Shop by Manufacturer

Rack & Pinion Set 1/25

 A complete Rack & Pinion set for your chassis. This fits a chassis that is about 1” wide (outside dimension). Consists of: 3D printed steering rack (0.80" overall length)Two rubber bootsStainless steel tubing.(3" x .022" OD)Photo...

M&H Racemaster 'Pie Crust' Slicks 1/25

M&H Racemaster 'Pie Crust' Drag Slicks, black wall. Raised 'M&H Racemaster' lettering on one sidewall. Letters are slightly raised.Fairly soft rubber cast tires. Tire Measurements: Diameter = 1.18"Overall Width = .46"Tread Width = .37Wheel...

Detailing Wire .0075", Black

Small black wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: WhiteRedLight BlueDark BlueYellowOrange   One package of wire .0075" x 3', by Detail...

Large Tapered Pro Stock Wing 1/25

This wing is fairly large and is straighter along the rear edge than along the front edge. End plates are tapered toward the rear and extend down from the top edge. Measurements: Overall length: 2.15" (at the widest, front, edge) Width at end plates: 1...

66 Pro Street Nova 1/25

FEATURES Molded in blue and clearChrome and black vinyl tiresTubbed chassisWide slicksHi--rise manifoldHood scoopDecalsIllustrated instructions Includes displayable engine stand and engine block New in unwrapped box. AUTOMATICALLY...

Battery Cables with Terminals, Pre-Made 1/25

Every car has battery cables and this will really add detail to your engine bay. Long black and red leads with realistic 3D-printed terminals. Also includes photo etched battery hold-down brackets, one of which is to be folded to 90degrees. Available...

67 Chevelle Pro Street 1/25

1967 Chevy Chevelle Pro Street This kit features interior with textured seats, molded gas tank, full suspension and shocks, detailed engine, detailed steering wheel and dashboard, and accurate body details. The rear tire choice is my favorite. ...

B&M Pro Shifter Kit (pair) 1/25

A pair of realistic looking B&M shifters. Check out the assembly instructions here.  I can also include a copy of the instructions in your order - just note it at checkout. Photo etched, 1/25 scale, by Futurattraction  

Challenger '08 - '10 Hood 1/25

A 2008-2010 Challenger hood in the 70's Shaker Hood style.   Contains 1 resin hood, 1/25 scale

Blower Restraint Straps & Harness/Seat Belt Material 1/25

A material that has multiple uses. Use this material for blower restraint straps or seat belts and racing harness belts.  It has the satin fabric texture needed for realism. The harness buckle set shown for reference only in the above photo is Pro...

Pro Mod / FC Slicks 1/16

If you're looking for the biggest meat to stick under those wheel tubbs, you just found it.  These are the largest 1/16 slicks on the market. There are no raised letters on these slicks.  If you want Good Year, Hoosier or M/T names on the...

Barry Grant DEMON 4bbl Carburetor 1/25

Detailed Barry Grant 4-bbl Carburetor.With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING).Photo shows a real Demon carb for reference only. Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the...

Filler / Gas Cap (Hinged Style) 1/25

Here's a pair of gas, oil or other filler caps for your cars. This is the type that has a hinge on one side. Diameter = .17", 11/64" Cast in one piece. Contains 2 metal cast pieces, by Pro Tech 1/25 scale.

Blown Engine Fuel Injection Block 1/16

Fuel Injection Block for supercharged engines. This is the fuel block that is located behind the injector hat and behind the blower which feeds the manifold. Use Pro Tech?s .035 Braided Line along with the corresponding fittings for the fuel feed line to...

Spark Plug Boots Black 1/16

Rubber boots ready to use as is, for straight boots, or cut them and glue at a 90 degree angle for angled boots.Use in combination with your choice of color Pro Tech Spark Plug Wire.Each pack contains 8 black boots, by Pro Tech.

671 GMC Blower 1/16

A 671 blower for early dragsters or for a street machine.Blower pulley is attached to the front plate.The detail is quite good and the bolts are sharp. Check out this photo for an idea of which blower you need. Contains 2 resin pieces.

Throttle Return Spring, 1/16

A small spring to simulate a throttle return spring. This is a pretty tight spring which would have the throttle in a closed position. Made of stainless steel and measures .07" OD x .25" long. Contains a loop on one end and can be cut to length...

Pro Mag 44, Ignition & Electrical Diagrams

Nothing brings a drag racing model engine to its realism potential more than wiring. You will glance over an empty engine, but you will do a double-take when it is detailed with wiring and plumbed with fuel and injection lines. Here is a FREE...

Engine, Under the Hood, Interior Decal Sheet, 1/25

This decal sheet has something for every muscle car, sports car, stocker and more . I included a few close up views of some of the included decals for reference.   Here is just a sampling of what's included. Air filter, valve cover and logo...

