Wheels & Tires

Late '50s MoPar Hubcaps 1/25

A set of four polished aluminum hubcaps found on 1950's MoPar's. Almost a 'moon' hubcap, but they come to point in the center. They're similar to these '57 Plymouth hubcaps, but they're entirely smooth.   Real aluminum hubcaps to set off your...

Goodyear Tires & Fenders Decals , 1/25

Goodyear decals in many forms. Can be put on your tires or on your car body as an advertiser. See the product photo for a better idea of what's included.   GoodYear in a straight line in red, black, yellow and blue. Large and small arched...

M&H Racemaster 'Pie Crust' Slicks 1/25

M&H Racemaster 'Pie Crust' Drag Slicks, black wall. Raised 'M&H Racemaster' lettering on one sidewall. Letters are slightly raised.Fairly soft rubber cast tires. Tire Measurements: Diameter = 1.18"Overall Width = .46"Tread Width = .37Wheel...

Cragar 15" SuperTrick Wheels 4-Set, Hub Mount 1/25

A highly detailed set of front and rear Cragar Super Trick wheelsThese Cragar's replicate 15" wheels used on 1960s-80s era drag cars.  Crowned centers are present on both front and rear wheels, with double-drilled pattern on rear wheels.Front wheels...

Dragster Wire Wheels with Light Shield 1/25

Real wire wheels with real spokes and one wheel has a 'light shield' on one side for newer dragsters. The light shield provides a larger area for the timing light to trigger at the end of the strip. Fully assembled and includes rubber O-Ring tires...

Dana - Rear End & Brake Kit, Stock Width 1/25

Here is a complete Dana standard width rear end with brakes. The rear end and axle tubes are molded in resin. Overall length between axle tube ends is 2.25" A 'bare' Dana rear without the brake kit is available here. The product photo shows a white...

Drag Racing Tire Decals #1, 1/25

Racing tire manufacturers, in yellow and white, are included in various sizes for each one. Includes (in yellow): Goodyear (three sizes) Eagle (two sizes) Includes (in white) M/T (three sizes) Goodyear (three sizes) Eagle (three...

Drag Racing Tire Decals #2, 1/25

Some the racing tire manufacturers are included in four sizes for each one. Includes (in white): Hoosier Firestone M&H Racemaster Drag 500 Shown in color for body decals: RaceMaster (two designs) Firestone (three designs) Hoosier (two...

M/T Treaded Pro Street/Sportsman Rear Tires, Pair 1/25

This treaded M/T Pro Street/Sportsman tire set is based on a 29 x 12.5-15 tire, They'll also look great on a street rod, rat rod or a mean street machine. They are designed to fit 1/25th scale wheels.  Tire width is ~.400" Rear tire is...

American Trak Star Rear Wheels, 1/25

American Racing TrakStar Rear Wheels in 1/25 scale   Brand new and I only have a limited quantity to start with. These American Racing rear wheels match the Trak Star front wheels. Here's a  photo of the real wheel with a beadlock ring...

Billet Specialties Comp5 Rear Wheels 1/24

A pair of Billet Specialties rear wheels in 1/24 scale.Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions   Wheel dimensions:Width .730"Outside Diameter .730"   Note the difference between the 1/24 version (left)...

10 Hole Wheel Center with Billet Center Caps 1/24-1/25

Turn your old wheel into a 10-Hole wheel. Includes: Center 10-hole discHubs (fit 1/16" axle)Knock- off spinnersHex nuts   By Detail Master, 1/24-1/25 scales.

70's Pro Stock Front Tires - Firestone Drag 500 / Goodyear, 1/25

These front tires will work for a Gasser as well as a Pro Mod or street racer.   Has Firestone Drag 500 & Goodyear MarkingsCast from Medium Soft Rubber These are semi hard tires but still flexible. Measurements:Outside Diameter = .1...

Stock Width 9" Rear End & Brake Kit 1/25

Here is a complete 9" Ford OEM-style rear end with brakes. This version is the stock width (2-1/4") and there is a narrowed width Ford 9" found here. The width can be shortened to fit your needs by cutting the axle tubes. Kit includes: Stock...

American Trak Star Front Wheels 1/24

American Racing TrakStar Front Wheels  This is 5-bolt mounted, not spindle mounted. Brand new and I only have a limited quantity to start with. These American Racing front wheels match the Trak Star rear wheels.   Here's a  photo of...

Weld V-Series Rear Wheels 1/25

A pair of Weld V-Series rear wheels.Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions Wheel dimensions:Width .730"Outside Diameter .730" Note the difference between the 1/24 version (left) and the 1/25 version (right) below...

Starlight Rear Wheels 1/25

A new custom wheel design by Futurattraction.  These match Futurattraction's front spindle-mount wheels   They are the same 5-point star design and can also use a color-coordinated (front or rear half) paint scheme. Includes: CNC...

Weld Magnum Rear Wheels 1/24

A pair of Weld Magnum rear wheels In 1/24 scale. Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions  Wheel dimensions:Width .730"Outside Diameter .730" Note the difference between the 1/24 version (left) and the 1/25...

