's 23" Wheels & Tires (2 pair) 1/24-1/25

A set of four 23", deep dish, 5-slot, chrome wheels with low profile tires. Includes 'knock-off' spinners. Sidewall and tread width is .45" (29/64") Like the wheels but don't want low profile tires?  Take these tires off and replace with other tires...

Fenton/Anson Front Wheels 1/25

A pair of 5-slot Fenton (or Anson) front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Gasser Front Wheels, but these have larger slots  OD = .67", 17mm Overall Width = .19", 5mm   The wheels that will...

Wide Rear Steel Wheel Pair 1/25

A pair of deep rear wheels. These are stock looking steel wheels with lug nuts, except they're wide to hold big rubber. Great for street racers, early Super Stock or Pro Stock and Rat Rods. Width/Depth = .33" (11/32")   Contains 2 resin wheels by...

MiniLite Road Racing Wheel Set 1/25

A set of four road MiniiLite Racing Wheels. Unlike the racing set of MiniLite wheels, these are all the same size.   Contains 4 resin wheels by Competition Resins, 1/25 scale.

Pirelli Type Small Front Racing Tires 1/25

These front tires will work for a Gasser as well as a Pro Mod or street racer. These are slightly smaller than the Futurattraction Front Runner tires. These are semi hard tires but still flexible. Measurements:Outside Diameter = .98"Overall width = ...

Good Year Dragster Slicks 1/25

These are labeled '60's Goodyear Dragster Slicks but depending on the size you want, these will work for any racer. "Good Year" is in raised letters on both sides. These are slightly smaller than the Comp Resins' Pro Stock slicks. These are fairly...

American Trak Star Front Wheels 1/25

American Racing TrakStar Front Wheels  This is 5-bolt mounted, not spindle mounted. Brand new and I only have a limited quantity to start with. These American Racing front wheels match the Trak Star rear wheels.   Here's a  photo of...

American Trak Star Rear Wheels 1/24

American Racing TrakStar Rear Wheels in 1/24 scale   Brand new and I only have a limited quantity to start with. These American Racing rear wheels match the Trak Star front wheels. Here's a  photo of the real wheel with a beadlock ring...

Dragster Wire Wheels 1/24

Finally, a wire wheel with real spokes that looks realistic. Fully assembled and includes rubber O-Ring tires. For a textured/treaded bicycle tire, look here. These fit perfectly. Featuring small hubs and thin-walled rims for a...

Dragster Wire Wheels 1/25

Finally, a wire wheel with real spokes that looks realistic. Fully assembled and includes rubber O-Ring tires. Featuring small hubs and thin-walled rims for a proportional appearance.   The hub utilizes 3/32" aluminum tubing that will fit...

Weld V-Series Front Wheels 1/25

A pair of Weld V-Series front wheels to match the VSE rear wheels.Includes: CNC Aluminum Rings 2-Piece PE Centers Instructions  These are hub-style mount wheels, NOT spindle mount.            Photo of real...

CL's 19" Wheels & Tires 4-Set 1/24

A set of four chrome wheels with low profile tires. Sidewall and tread width is .45" (29/64") Like the wheels but don't want low profile tires?  Take these tires off and replace with other tires. All four wheels/tires are the same size (not big and...

Drag Slicks Pro Stock 1/25

Pro Stock Drag Slicks.  Although the package is titled 70's style slicks, they will obviously work for many drag racing types. The slicks are a lower profile and smaller in general than other slicks I carry. These are fairly hard tires and extra...

Hub Wheel Front Strut Kit, Slotted Rotors 1/25

This strut front end kit is made to accommodate 5-bolt, hub mounted wheels. The nose of the strut body is designed to center in the spindle cap and includes 3D-printed hubs to fit to the back side of the wheel. Also available is a Wishbone set that...

Ladder Bar Set 1/25

Ladder bars were a popular means of improving traction on early pro stock cars, as well as more modern bracket and class cars. This ladder bar set has everything you need   It includes all hardware, pre-cut formed-wire rod ends, RB Motion nut...

