Competition Resins

Long Aero III Pro Stock Hood Scoop, 1/25

A long, rectangular-opening Pro Stock Hood Scoop. It's designed to rest against the windshield and may have to be adjusted to fit your windshield angle. This is a longer version of the Aero II P/S...

M&H Racemaster 'Pie Crust' Slicks 1/25

M&H Racemaster 'Pie Crust' Drag Slicks, black wall. Raised 'M&H Racemaster' lettering on one sidewall. Letters are slightly raised.Fairly soft rubber cast tires. Tire...

M&H Racemaster Drag Slicks 1/16

M&H Racemaster Drag Slicks. Raised 'M&H Racemaster' on sidewall. These are a hard resin and do not have a lot of room for play with wheel sizes. Tire Measurements: Width 1.00",  25...

Milodon Valve Covers 1/25

A pair of really nice Milodon valve covers with spark plug holes already drilled. These valve covers have horizontal grooves running lengthwise. They fit on a BBC engine. Contains 2 resin pieces.

MiniLite Road Racing Wheel Set 1/25

A set of four road MiniiLite Racing Wheels. Unlike the racing set of MiniLite wheels, these are all the same size.   Contains 4 resin wheels by Competition Resins, 1/25 scale.

Molded Blower Belt with Pulleys 1/25

A more detailed blower belt set than found in kits. The belt shows cogs on the inside and bolt heads are found on the pulleys. Also has the blower pulley, crank pulley and idler pulley molded in....

MOON 392 HEMI Valve Covers 1/25

A pair of ribbed Moon 392 HEMI valve covers with spark plug holes already drilled. Contains 2 resin pieces.

Motorwheel Pro Stock Wheels Front & Rear 1/25

A set of four Motorwheel P/S Racing Wheels - front and rear. Contains 2 pairs resin wheels, 1/25 scale.

Mustang 2010-12 Pro Mod / Pro Stock Body 1/25

2010-2012 Mustang Pro Stock / Pro Mod Body. Kit includes: Hood Scoop Hood Scoop Blank Rear Wing Clear Headlight and Taillight covers I have a one-piece 3D-printed Resin Chassis for this...

Mustang Tear Drop Hood - Revell 1/25

A tear drop bubble that can be cut out and mounted on your hood or it's made to fit Revell's '65-'66 Mustang.   Here's an example of the hood on a 'Russ Davis Ford' Mustang...

Oil Pan, HEMI 1/16

A flat-style oil pan for a HEMI or BBC   Resin, 1/16 scale.

Outlaw Super Cowl Hood Scoop 1/25

A raised 2-level hood scoop.   Molded in one piece. Contains 1 resin scoop, 1/25 scale.

Pirelli Type Small Front Racing Tires 1/25

These front tires will work for a Gasser as well as a Pro Mod or street racer. These are slightly smaller than the Futurattraction Front Runner tires. These are semi hard tires but still flexible...

Pro Mod - Pro Stock D Shaped Opening Hood Scoop 1/25

A raised hood scoop for that PM or PS racer with a 'D' shaped mouth opening. See also similar hood scoops with a Round Opening or Square Mouth Opening.Molded in one piece. Contains 1 resin scoop,...

Pro Mod - Pro Stock Square Opening Hood Scoop 1/25

A raised hood scoop for that PM or PS racer with a square mouth opening. See also similar hood scoops with a Round Opening or 'D-Shaped Opening. Molded in one piece. Contains 1 resin scoop,...

Pro Mod / Funny Car / Pro Stock Rear Wing 1/25

Includes main horizontal wing, sides and support rods. This wing can be made to fit many different race classes.   Here are some examples of what can be done.     Resin, 1/25 scale

Pro Mod / Pro Stock Rear Wing 1/25

A one piece wing with an arch shape and small side spoilers. This is a typical wing for the Stratus body, but it can be made to fit many different cars and race classes. Dimensions: Width 2.5"...

Pro Stock / Super Stock Drag Slicks 1/25

Drag Slicks for your Pro Stock, Super Stock or other race car.  Dimensions are listed below to see if they fit your needs. Each side of these tires will accept a different size wheel. ...

Pro Stock Late Model Seat, 1/24

Here is a one-piece ‘shell’ type seat. Has molded-in padding, harness and buckles. Measurements: Width at Top (widest point) - 0.82” Height - 1.15” Depth - 0...

Pro Stock Late Model Valve Covers 1/25

A pair of Pro Stock valve covers with a flat face. Contains 2 resin pieces.

Pro Stock Round Opening Hood Scoop 1/25

A Round Opening Pro Stock Hood Scoop. See also similar hood scoops with a Square Opening or 'D' Shaped Opening. Molded in one piece. Contains 1 resin scoop, 1/25 scale.

Pro Stock Style Fuel Cell 1/25

A Pro Stock type Fuel Cell. Contains 1 resin tank, 1/25 scale

Pro Stock/Pro Mod Wing 1/25

This wing has a small arch as viewed from the toop. Has teardrop end plates. Measurements: Overall length: 2.15" Width at end plates: .52" Contains 1 resin piece, 1/25 scale

PSI Blower 1/25

A PSI Blower in one-piece resin.For a 'roots' type blower, see the Kalbelco series of 671, 1471 and 1671 super chargers. This is a standalone blower - pulleys or other components are not included...

S.C.O.T Blower 1/25

Here's a special blower for that Flathead engine. S.Co.T. is an abbreviation for 'Supercharger Company of Turin' (Torino), Italy. It was one of the most popular "roots" style blowers in the...

Shotgun 2-Hole Injector Hat 1/16

Contains 1 'Shotgun' type 2-hole resin injector hat. See also, photo etched butterfly discs made for this injector.   Resin, 1/16 scale.

Shotgun Blower Hat 1/25

A 2-Hole 'Shotgun' Injector Hat.Molded in one piece. Contains 1 resin hat.

Sullivan Flat-Welded Fuel Tank 1/16

A Sullivan flat-welded fuel tank. Contains 1 resin tank, 1/16 scale

Tall 4-Hole TF-PM Hat #1 1/25

A four square-hole, tall Injector Hat similar to what you find on TF and PM cars Molded in one piece. Contains 1 resin hat.

Top Fuel Wheel Set 1/25

A set of four Racing Wheels for a TF dragster - front and rear. Features a thin front wheel with a deep rim in order to make sure the timing lights are tripped at the end of the quarter mile. The...

Weld Pro Star 4-Wheel Set 1/25

A set of four Weld Pro Star Racing Wheels - front and rear. Photo shows centers as one solid piece but the '5-spokes' cut out. Includes deep rear wheels and front wheels showing lug nuts.  ...

Wide Rear Steel Wheel Pair 1/25

A pair of deep rear wheels. These are stock looking steel wheels with lug nuts, except they're wide to hold big rubber. Great for street racers, early Super Stock or Pro Stock and Rat Rods...

Wrinkle Wall Drag Slicks, 1/25

Current style Drag Slicks with a wrinkled sidewall.  Dimensions are listed below to see if they fit your needs. Each side of these tires will accept a different size wheel. Tire...

‘70’s Vega P/S Interior & Chassis Kit, 1/25

Here is an interior and chassis set for a ‘72-‘74 Ford Vega. This fits Comp Resins’ P/S Vega resin body found here. Kit includes Interior Tub       With tubbed...

‘72-‘73 Vega P/S (Grumpy) Body 1/25

Build it as your own racer or duplicate a ‘72-‘73 Bill “Grumpy” Jenkins’ P/S Vega. A chassis & interior kit is available here. Features Pro Stock Vega...