Billet Specialties Comp7 Rear Wheels 1/25

A pair of Billet Specialties COMP7 rear wheels in 1/25 scale.Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions   Wheel dimensions:Width .730"Outside Diameter .730" Note the difference between the 1/24 version (left) and...

Weld AlumaStar Rear Wheels 1/25

A pair of Weld AlumaStar rear wheels In 1/25 scale. Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions Matching front wheels are also available. Note the difference between the 1/24 version (left) and the 1/25 version...

Wheel Knock Off Set #1, 1/24-1/25

Three different sets of wheel knock off 'spinners'. Includes center caps you can paint to match your body color or a generic black. Here's an example of what your wheels would look like.   By Detail Master, 1/24-1/25 scales.

Bridgestone Potenza 225/50-16 Tire Set of 4, 1/24

This is a replica of Bridgestone's Potenza SO2 225/50-16 performance tires. A set of wide, semi-low profile black wall tires. Wheels are not included. The 'V' shaped tire tread detail is very good. Lettering on both sides show, "Bridgestone" and "...

19" Chrome T's Wheels & Tires (2 pair) 1/24-1/25

A set of four deep dish, 5-spoke, chrome wheels with low profile tires.   This is a set of 19" wheels which can be combined with 23" T's for the 'big & little' look.   These wheels look like the new style American Torque...

CL's 23" Wheels & Tires 4-Set 1/24

A set of four chrome wheels with low profile tires. This is a set of 23" wheels which can be combined with 19" CL's for the 'big & little' look. Sidewall and tread width is .45" (29/64")   Like the wheels but don't want low profile tires? ...

Cragar 15" SuperTrick Wheels 4-Set, Spindle 1/25

A highly detailed set of front and rear Cragar Super Trick wheelsThese Cragar's replicate 15" wheels used on 1960s-80s era drag cars.  Crowned centers are present on both front and rear wheels, with double-drilled pattern on rear wheels.Front wheels...

Hubcaps - 'Dog Dish' - Generic 1/25

A set of four polished aluminum hubcaps named after what they look like - dog dish. Real aluminum hubcaps to set off your model whether it's a period correct '50's - '60's, rat rod, custom or stock.   Measures 5/8" diameter. Four aluminum pieces...

Starlite Rear Wheels 1/24

A new custom wheel design by Futurattraction.  These match Futurattraction's front spindle-mount wheels   They are the same 5-point star design and can also use a color-coordinated (front or rear half) paint scheme. Includes: CNC...

Starlite Front Wheels 1/25

A new custom wheel design by Futurattraction.  These are spindle-mount wheels and fit Futurattractions' spindle front strut kit.  They are a simple 5-point star design, but have a significantly thinner "show side" wheel half that...

Billet Specialties Comp7 Front Wheels 1/25

A pair of Billet Specialties COMP7 front wheels.Includes: Outer Rims Inner and Outer Center Inserts Hubs Instructions   Photo of real world Comp7 wheel   Wheel dimensions:Width .200"Outside Diameter .0600"   Matching rear wheels are...

Billet Specialties Comp7 Rear Wheels 1/24

A pair of Billet Specialties COMP7 rear wheels in 1/24 scale.Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions  Wheel dimensions:Width .730"Outside Diameter .730" Note the difference between the 1/24 version (left) and...

Hubcaps - 'Dog Dish' - 60 's Chrysler 1/25

A set of four polished aluminum hubcaps named after what they look like - dog dish. Real aluminum hubcaps to set off your model whether it's a period correct '50's - '60's, rat rod, custom or stock. This style also matches the hubcap found on 1960's...

Drag Slicks 11x30x15 1/25

These Drag Slicks are great for smaller horsepower cars or for earlier drag machines.   The tread width equals 11". Dimensions: Overall Width = .590"Diameter = 1.235"Wheel Opening =.63"Tread Width = .465" These slicks are soft enough to fit...

Cragar 70's P/S 4-Wheel Set 1/25

A set of four Cragar Pro Stock Racing Wheels. The deep rear wheels could be used on a street rod, rat rod or other street machine. These Cragar's were popular in the 70's in Pro Stock class.   Contains 2 pairs of resin wheels, 1/25 scale.  

Drag Special Front Tires 1/25

A Moroso narrow front drag tire with really nice tread detail. Will fit the Revell/Monogram style drag front wheels. This tire is similar to Futurattraction's Front Runner tire, except this one is narrower in overall width and tread width. Here's a...

60s 5-Spoke Rear Drag Wheels 1/25

A pair of 5-spoke deep rear wheels. Popular on gassers, super stock or pro stock cars as well as mean street machines.   One pair of resin wheels by Competition Resins, 1/25 scale.

Drag Racing Tire Decal Sheet 1/25

1/25 scale decal sheet for drag racing slicks.  Includes: Goodyear, white Goodyear, large and small, yellow Eagle, large and small, yellow Hoosier, large and small, white Firestone Drag 500 M&H RaceMaster Enough for several cars...