Shop by Manufacturer

Vertex Magneto, Aluminum, Pre-Wired 1/25

A machined aluminum Vertex magneto for those early racing engines.The color in the item photo does not reflect the actual color.  Select your choice from the color swatches.Choose your color of spark plug wire...

Pre-Wired Distributor 1/25

Here's a machined aluminum distributor body with your color choice of spark plug wire already installed.Drill a hole in your block and insert this distributor. Route the wires to the spark plugs and don't forget the Pro Tech Spark Plug Boots, for even...

Nostalgia Drag Racing Contingency Decal Sheet #3 1/25

Nostaglia style Drag Racing Contingency decal sheet.Includes many sponsors' and manufacturers' names from the past Crower, Gumout, Pennzoil, Howard's Cams, VHT, Accel, Holley and many more.One decal sheet by SLIXX Decals, 1/25 scale.

Fuel Cell Set 1/25

A pair of 3D-printed fuel cells with photo etched ring and strap material. Includes:Two 3D-printed fuel cellsPhoto etch rings and latch detailThe fuel cells have recesses for the PE detail to seat correctly 3D-printed and photo etched, 1/25 scale...

Front Runner Tires 1/25

Front drag tire patterned after Goodyear Frontrunner style. Designed to be direct fit for R/M style drag front wheels. Dimensions: 1" OD.65" (21/32")  ID.25" wide Click here for a free downloadable sizing and fitment table for tires and wheels...

Ferrule Fittings for Braided, Soft, Hard LInes -Brass

Perfect for simulating crimp-type end-of-line fittings on Blower injector lines, Injector Hat injector lines or carb fittings. Can also be used as carburetor 'boosters'.  The photo above shows injector lines using Size A ferrules and .020"...

Gauges, Hood Pins, Dzus Fasteners & Brake Calipers Decal Sheet 1/25

Here is a small sheet of decals with digital and analog gauges, hood pins & Dzus fasteners and labels for brake calipers. There are enough decals on this sheet for a few cars. The product photo shown is a representation and may not look exactly...

Soft Line - Hose .020", .5mm OD

This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 1/2"1/16 scale = 1/4" or 5/16"1/12 scale =1/4"1/8 scale  = 1/8"Typical uses are small oil, vacuum and fuel lines, especially fuel & nitrous delivery at the the...

Spark Plug Wire Looms, Photoetched 1/25

These wire looms will keep your spark plug wires separated. This will give you an organized look and it makes it easier to form your wires where you want them.  Used on all drag cars or street vehicles.There are enough wire looms here for many cars...

Parachute Kit 1/25

This is the ultimate in a 1/25 scale drag chute - Contains an inner resin parachute core with an outer textured material to simulate the actual parachute jacket material.  Don't rely on flat black paint anymore. Color the material any color you want...

Spark Plug or Large Detailing Wire 1/25

Choose a color for your spark plug wires.This can also be used for large detailing wire, if the other Pro Tech wire choices aren't large enough.Available colors:BlackRedBlueYellowOrangeGrayOne length of wire .018" x 3', by Pro Tech.Specify color.

Aero II Pro Stock Hood Scoop, 1/25

A Rectangular Opening Pro Stock Hood Scoop. It's designed to rest against the windshield and may have to be adjusted to fit your windshield angle. See also a longer version of this hood scoop here. Molded in one piece. Contains 1 resin scoop, 1/25...

Molded Blower Belt with Pulleys 1/25

A more detailed blower belt set than found in kits. The belt shows cogs on the inside and bolt heads are found on the pulleys. Also has the blower pulley, crank pulley and idler pulley molded in..   Blower pulley to Crank pulley center-to-center...

Drag Slicks,17x36x16 1/25

These Drag Slicks equal a scale 17x36-16 tire.  This is representative of a current Pro Mod, FC or TF drag slick. Dimensions:Overall Width = .85"Diameter = 1.46"Tread Width = .70"Wheel Opening =.715" The tire ID is designed to work with earlier...

Spark Plug Boots - Colors 1/25

Boots for spark pugs or other electrical wiring in 4 colors.Use in combination with your choice of Pro Tech Spark Plug Wire. Each pack contains 8 boots, 1/25 scale, by Teds Modeling. CHOOSE COLOR

Spark Plug Boots Black 1/25

Rubber boots ready to use as is, for straight boots, or cut them and glue at a 90 degree angle for angled boots.Use in combination with your choice of color Pro Tech Spark Plug Wire.Each pack contains 8 black boots, by Pro Tech.

Battery (pair) 1/25

A pair resin batteries to add detail for the trunk or the engine bay. Dress them up with manufacturer's decals found here and battery connectors here.   For multiple battery connections in Parallel or Series, look here.     Contains 2...

