1/25 - 1/24 Scale

Pro Mod - Pro Stock D Shaped Opening Hood Scoop 1/25

A raised hood scoop for that PM or PS racer with a 'D' shaped mouth opening. See also similar hood scoops with a Round Opening or Square Mouth Opening.Molded in one piece. Contains 1 resin scoop, 1/25 scale.

Pro Mod - Pro Stock Square Opening Hood Scoop 1/25

A raised hood scoop for that PM or PS racer with a square mouth opening. See also similar hood scoops with a Round Opening or 'D-Shaped Opening. Molded in one piece. Contains 1 resin scoop, 1/25 scale.

Halibrand Front Wheels 1/25

A pair of slotted Halibrand front wheels.     Contains 2 resin wheels 1/25 scale.

MOON 392 HEMI Valve Covers 1/25

A pair of ribbed Moon 392 HEMI valve covers with spark plug holes already drilled. Contains 2 resin pieces.

Coil Over Shock Kit 1/25

Here is a complete, realistic appearing, coil over shock kit, with all of the parts needed to detail your suspension. Kit includes:    3D-printed 2-piece shock bodies Resin lower extensions RB Motion rod ends Nickel-silver...

Front Strut Suspension Kit with Drilled Rotors 1/25

Here is a complete front strut kit, with all of the parts needed for a detailed front suspension. This is a static suspension and not functional. This set is for 5-bolt hub mounted wheels. Kit includes (28 pieces): 3D-printed strut bodies/spindles...

Small Block Engine Crank Trigger 1/25

Here is a Crank Trigger kit, for a small block engine and especially for the small block Chevy. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a...

Big Block Engine, Crank Trigger 1/25

Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a distributor triggered system. A crank triggered system can often make more power and produce more...

3-Hole Carbon Fiber Hat 1/25

A 3-Hole compact Injector Hat.Molded in one piece. Contains 1 resin hat.

Soft Line - Hose .118", 3mm OD

This a soft, solid rubber line that is easily configured to the space you have. It's able to bend at a sharp angle without kinking. This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 3"1/16 scale = 1 7/8"1/12 scale = 1...

Soft Line Hose .098, 2.5mm OD & Roll Bar Padding in 1/25

This a soft rubber tubing (hollow) that is easily configured to the space you have. It's able to bend at a fairly sharp angle without collapsing.  The hollow ends make it easy to attach to objects with a placement of a pin or stud they may already...

Soft Line - Hose .059", 1.5mm OD Dia.

This a soft solid rubber-like soft line with a slight texture and slight shine to it. It is easily configured to the space you have. It's able to bend at a sharp angle without kinking.This soft line equals the following equivalent 1:1 size at each scale...

Soft Line - Hose or Cable .039", 1mm OD

This is a soft, solid rubber line that bends easily and smoothly.  It's able to bend at a sharp angle without kinking. This makes perfect spark plug cable for 1/12 scale.  It drapes natually and looks proportional to the larger engine...

Radiator Flex Fan, 15" Dia 1/25

Add another element of detail to your engine bay.A pair of 15" diameter Flex Fans.      Contains 2 photoetched fans per package in 1/25 scale, by Pro Tech.

Aluminum Ignition Coil 1/25

Machined aluminum ignition coil with rubber boot.Use with your color choice of Pro Tech Spark Plug Cable. Coil shown with Pro Tech's distributor kit, flex fan, spark plug wires, spark plug boots, oil breathers and Demon carburetors. By Pro Tech.

Distributor Kit 1/25

Machined aluminum 1-piece distributor body and shaft with resin cap and boot material. The cap has 'starter' holes to drill out to insert your spark plug wires. Refer to the photo showing a completed distributor. Assembly and painting are not included...

Tee Fitting, Large

This is a large inline fitting for braided lines, hard lines or hoses.  Anywhere you have a split.Typical uses are dual feed carburetors, tunnel ram, oil lines and brake lines.Use Pro Tech .035 Braided Line and matching Fittings. Each package...

