1/25 - 1/24 Scale

Chevy 1966 Pickup Detail Kit 1/25

A detail set for Revell's 1966 Chevy Pickup Truck.  Includes: Cab trim pieces behind the door C10 logo Steering wheel horn ring Rear tail lights Keys     Here's a kit that you may like.   Photo etched sheet, by...

Windshield Wipers, 4 Pairs 1/25

This windshield wiper set is typical for cars from the '40's to today. The older cars have them exposed and left as stainless steel, while the newer cars have the wiper blades hidden below the hood and are normally black. Includes 4 sets of blades with...

Large Tool Box, 1/25

A large tool box to hold the small tool box by Highlight Model Studio.  As is, it has a stainless steel or shiny aluminum appearance. Actually can be made to open or build it in an open or closed position. Has a diamond pattern for the top and...

Tool Set, 1/25

This photo etched sheet contains detailed tools you need for a fantastic show display (with the trunk open) or a diorama. Contains: 14 - Open-end wrenches, various sizes 1   - Open-end wrench carrier 1   - Hacksaw 1 ...

MOONEYES Foot Pedal Set, 1/25

This is what you need for the early gasser or digger and also perfect for rat rods and hot rods. Set  includes a total of 17 pedals. See the photo above for the different sizes and styles. Photo etched and assembly is required.   Photo...

Steering Wheel 5-Set #2, 1/25

A set of 5 different steering wheels for that hot rod, rat rod or other project. Contains 5  3-Spoke steering wheels 5  Horn buttons Bend each spoke out from the hub to make the steering wheel as deep as needed. Requires an o-ring for...

Steering Wheel 5-Set #1, 1/25

A set of 5 different steering wheels for that hot rod, rat rod or other project. Contains 3  3-Spoke steering wheels 2  4-Spoke steering wheels 6  Horn buttons Bend each spoke out from the hub to make the steering wheel as deep as...

Ford 9" Rear End 1/25

A stock Ford 9" rear end for that street rod, hot rod or rat rod.     Contains 1 resin piece, 1/25 scale

Engine Detailing Kit Plus #1, 1/25

An engine wiring and plumbing kit Consists of: Radiator hose, black Heater hose, black Black detailing wire (battery, ignition, etc) Red detailing wire (battery, ignition, etc) Two sizes of aluminum line  By Parts by Parks, 1/25 scale.

Pedals - Drag, Rat Rod, Hot Rod 1/25

A set of pedals, perfect for dragster, gasser, hot rod, rat rod or other project car. Nine sets of pedals are included. Each set has accelerator, brake and clutch pedals. Photo etched and assembly is required.   Photo etched sheet, by Highlight...

Gasser Miscellaneous Decal Sheet #3, 1/25

Gasser 1/25 scale mini decal sheet. This sheet doesn't have real world sponsors, but has colorful names and racing flags.   One mini sheet. by SLIXX Decals, 1/25 scale.

S&S Gasser Decal Sheet #3 1/25

Gasser style drag racing contingency decal sheet. Includes sponsors like Hurst (large and small), Valvoline, Drag News, Crower and Isky. Also includes gasser class designations like A/G, B/G and C/G along with numbers. Some of the decals would look...

Belt Material - Serpentine, V-Belt, Accessory 1/25

This rubber, stretchable belt material can be used for many purposes. The 3" long strip is ribbed lengthwise and can be separated for the width you need.  Simply cut the length desired and glue it at the underside of the crank or other pulley...

Windshield Clips 1/24-1/25

A photo-etched plate of miscellaneous clips to hold the windshield and side windows. Attach these to a frame that is shaped to the door opening/window shape and the glass attaches to them. They can be painted  or left bare for that aluminum look...

Soft Clear Line Hose .032", .8mm

This is a soft clear tubing that is easily configured to the space you have. It's able to bend at a fairly sharp angle without collapsing.   For fittings, see Hex Fittings or Size I Ferrules sized at .080 for this clear line. This soft line...

Soft Clear Line Hose .028", .7mm

This is a soft clear line and easily configured to the space you have. It's able to bend at a fairly sharp angle without collapsing. It will drape like an actual line.  Depending on your scale, it's excellent for carb fuel lines, radiator overflow...

Chain Link License Plate Frames 1/25

A set of 8 license plate frames with chain links surrounding the plate area. In the center of the license plate area are 3 keys.  They're really small and easy to lose. Enough for at several cars. Photo etched in nickel silver.   By Model Car...

Custom Billet Wings - 'Valdez GT', 1/25

Part of the Model Car Garage 'Tuner Series' is this set of 'Valdez GT' wings. A photo etched plate consisting of: 2 horizontal wings 2 wing ends Supports. Instructions The included instructions show the same wing drawing for 3 different wings in this...

