Engine Detailing

Chevy 409 5-Pulley Set, 2-Grooves, 1/25

A set of five spun aluminum V-groove pulleys, whether for a 409 or any other engine.. Consists of: 1 Double groove crank pulley 1 Double groove water pump pulley 1 Large single groove accessory pulley 2 Small single groove accessory pulley Belt...

Injector Stacks - Small 1/24-1/25

Smaller, polished aluminum injector stacks for a Hilborn style induction system. Pack contains 8 stacks, polished aluminum with a flared top. . The stacks are hollow with a 'pin' at the bottom for easy mounting Dimensions per back of...

Black Battery Cables and Hardware Set, 1/25

Here's a complete battery cable set. Includes black wire plus a photo etched plate with battery terminals, hold down straps, aluminum rod for the terminal posts and more. The solid core will hold its shape when formed into place. Each package...

Detailing Wire .0075", Orange

Small orange wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueDark Blue One package of wire .0075" x 3', by Detail Master

Velocity Stacks, Small, 4bbl Carb 1/24-1/25

Smaller, polished aluminum velocity stacks for a 4bbl carburetor. Pack contains 2 stacks, turned solid aluminum, so there's no seam. The stack is hollowed-out, leaving a solid bottom.  You could drill it out so that you'd be able to see the carb...

Ignition Wire, Gray, .022"

Small solid core gray wire for ignition components as well as any wiring needs. Wire diameter is .022"   One roll, 2' long, by Detail Master.

Detailing Wire .0075", Red

Small red wire can be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteLight BlueDark BlueYellow One package of wire .0057" x 3', by Detail Master

Detailing Wire .0075", Light Blue

Small light blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedYellowDark Blue One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", Yellow

Small dark blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueDark Blue One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", Dark Blue

Small dark blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueYellow One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", White

Small white wire can be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackRedLight BlueDark BlueYellow One package of wire .0057" x 3', by Detail Master

Holley Dominator Carb & PE Details, Pair 1/25

Holley Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage.  These carbs were drawn in CAD and capture as many features as possible of Holley's decades-famous Dominator race carb. The carb bodies are 3D-printed and are...

Soft Line - Hose .011", .29mm OD

This is a shiny black nylon line. It is slightly springy and can be bent at sharp anglesThe OD dimension is .008" or .20mm.  This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 9/32"1/16 scale = 1/12 scale =1/8...

Soft Line - Hose .005", .12mm OD

This is the smallest black soft line I have. This is a shiny black nylon line. It is slightly springy and can be bent at sharp anglesThe OD dimension is .0047" or .14mm.  Typical uses are small oil lines, vacuum and fuel lines, especially fuel...

SBC Gasket Set, 1/24-1/25

Great for a show winning engine or a diarama scene. All the gaskets you'd find on a real engine:HeadIntakeExhaustValve CoversTiming CoverCarburetor (2 styles)Fuel Pump GasketFuel Pump Blank Plate (when using an electric fuel pump)Water Pumpand...

Soft Clear Line - Hose .005", .13mm OD

This is my smallest clear line.  You can barely see it, but if you need a really small clear line, this is it.This could be used for a 1/25 radiator overflow tube, small carburetor fuel lines, or other clear line needed.  This soft line is easy...

Header and Exhaust Flange Set - Large, 1/24-1/25

These Detail Master Flanges can be used for your headers, manifolds and tail pipes. Bolt head included as well! Includes several sizes, shapes and diameters to suit any header diameter.   Photo etched, by Detail Master, 1/24-1/25 scale

8" Diameter Dual Air Cleaners, 1/25

A pair of small air cleaners that will fit a 4bbl carb. It consists of an aluminum top and bottom with screen material.  The top is peaked in the center   Two complete air cleaners, by Detail Master, 1/25 scale.  

Textured Material for Belts, Harness, Restraint and More

This looks like a piece of paper, but it's much more. This is a fine cotton textured paper on one side and when colored with a Sharpie (recommended) the texture is highlighted. It's easily cut to shape with scissors. Use a piece of copy paper as a...

Ignition Wire, Red, .016"

Small solid core red wire for ignition components as well as any wiring needs. Wire diameter is .016"   One roll, 2' long, by Detail Master.