Tire Valve Stems 1/25

Add another element of detail to your wheels.A set of machined aluminum tire valve stems. Photo of Tire Valve Stems with .025 Hex Fittings for the lug nuts. Use .025 Evergreen rod for the studs. See the How-To article on detailing wheels:...

Supercharger Pulley Set 1/25

Three cast-metal pulleys and blower belt materail   3-pieces cast-metal and blower belt material by Pro Tech.

Racing Seat Belt, Harness, Hardware, Red Belt Material 1/25

Photo etched lap and harness seat belt hardware with red, textured belt material. One package will make 2 sets. Includes photo-etched buckles, harness material and directions.   By Gofer Racing, 1/24-1/25 scales.

BBC Tall Valve Covers 1/25

A pair of BBC flat top valve covers that are taller than normal. These will help make your engine look bigger, too. Contains 2 resin pieces.

Rat Rod & Misc Graphics Decal Sheet #2, 1/25

1/25 scale mini decal sheet with graphics. Includes (2 of each)  Pinup Girls Skulls "Midnight Auto Salvage" "Deuces High" Big Kahuna on a surfboard "Undertaker Recovery" Bumble Bees and more One mini sheet. by SLIXX Decals, 1/25 scale.

NoS or Fire Aluminum 2-Bottle Set with Upright Holder 1/25

You won't find a more realistic upright nitrous oxide bottle set than this one.  Use one as a fire bottle if you have a plumbed fire suppression system. These 10 lb bottles are made for an upright position... Includes: CNC'd aluminum bottles ...

Dana - Narrowed Rear End & Brake Kit 1/25

Here is a complete Dana narrowed rear end with brakes. Overall with between axle tube ends is 1-7/8" Kit includes: Narrowed housing Rear cover Housing ends including one spare Resin brake hats Resin calipers PE drilled rotors PE...

Hex Braided Line Fittings .080

These hex fittings are compatible with the .080 diameter Braided Line and .078 aluminum hard line.   Make your own AN fittings using Pro Tech's aluminum Hex Fittings.For a realistic anodized appearance on these aluminum fitting, use Duplicolor...

Hex Braided Line Fittings .035

These hex fittings are compatible with the .035 diameter Braided Line and our .034 and .031 aluminum 'hard' lines found in 'Hard & Soft Lines'.   Make your own AN fittings using Pro Tech's aluminum Hex Fittings. For a realistic anodized...

Drag Racing Parachute 1/25

A drag chute made of resin.Contains 1 chute, by Pro Tech.Resin

Aluminum Ignition Coil 1/16

Machined aluminum ignition coil with rubber boot.Use with your color choice of Pro Tech Spark Plug Cable.

Distributor Kit 1/16

Resin distributor, shaft and boot material. The cap has 'starter' holes to drill out and insert the spark plug boot which is cut from the included material. Refer to the photo showing a completed distributor. Assembly and painting are not included...

Interior Door & Window Crank Set 1/25

A set of 4 each, door and window cranks to add detail to your interior.Contains 8 metal cast pieces per pack, by Pro Tech.

Dry Sump Diagrams and Example Photos

Want to plumb that dry sump oil system properly and realisticly? Here is a free downloadable PDF file with tons of information. Included are a few different plumbing diagrams, depending on how detailed you want to be and on your particular build. You...

Brake Kit - Rear, Drilled Rotor .125" Spindle Diameter 1/25

This is the same rear end brake set as Futurattraction's FA-C-ROT-DR2R-063, except this rotor has a larger .125" ID hole. This allows for the hubs and rotors to slide over Futurattraction's axle housing and gives more gluing surface where they are...

Beadlock Rings, Weld 1/24

A set of 4 Weld Beadlock Rings for your rear wheels. The beadlock rings are die cast and silver in color. The rings are on a protective backing and I didn't want to peel one off, so these measurements might be slightly off but close enough. OD - ...

Wheelie Bar Housing Kit 1/25

Here is a Wheelie bar wheel housing kit designed for today's PM, FC, ADRL, SS, and others. Includes PE wheel housing and PE wheels which must be assembled. 3D-printed wheels are also included along with 2 pieces of telescoping rods and two hex pins...

Larger Detailing Wire or 1/16 Spark Plug Wire

This black wire can be used for a large gauge electrical wire for 1/25 and 1/16 scales and it's also used for 1/16 scale spark plug wire. This has a solid copper core and will maintain its shape when formed. One package contains 3' of black wire, .024"...

Distributor, Black Cap, 90-Degree Boots 1/25

An authentic looking distributor with 90-degree black boots at the cap and straight black boots at the spark plug end. Includes a nicely detailed cap, base and aluminum stem along with pre-assembled spark wires with boots 90-degree black boots are...