Custom Billet Wings - Slick Shooter, 1/25

Part of the Model Car Garage 'Tuner Series' is this set of 'Slick Shooter' wings. A photo etched plate consisting of: 2 horizontal wings 2 wing ends Supports. Instructions The included instructions show the same wing drawing for 3 different wings in...

Custom Billet Wings - Wingbat GT, 1/25

Part of the Model Car Garage 'Tuner Series' is this set of 'Wingbat GT' wings. A photo etched plate consisting of: 2 horizontal wings 2 wing ends Supports. Instructions Length of both wings is 2-1/8" Support height is .45" The instructions state that...

Megaphone Exhaust Tips ,1/25

A pair of aluminum exhaust tips with an angled flared end. This is hollow and looks realistic. Dimensions: Inlet Diameter: 1/8" Outlet Diameter: 3/16" (flared end) For 2-1/2" exhaust pipes to match, use .112 aluminum hard line. This is almost the same OD...

Salt Lake Style Moon Wheel Covers 15" 1/25

A set of four spun aluminum large Moon hubcaps. These are found on early custom cars and often found on Salt Lake racers. This is made of solid aluminum and has a flat back. Measures 5/8" diameter or a scale 15". Four aluminum pieces by Parts by Parks,...

Salt Lake Style Moon Wheel Covers 16" 1/25

A set of four spun aluminum large Moon hubcaps. These are found on early custom cars and often found on Salt Lake racers. This is made of solid aluminum and has a flat back. Measures 11/16" diameter or a scale 16". Four aluminum pieces by Parts by Parks,...

Pulley Set #6 Polished 1/25

A set of four polished aluminum V-groove pulleys with belt material. The face of the this pulley set is smooth and slightly cone shaped where the center is pointed outward, except for the crank pulley. Consists of four single groove pulleys: Crank...

BBC Milodon Valve Covers 1/25

Tall Milodon valve covers with MILODON spelled out. These valve covers have horizontal grooves running lengthwise. Contains 2 resin pieces.

BBC M/T Valve Covers 1/25

A pair of BBC or HEMI valve covers with a filler cap on the end of each one. Contains 2 resin pieces.

Altered or Small Wing 1/25

A small wing for any use, but a fuel altered is an example. Has teardrop end plates. Measurements: Length: 1" Width: .62" Contains 1 resin piece, 1/25 scale

Top Fuel Wheel Set 1/25

A set of four Racing Wheels for a TF dragster - front and rear. Features a thin front wheel with a deep rim in order to make sure the timing lights are tripped at the end of the quarter mile. The 2-piece front wheel will accept the 'bicycle tire' found...

Fenton/Anson Front Wheels 1/25

A pair of 5-slot Fenton (or Anson) front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Gasser Front Wheels, but these have larger slots  OD = .67", 17mm Overall Width = .19", 5mm   The wheels that will...

Einstein Blower Hat and Base 1/25

Here's a different blower hat.  It's similar to the Janis style. Includes a plate with an injector distribution block. Overall height is 1.00". Three pieces in resin   By Competition Resins, 1/25 scale.    

S.C.O.T Blower 1/25

Here's a special blower for that Flathead engine. S.Co.T. is an abbreviation for 'Supercharger Company of Turin' (Torino), Italy. It was one of the most popular "roots" style blowers in the 1950's and popular today on Street Rods and Rat Rods...

GM TH350 3-Speed Transmission 1/25

A nicely detailed General Motors 350 Turbo Hydromatic transmission. Molded in one piece with bellhousing. By Competition Resins, 1/25 scale

Pirelli Type Small Front Racing Tires 1/25

These front tires will work for a Gasser as well as a Pro Mod or street racer. These are slightly smaller than the Futurattraction Front Runner tires. These are semi hard tires but still flexible. Measurements:Outside Diameter = .98"Overall width = ...

Good Year Dragster Slicks 1/25

These are labeled '60's Goodyear Dragster Slicks but depending on the size you want, these will work for any racer. "Good Year" is in raised letters on both sides. These are slightly smaller than the Comp Resins' Pro Stock slicks. These are fairly...

American Trak Star Front Wheels 1/25

American Racing TrakStar Front Wheels  This is 5-bolt mounted, not spindle mounted. Brand new and I only have a limited quantity to start with. These American Racing front wheels match the Trak Star rear wheels.   Here's a  photo of...

American Trak Star Rear Wheels 1/24

American Racing TrakStar Rear Wheels in 1/24 scale   Brand new and I only have a limited quantity to start with. These American Racing rear wheels match the Trak Star front wheels. Here's a  photo of the real wheel with a beadlock ring...