Fuel Management

RBS Square 4-Hole Hat with Butterflys, 1/25

This is a CAD designed replica of an RBS Square 4-Hole Injector Hat, in 1/25 scale. The intake openings are hollowed out. Small holes across the front openings are provided for a rod to connect the butterflys to your throttle linkage and barrel valve...

Dual Quad Tunnel Ram Manifold 1/25

Set a pair of Dominator or Demon carbs on top of this manifold. Make sure you have room under your hood or cut a hole in the hood to allow for the height. Overall height is .43" (7/16"). Here's a photo of a real dual quad setup byRich Vitiritti. ...

Shotgun Blower Hat 1/25

A 2-Hole 'Shotgun' Injector Hat.Molded in one piece. Contains 1 resin hat.

HEMI Injector Manifold 1/25

A fuel injector manifold for your HEMI engine.   Here's a fuel plumbing diagram for this manifold.The lines go to a distribution block in the center.      Velocity stacks are available to fit this manifold. File the little 'nubs' on...

Chevy Injector Manifold 1/25

A fuel injector manifold for your Chevy engine.   Here's a fuel plumbing diagrams for this manifold.The lines go to a distribution block in the center.      Velocity stacks are available to fit this manifold. Contains 1 resin piece.

Enderle Hat 1/25

A 3-hole late model Enderle injection hat.Molded in one piece. Contains 1 resin hat, 1/25 scale, by Competition Resins.

3-Hole Carbon Fiber Hat 1/25

A 3-Hole compact Injector Hat.Molded in one piece. Contains 1 resin hat.

Throttle Linkage Photo Etched 1/25

Photoetched pieces to detail your throttle linkage.Can also use some of the pieces for parallel spring shackles, brackets and other linkages. By Pro Tech.

4-Hole Carbon Fiber Hat 1/25

A 4-Hole compact Injector Hat.  This is slightly raised and has 4 square butterflies. Molded in one piece. Contains 1 resin hat.

Fuel Cell Set 1/25

A pair of 3D-printed fuel cells with photo etched ring and strap material. Includes:Two 3D-printed fuel cellsPhoto etch rings and latch detailThe fuel cells have recesses for the PE detail to seat correctly 3D-printed and photo etched, 1/25 scale...

Supercharger Pulley Set 1/25

Three cast-metal pulleys and blower belt materail   3-pieces cast-metal and blower belt material by Pro Tech.

Holley Dominator Carburetor (Pair) 1/25

A pair of nicely detailed Holly Dominator 4-bbl Carburetors. With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING). Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the SMALL or LARGE 'T' fitting...

Fuel Line (solid core) 1/25

This line can be used for fuel, oil, water or other transfer hoses.It has a solid copper core to hold its shape.Use hex fittings sized at .025".Each package contains one coil .024" x 3', color black, by Pro Tech.

3D-Printed Demon Carburetor 1/25

Highly detailed Holley Street/Strip 4-bbl Carburetor.The photos of the carb show it on the top of Micro Scale Set bottle. Dimensions: Overall length (float bowl to float bowl) - .540" Carb diameter (for velocity stacks) - .290". The velocity stacks by...

Large, 3-Hole Carbon Fiber Hat 1/24

A three round-hole, tall Injector Hat similar to what you find on TF and PM cars. This is normally a carbon fiber hat in real life.  Search for Carbon Fiber decals in the search box at the top right of this window. Molded in one piece. Contains 1...

Flathead Air Cleaners (Spun Aluminum) 1/25

Two small machined aluminum air cleaners. Polished, domed air cleaners with rings around the bottom edge. They have a pin on the bottom and a point on the top of the dome.   Two aluminum pieces by Parts by Parks, 1/25 scale.

Round Air Cleaner, Spun Aluminum, 1/25

A realistic round spun aluminum Air Cleaner. It has a screen air filter between the top and bottom halves. Dimensions: Diameter - .45" Overall Height - .19"   No assembly required.   By Parts by Parks, 1/25 scale.

Hose Clamps Tie Wraps 1/24-1/25

Enough clamps and tie wraps for many cars. Leave them looking like stainless steel or paint the black or white. Ideal for your radiator hoses and heater hoses. Wrap them around your muffler or exhaust tip connections. The longer pieces could fit...

Velocity Stacks, Small, 4bbl Carb 1/24-1/25

Smaller, polished aluminum velocity stacks for a 4bbl carburetor. Pack contains 2 stacks, turned solid aluminum, so there's no seam. The stack is hollowed-out, leaving a solid bottom.  You could drill it out so that you'd be able to see the carb...

Tall 4-Hole TF-PM Hat #1 1/25

A four square-hole, tall Injector Hat similar to what you find on TF and PM cars Molded in one piece. Contains 1 resin hat.

Einstein Blower Hat and Base 1/25

Here's a different blower hat.  It's similar to the Janis style. Includes a plate with an injector distribution block. Overall height is 1.00". Three pieces in resin   By Competition Resins, 1/25 scale.    

S.C.O.T Blower 1/25

Here's a special blower for that Flathead engine. S.Co.T. is an abbreviation for 'Supercharger Company of Turin' (Torino), Italy. It was one of the most popular "roots" style blowers in the 1950's and popular today on Street Rods and Rat Rods...

Flathead Finned Oil Filter 1/25

An external machined aluminum finned oil filter for a Flathead Ford engine. Included are vinyl and aluminum lines for the inlet and outlet plumbing of the filter. A diagram and directions are printed on the back of the header card. Here is an accessory...

Carburetor Detail Set 1/24-1/25

A photo etched sheet of detail parts for your carb. Includes, base plates, throttle linkage, annular boosters and throttle linkage connection pivot plates.   By Detail Master, 1/24-1/25 scales.

Carbon Fiber Style Hat, Long 1/24

A round 3-hole hat that is typically seen in carbon fiber. This is a long version.  A shorter version is also available. Molded in one piece. 1/24 scale, by Competition Resins.

PSI Blower 1/25

A PSI Blower in one-piece resin.For a 'roots' type blower, see the Kalbelco series of 671, 1471 and 1671 super chargers. This is a standalone blower - pulleys or other components are not included. Contains 1 resin blower by Competition Resins, 1/25 scale.

Carbon Fiber Style Hat, Short 1/24

A round 3-hole hat that is typically seen in carbon fiber. This is a short version.  A longer version is also available. Molded in one piece. 1/24 scale, by Competition Resins.

1471 Kobelco Blower with Blanket 1/25

A Kobelco 1471 Blower with a restraint blanket molded in.Made in one piece.This a blower only - pulleys or other components are not included. Check out this photo for an idea of which blower you need. Contains 1 resin blower.

Pro Stock Style Fuel Cell 1/25

A Pro Stock type Fuel Cell. Contains 1 resin tank, 1/25 scale

Dual Nitrous , O2, Fire or Air Bottle Pair 1/25

Here are a pair of bottles that can be used for nitrous, fire, compressed air, oxygen, etc. Mount them in the interior, at the rear or ahead of the engine. Add a NOS decal found here, if this is the intended use for these bottles.  The 'small' size...

1471 Kobelco Blower 1/25

A 1471 Kobelco Blower in one-piece resin.The detail is quite good and the bolts are sharp. This is a standalone blower - pulleys or other components are not included. Check out this photo for an idea of which blower you need. Contains 1 resin blower.