Pro Tech

Fuel Junction Block 1/25

For your single or dual carburetor setups where the fuel lines split.  Made with molded-on fittings.Use .025 Braided Lines and Fittings. You can also add a small T fitting.    ...

Fuel Line (solid core) 1/25

This line can be used for fuel, oil, water or other transfer hoses.It has a solid copper core to hold its shape.Use hex fittings sized at .025".Each package contains one coil .024" x 3', color black,...

Heater Hose 1/25

This copper core wire is used as a small heater hose or other transfer hose. The copper core will hold its shape when formed into place.  Cut the outer skin back, at the ends, just enough to...

Hex Braided Line Fittings .025

These hex fittings are compatible with the .025 diameter Braided Line and .020 aluminum hard line.   Make your own AN fittings using Pro Tech's aluminum Hex Fittings. For a realistic...

Hex Braided Line Fittings .035

These hex fittings are compatible with the .035 diameter Braided Line and our .034 and .031 aluminum 'hard' lines found in 'Hard & Soft Lines'.   Make your own AN fittings using Pro Tech's...

Hex Braided Line Fittings .045

These hex fittings are compatible with the .045 diameter Braided Line, .040 Aluminum 'Hard' Line or .039 Soft Line    Make your own AN fittings using Pro Tech's aluminum Hex...

Hex Braided Line Fittings .060

These hex fittings are compatible with the .060 diameter Braided Line and .065 aluminum hard line.   Make your own AN fittings using Pro Tech's aluminum Hex Fittings.For a realistic anodized...

Hex Braided Line Fittings .080

These hex fittings are compatible with the .080 diameter Braided Line and .078 aluminum hard line.   Make your own AN fittings using Pro Tech's aluminum Hex Fittings.For a realistic anodized...

Hex Line Fittings .018

These hex fittings can be used for small nuts and are compatible with the .018" diameter Braided Line, . and .020" soft line.   At 1/25 scale, this hex head dimension would represent a 1/4" bolt...

Holley Dominator 4bbl Carburetor 1/16

Detailed Holly Dominator 4bbl CarburetorWith single or dual carbs, you'll need Pro Tech's Fuel Junction Block.Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the T fitting...

Holley Dominator 4bbl Carburetor 1/25

Detailed Holly Dominator 4-bbl Carburetor. With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING). Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along...

Hood Pin Set 1/25

One-piece (pin and plate) hood pins that are photoetched. Contains 12 photoetched hood pins per pack, by Pro Tech.

Interior Door & Window Crank Set 1/25

A set of 4 each, door and window cranks to add detail to your interior.Contains 8 metal cast pieces per pack, by Pro Tech.

Large Detailing Wire

Large gauge detailing wire for ignition items, batteries and other items that have large electrical loads. Available in Black, Red, Blue and Yellow. One package contains 3' x .018" diameter wire...

Larger Detailing Wire or 1/16 Spark Plug Wire

This black wire can be used for a large gauge electrical wire for 1/25 and 1/16 scales and it's also used for 1/16 scale spark plug wire. This has a solid copper core and will maintain its shape...

License Plate Frame Set 1/25

Photoetched scale state license plate frames for added realism.   Also, see the state license plates and performance license plates.   One set of 8 photoetched license plate frames, by Pro...

License Plate Frame Set 1/43

Photoetched scale state license plate frames for added realism. NOTE THIS IS 1/43 SCALE ONLY Also, see the state license plates and performance license plates. One set of 8 photoetched license...

Mallory/MSD Ignition Coil 1/16

Modeled after a Mallory Ignition Coil. Also looks very similar to a MSD Ignition Coil. Photo of completed piece is for reference only. Painting, wires and decals are not included. Each package...

Mallory/MSD Ignition Coil 1/25

Modeled after a Mallory Ignition Coil.  Also looks very similar to a MSD Ignition Coil.Photo of completed coil is for reference only. Paint, wires and decals are not included...

Monster Tach with Shift Light, 1/25

A 3D-printed surface-mount Tach with Shift Light and mounting foot. Tach Body is .18" diameter Face of tach is recessed into the bezel/shroud which extends from the tach body. Includes white face...

MSD 6 Ignition Box 1/16

Each package contains 1 MSD 6 ignition box. The casting of this box shows the ribs and area for the MSD logo. The photo shows two Pro Tech MSD boxes with MSD labels copied from an automotive magazine...

MSD 6 Ignition Box 1/25

Each package contains 1 MSD 6 ignition box. The casting of this box shows the ribs and area for the MSD logo. The photo shows two MSD boxes with MSD labels copied from an automotive magazine and...

MSD 7 Ignition Box 1/16

Each package contains 1 MSD 7 ignition box. See 'Detailing Wire, Small' to enhance this item.Resin 

MSD 7 Ignition Box 1/25

Each package contains 1 MSD 7 ignition box. See 'Detailing Wire' to enhance this item, by Pro Tech.Resin, by Pro Tech, 1/25 scale.

MSD Pro Mag 44 Pre-Wired 1/25

Here's a 3D-printed MSD Pro Mag with your color choice of spark plug wire already installed.Drill a hole in your block and insert this MSD magneto. Route the wires to the spark plugs and don't forget...

MSD Pro Mag 44, 1/25

A 3D-printed MSD Pro Mag. Its one-piece design allows for ignition wire to be threaded through openings below the top cap. Includes a styrene shaft and decals. Replacement decals will be...

Nut & Bolt Set - Photo Etched

Photo Etched bolt and nut flat heads,  Nut features a protruding bolt. Offered in 3 sizes to fit your needs. The dimension is measured across the flats.Mounted on a soft back so no cutting of...

Oil Breathers (Open Element) 1/25

A pair of machined aluminum oil breathers with filter element material.Contains 2 machined aluminum round breathers per pack, by Pro Tech.

Oil Breathers 1/25

A pair of machined aluminum oil breathers to mount on your valve covers. Contains 2 machined aluminum round breathers per pack, by Pro Tech.

Oil Filters 1/25

Oil filters made of cast metal.This is a standalone filter. If you need a dual remote oil filter, see Pro Tech's product listed elsewhere here. Each package contains 8 metal cast pieces, by Pro Tech...

Parachute Kit 1/25

This is the ultimate in a 1/25 scale drag chute - Contains an inner resin parachute core with an outer textured material to simulate the actual parachute jacket material.  Don't rely on flat...

Performance License Plate Set 1/25

Performance license plates for added realism.   Plates included are:   Chevrolet USA-1 Chrysler Dodge Ford Motorsports Ford Lincoln Mercury Mercury Mopar Mustang Plymouth Today's Chevrolet...

Performance License Plate Set 1/43

Performance license plates for added realism.   NOTE THIS IS 1/43 SCALE ONLY   Plates included are:   Chevrolet USA-1 Chrysler Dodge Ford Motorsports Ford Lincoln...

Pre-Wired Distributor 1/25

Here's a machined aluminum distributor body with your color choice of spark plug wire already installed.Drill a hole in your block and insert this distributor. Route the wires to the spark plugs and...

Radiator Flex Fan, 13" Dia 1/25

Add another element of detail to your engine bay.A pair of 13" diameter Flex Fans.      Contains 2 photoetched fans per package in 1/25 scale, by Pro Tech.

Radiator Flex Fan, 15" Dia 1/25

Add another element of detail to your engine bay.A pair of 15" diameter Flex Fans.      Contains 2 photoetched fans per package in 1/25 scale, by Pro Tech.