Teds Modeling

Black Coated Hard Line .098", 2.5mm Dia

Here is a glossy black hard line that holds its shape and doesn't kink at tight angles. This is has a solid copper core that makes it pretty stiff. This hard line equals the following equivalent 1:1 size at each scale. 1/25 scale = 2 1/2" 1/16...

P/M-P/S '67 Chevelle Tubular Chassis, 1/25

A complete one-piece 3D-resin-printed chassis to fit the popular AMT 1967 Chevelle Pro Street kit (#876). Convert that AMT Pro Street kit into a Pro Stock or Pro Mod. If you don't have the kit but want to build a PS/PM car, I have a few Chevelle bodies...

P/M-P/S '70.5 Camaro Tubular Chassis 4-1/2" Wheelbase, 1/25

A complete one-piece 3D-resin-printed chassis. This was designed to a '70.5 Pro Mod Camaro, but the body is no longer being made. This particular chassis has a long nose, forward sloping roof, firewall and wheel tubbs with an extended lower platform. It...

DART BBC Tunnel Ram Dry-Sump Engine 1/25

A 3D-printed Dry Sump BBC engine based on a DART Billet engine. Oil pan and external oil pump are pre-drilled for hoses/fittings. Strip end off Braided Line and insert core into hole.Harmonic Balancer and oil pump will accept 1mm diameter pulley shafts...

Soft Clear Line - Tube .039, 1mm OD, .020" ID

This is a soft, clear line that bends easily and smoothly.  It's able to bend at a sharp angle without kinking. It is a hollow tube with a .020" ID.See .040" Hex Fittings or Size C (or Size D for more space) Ferrules for hose ends.This clear line...

Aluminum 'Hard' Line .035" Dia

Depending on your scale, typical uses are fuel and oil lines, small heater and coolant line and other small transfer lines. This is a soft solid aluminum line that is easy to bend and will hold the shape made. The scale size is determined by its outside...

Aluminum Hard Line .118", 3mm OD

This is a solid aluminum line that can be configured to the space you have. It's able to bend at a sharp angle without kinking. This is a large diameter line and although it's pliable, it requires a tool or object to bend it around if you want sharp...

P/M Tubular Full Chassis, Long Nose, 1/25

A complete one-piece 3D-resin-printed chassis. This was designed to fit Competition Resin's 1953 Corvette Pro Mod body, but the body is no longer being made. It may fit your needs too (see dimensions below). This chassis is for bodies...

1967 Chevelle SS Pro Street Body - AMT, 1/25

This is the body from AMT's '67 Chevelle Pro Street kit. It fits this one-piece PM/PS chassis (found here), but maybe you need a replacement body for the AMT kit. Includes: Body Hood Front and rear fenders/grille Front and rear glass Chrome trim and...

Aluminum 'Hard' Line .039, 1mm OD

This is a soft aluminum line that bends easily and smoothly.  It's able to bend at a sharp angle without kinking. It is bright and can be polished.Search for Hex Fittings or Ferrules for hose ends.This hard line equals the following equivalent 1:1...

Michelin XGT-ZR Tires 4-Set, 1/25

A set of four Michelin XGT-ZR high-performance tires. Lettering on the sidewalls: MichelinXGT-ZP 275/40 ZR-17 and P 335/85 ZR-17Rotation Direction (with arrow) Front Tires: OD =  1.04"Tire width = .46"Wheel opening = .60"Sidewall = .21" Rear...

Michelin XGT-Z Tires, 4-Set, 1/25

A set of four Michelin XGT-Z low-profile tires - all the same size. Lettering on the sidewalls:MichelinXGT-Z275/40-17 and 335/37-17 Front Tires: OD =  1.0"Tire width = .46"Wheel opening = .65"Sidewall = .15" Rear Tires: OD =  1.02"Tire...