Holley Dominator Carburetor (Pair) 1/25

A pair of nicely detailed Holly Dominator 4-bbl Carburetors. With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING). Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the SMALL or LARGE 'T' fitting...

Steering Wheel 1/25

Sport Steering Wheel kit. The wheel grip is mastered in 3D and will be sold as either 3D printed or resin, depending on availability. Three-spoke wheel center is photo etched and replicates Grant Performance #673.   Photo of real Grant 673 steering...

Cragar 15" SuperTrick Wheels 4-Set, Hub 1/24

A highly detailed set of front and rear Cragar Super Trick wheelsThese Cragar's replicate 15" wheels used on 1970s-80s era drag cars.  Crowned centers are present on both front and rear wheels, with double-drilled pattern on rear wheels. Inner and...

Wheelie Bar Single X Frame, 1/25

Lower Wheelie Bar Frame - Single X Design. This is the frame only and does not include the Wheelie Bar Housing Kit or mounting/structural means. Building wheelie bars in 1/25th scale is challenging.  It can be difficult to get longitudinal tubing...

CL's 19" Wheels & Tires 4-Set 1/24

A set of four chrome wheels with low profile tires. Sidewall and tread width is .45" (29/64") Like the wheels but don't want low profile tires?  Take these tires off and replace with other tires. All four wheels/tires are the same size (not big and...

Fuel Line (solid core) 1/25

This line can be used for fuel, oil, water or other transfer hoses.It has a solid copper core to hold its shape.Use hex fittings sized at .025".Each package contains one coil .024" x 3', color black, by Pro Tech.

M&H Racemaster Drag Slicks 1/16

M&H Racemaster Drag Slicks. Raised 'M&H Racemaster' on sidewall. These are a hard resin and do not have a lot of room for play with wheel sizes. Tire Measurements: Width 1.00",  25.4mmDiameter. 2.00", 50.8mmWheel opening 1...

5-Spoke 15" Wheel 4-Set, 1/24

A set of four 5-spoke 15" wheels and tires in a big 'n little configuration. The Yokohama soft tires come off easily so you can use your own. See the wheel dimensions below. Front tires have ADVAN HR-R in raised letters on sidewall along with 235/40VR...

Spoiler Wing 1/25

A nicely made photo etched rear spoiler wing. Mount this on the top of a semi truck cab, the back of a street machine or on a race car. DIMENSIONS: Width = 2-3/16" WideDepth = 5/8"Height = 7/16" Assembly required.  Photo etched sheet, by...

Havoline #28 NASCAR Thunderbird, Ernie Ivan 1/24

Ernie Ivan's #28 Havoline NASCAR. The body lifts off to reveal the NASCAR interior. The hood opens to show the engine. Box is unopened, sealed and new. One corner of box has slight dent (see photo above). Molded in white. Assembly required. By...

Dragster Wire Wheels 20" 1/25

Finally, a wire wheel with real spokes that looks realistic and equal to a 20" wheel. Fully assembled and includes 3D-printed tires painted Tamiya TS-82 "Rubber Black". Featuring small hubs and thin-walled rims for a proportional appearance. The...

Team Winston Jimmy Spencer #23 NASCAR 1/24

Perfectly pristine throughout. A truly detailed NASCAR showpiece to display proudly. Winston is the primary sponsor and cigarettes can't be advertised in racing segments any longer.   Ultra detailed interior and exterior with all decals...

Jeff Burton 50th NASCAR Anniversary #99 Taurus 1/24

Exide Batteries' #99 Taurus driven by Jeff Burton, including a Commemorative 50th Anniversary badge. The body lifts off to reveal the NASCAR interior. The hood opens to show the engine. Box is unopened, sealed and new. Molded in white. Assembly...

Aluminum Coils 4-Set, 1/25

A set of 4 turned aluminum ignition coils. Includes a small sheet of self adhesive aluminum which is to be cut into strips and used to mount the coils as straps. Consists of: Aluminum  Coil Boot Material Aluminum Mounting Sheet Instructions...

Ignition or General Wire, Dark Blue .014"

This dark blue wire can be used for any electrical need. Scale Motorsport's wire is not as stiff as most other electrical wires. It is .014" diameter which is equal in real life to 5/16" or 9mm at 1/25 scale. At 1/16 scale, this wire would be equal to...

Ignition or General Wire, White .014"

This white wire can be used for any electrical need. Scale Motorsport's wire is not as stiff as most other electrical wires. It is .014" diameter which is equal in real life to 5/16" or 9mm at 1/25 scale. At 1/16 scale, this wire would be equal to...

Zebra Animal Hide Pattern Decal, 1/24

Scale Motorsport is known for their quality carbon fiber decals and this one is different. A zebra pattern for a rat rod, custom or maybe hang it on a diorama wall. Perfect for a different upholstery in any car.   One decal sheet by Scale...