Radiator Shroud Set 1/25

Here is a combination of a resin radiator, shroud and and fan-surround.    Radiator dimensions: Width at the base is 1.06" Depth (front to rear) is .420" The ID at the rear most part of the fan enclosure is .615".   3 resin pieces,...

Spark Plug Wire Loom Set, Modern 1/24-1/25

This is referred to as 'Street Rod' Wire Looms, but the designs and shapes included could be the perfect fit for your engine. Includes four pairs of different styles, plus the typical wire separators for one to four wires. These have a good shine to...

Aluminum Pulley 4-Set, 1 & 2-Grooves, 1/25

A set of four spun aluminum V-groove pulleys. This is packaged as a Flathead pulley set but can be used for most any engine requiring smaller single groove pulleys. Consists of four pulleys in three sizes: Crank pulley (2-grooves) Water pump...

Aluminum Pulley 4-Set, 1-Groove, 1/25

A set of four spun aluminum V-groove pulleys. This is packaged as a Flathead pulley set but can be used for most any engine requiring smaller single groove pulleys. Consists of four single groove pulleys in two sizes: Crank pulley Water pump pulley Fan...

Pro Street License Plate Decal 1/25

A pair of license plate decals with PRO STREET written on the face. These are New Your plates with a red Statue of Liberty on the left side. The lettering is in blue.   Two decals on one sheet, by VCG Resins, 1/25 scale

Soft Line - Red .016", .4mm OD

This is a small, soft, solid, semi-shiny line.  It can bend at a sharp angle without kinking.See Size A1 Ferrules for this soft line. This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 3/8"1/16 scale = 1/4"1/12...

Soft Black Line - Hose .016", .4mm OD

This is a small, soft, solid, semi-shiny line. Can be used for real life 9mm spark plug wires. They would drape like the real thing. It's the perfect size for those small injector lines to the manifold and injector hat. It can bend at a sharp angle...

Soft Clear Line - Hose .008", .2mm OD

This is really small, soft, solid, clear line . You can barely see it, but if you need a really small clear line, this is it.This could be used for a 1/25 radiator overflow tube, small carburetor fuel lines, or other clear line needed.  This soft...

Soft Clear Line - Hose .012", .3mm OD

This is a pretty small soft, solid, clear line . It's the perfect thing for those small fuel lines at the engine.  It can bend at a sharp angle without kinking.See Size A1 Ferrules for this soft line. This soft line equals the following...

Engine Pulley Set, Star Design, 1/25

A different type of pulley set. These are photo etched and the pieces stack to give the pulley depth. You could also cut a piece of round styrene or aluminum rod or tube as a spacer between the pulley faces. Pulley face has a spoke or star pattern plus a...

Engine Pulley Set, Circle Design, 1/25

A different type of pulley set. These are photo etched and the pieces stack to give the pulley depth. You could also cut a piece of round styrene or aluminum rod or tube as a spacer between the pulley faces. Pulley face has 6 round holes plus a hole in...

4-Pulley Set, 1-Groove, Flathead or Other 1/25

A set of four spun aluminum V-groove pulleys. This is packaged as a Flathead pulley set but can be used for most any engine requiring smaller single groove pulleys. Consists of four single groove pulleys: Crank pulley Water pump pulley Fan...

Soft Line - Hose or Cable .031", .8mm OD Dia.

This is a solid soft line that looks like real rubber. It is easily configured to the space you have. It's able to bend at a sharp angle without kinking. At 1/25 scale, use for heater hose, air conditioning hose and more.Makes perfect spark plug cable...

Engine Detailing Kit Plus #1, 1/25

An engine wiring and plumbing kit Consists of: Radiator hose, black Heater hose, black Black detailing wire (battery, ignition, etc) Red detailing wire (battery, ignition, etc) Two sizes of aluminum line  By Parts by Parks, 1/25 scale.

Belt Material - Serpentine, V-Belt, Accessory 1/25

This rubber, stretchable belt material can be used for many purposes. The 3" long strip is ribbed lengthwise and can be separated for the width you need.  Simply cut the length desired and glue it at the underside of the crank or other pulley...

Soft Clear Line Hose .032", .8mm

This is a soft clear tubing that is easily configured to the space you have. It's able to bend at a fairly sharp angle without collapsing.   For fittings, see Hex Fittings or Size I Ferrules sized at .080 for this clear line. This soft line...