Slotted Rotor, .063" 4-Rotor Retrofit Set 1/25

Slotted, 4-rotor set with 3D-printed hubs for the rear rotors. Front rotors equal a scale diameter of 10" with .093" center holes. Rear rotors equal a scale 11.75" @ 1/25 scale with .125" center holes. 3D-printed hubs are included to reduce the rear...

Baby Moon Hubcaps 2 1/25

A set of four polished aluminum baby moon hubcaps. They would look great chrome reversed wheels by Pegasus. This is made of solid aluminum and is not hollow on the back. You may have to route out the back so it would seat over your wheel detail, like...

Wheel Beauty Rings, Flat 1/25

A set of four polished aluminum beauty rings with a flat edge. Polished aluminum rings to set those wheels off and a period correct look for the '50's - '60's. They would look great next to the Baby Moon Hubcaps by Parts by Parks. Measures 5/8"...

Beadlock Rings Billet Specialties, 1/24

A set of 4 Narrow, scallopped rings with holes all the way around. The beadlock rings are die cast and silver in color.   Photo of actual beadlock ring in black.   The rings are on a protective backing and I didn't want to peel one...

Drag Slicks,17x36x16 1/25

These Drag Slicks equal a scale 17x36-16 tire.  This is representative of a current Pro Mod, FC or TF drag slick. Dimensions:Overall Width = .85"Diameter = 1.46"Tread Width = .70"Wheel Opening =.715" The tire ID is designed to work with earlier...

ET III Style Rear Wheels 1/25

ET III 'Bear Claw' style rear drag racing wheels. Popular in the '60's on street and drag machines.                         Photos of real wheels          ...

Disc Brake 23" Rotors with Calipers, Chrome (2 pair) 1/24-1/25

A set of four 23" diameter disc brakes with molded-in calipers. The discs are drilled and chrome plated. Outside diameter dimension is .67", 17mm. Four resin discs/calipers, chrome plated, 1/24-1/25 scale, by Pegasus, .    

Weld Delta 1 Rear Wheels 1/24

A pair of Weld Delta 1 rear wheels in 1/24 scale. These are one-piece CNC machined aluminum wheels. Includes: CNC Aluminum Rings PE Centers Instructions    PHOTO OF REAL DELTA 1 WHEEL WITH A BEADLOCK RING (not included) Wheel...

Beadlock Rings, Weld 1/24

A set of 4 Weld Beadlock Rings for your rear wheels. The beadlock rings are die cast and silver in color. The rings are on a protective backing and I didn't want to peel one off, so these measurements might be slightly off but close enough. OD - ...

Billet Specialties Comp5 Front Wheels 1/25

A pair of Billet Specialties front wheels in 1/25 scale.Includes: Outer Rims Inner and Outer Center Inserts Hubs Instructions A Front Strut spindle kit is available for these wheels.  The nose of the spindle is designed to...

Billet Specialties Comp5 Rear Wheels 1/25

A pair of Billet Specialties rear wheels.Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions   Wheel dimensions:Width .730"Outside Diameter .730" Note the difference between the 1/24 version (left) and the 1/25 version...

Weld Magnum Rear Wheels 1/25

A pair of Weld Magnum rear wheels In 1/25 scale. Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions  Wheel dimensions:Width .730"Outside Diameter .730" Note the difference between the 1/24 version (left) and the 1/25...

Weld Magnum Front Wheels 1/25

A pair of Weld Magnum front wheels.Includes: Outer Rims Inner and Outer Center Inserts Hubs Instructions A Front Strut spindle kit is available for these wheels.  The nose of the spindle is designed to center in the spindle cap and...

Weld AlumaStar Rear Wheels 1/24

A pair of Weld AlumaStar rear wheels In 1/24 scale. Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions Matching front wheels are also available.   Note the difference between the 1/24 version (left) and the 1/25...

Weld AlumaStar Front Wheels 1/25

A pair of Weld AlumaStar front wheels.Includes: Outer Rims Inner and Outer Center Inserts Hubs Instructions A Front Strut spindle kit is available for these wheels.  The nose of the spindle is designed to center in the spindle cap and...