Tee Fitting, Small

This is an inline fitting for braided lines, hard lines or hoses.Typical uses are splits for carburetor fuel lines and brake lines.Use Pro Tech .025 Braided Line and matching Fittings. Each package contains one T fitting, by Pro Tech. Metal Cast

Fuel Junction Block 1/25

For your single or dual carburetor setups where the fuel lines split.  Made with molded-on fittings.Use .025 Braided Lines and Fittings. You can also add a small T fitting.                    ...

Street Rod Gauges Set #2, Black 1/25

Enough photoetched trims with BLACK gauge faces for four cars. This will add detail to your interior.These gauges are popular in '30 - '34 Street Rods and Roadsters with flat dash boards. They are typically mounted in the center of the dash or over...

Under-Dash Gauges, Black 1/25

Enough photoetched trims and black gauge faces for several cars. This will add detail to your interior.These gauges were popular in the '60s like those made my Stewart Warner and others. They can be mounted under the dash or on the hood of the car, just...

Dual Remote Oil Filter 1/25

A pair of cast metal oil filters and a base to mount them. Contains 3 metal cast pieces, by Pro Tech.  

Oil Breathers (Open Element) 1/25

A pair of machined aluminum oil breathers with filter element material.Contains 2 machined aluminum round breathers per pack, by Pro Tech.

Oil Breathers 1/25

A pair of machined aluminum oil breathers to mount on your valve covers. Contains 2 machined aluminum round breathers per pack, by Pro Tech.

Throttle Linkage Photo Etched 1/25

Photoetched pieces to detail your throttle linkage.Can also use some of the pieces for parallel spring shackles, brackets and other linkages. By Pro Tech.

Round 9" Aluminum (Edelbrock Style) Air Cleaner 1/25

This machined aluminum air cleaner measures 9"w x 2"h. It would be typically be found on a single carburetor. Modeled after an Edelbrock air cleaner.Includes photoetched wing nut and simulated filter element. This photo shows a 14" air cleaner with an...

MSD 7 Ignition Box 1/25

Each package contains 1 MSD 7 ignition box. See 'Detailing Wire' to enhance this item, by Pro Tech.Resin, by Pro Tech, 1/25 scale.

MSD 6 Ignition Box 1/25

Each package contains 1 MSD 6 ignition box. The casting of this box shows the ribs and area for the MSD logo. The photo shows two MSD boxes with MSD labels copied from an automotive magazine and reduced. These are not included with the MSD 6...

Mallory/MSD Ignition Coil 1/25

Modeled after a Mallory Ignition Coil.  Also looks very similar to a MSD Ignition Coil.Photo of completed coil is for reference only. Paint, wires and decals are not included.   Each package contains 1 coil, by Pro Tech...

Holley Dominator 4bbl Carburetor 1/25

Detailed Holly Dominator 4-bbl Carburetor. With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING). Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the SMALL or LARGE 'T' fitting. One per package...

Dzus Fasteners 1/25

These quarter-turn Dzus fasteners are used primarily to hold down body sections.They're individually mounted on a soft rubber backing, so no cutting is required (and no lost parts).There are enough fasteners here for a couple of cars.One set metal-cast,...

5-Point Racing Harness 1/25

Pro Tech's 5-Point Racing Harness with photoetched buckles and ready to use harness material.                               Pro Tech's own design makes it easy to assemble,...

License Plate Frame Set 1/25

Photoetched scale state license plate frames for added realism.   Also, see the state license plates and performance license plates.   One set of 8 photoetched license plate frames, by Pro Tech.

Performance License Plate Set 1/25

Performance license plates for added realism.   Plates included are:   Chevrolet USA-1 Chrysler Dodge Ford Motorsports Ford Lincoln Mercury Mercury Mopar Mustang Plymouth Today's Chevrolet   Also, see the other state license plates along...

Detailing Wire .007"

Very small wire to be used for ignition wiring, computer connections, gauges, etc.Available in the following colors:BlackRedBlueYellowOne package of wire .007" x 3', by Pro Tech.

Heater Hose 1/25

This copper core wire is used as a small heater hose or other transfer hose. The copper core will hold its shape when formed into place.  Cut the outer skin back, at the ends, just enough to leave a stub to insert into a drilled hole.Use hex...