Pro Tech

Radiator Flex Fan, 17" Dia 1/25

Add another element of detail to your engine bay.A pair of 17" diameter Flex Fans.      Contains 2 photoetched fans per package in 1/25 scale, by Pro Tech.

Rod Ends/Link/Heim Kit 1/16

Cast metal parts for your suspension or throttle linkage detail.  Can be used for heim joints/rod ends in suspension areas like a 4-link rear end, panard bar or front radius rods. Use in...

Roll Bar Padding 1/16

Rubber tubing for roll bars.Can also be used for other larger water/coolant hoses.At 1/16 scale, this would be equal to 1.5" ID and 3.5" OD.At 1/12 scale, this would be equal to 1...

Roll Bar Padding 1/25

Rubber tubing for roll bars.   Dimensions are as follows: 1/8" OD 1/16" ID 1/32" Wall thickness   Can also be used for other larger water/coolant hoses.     Four, 2...

Round 14" Aluminum (Custom Style) Air Cleaner 1/25

This machined aluminum air cleaner is equal to a real world 14" w x 3" h.  It would be typically be found on a single carburetor.Includes photoetched wing nut and simulated filter element. The...

Round 4" Aluminum (Nostalgia Style) Air Cleaner 1/25

This machined aluminum air cleaner measures 4"w x 2"h. It would be typically be found on a single carburetor.Includes photoetched wing nut and simulated filter element. The photo shows a 14" air...

Round 9" Aluminum (Edelbrock Style) Air Cleaner 1/25

This machined aluminum air cleaner measures 9"w x 2"h. It would be typically be found on a single carburetor. Modeled after an Edelbrock air cleaner.Includes photoetched wing nut and simulated filter...

Round 9" Aluminum Air Cleaner 1/25

This machined aluminum air cleaner measures 9"w x 2"h. It would be typically be found on a single carburetor.Includes photoetched wing nut and simulated filter element. Photo of a 14" air cleaner...

Small Detailing Wire

Small gauge detailing wire for ignition items, lights, gauges and other smaller electrical loads. Available in Black, Blue and Yellow. One package contains 3' x .007" diameter wire. Specify color.

Spark Plug Boots 45Deg, 3D, 1/25

A package of ten, 45-degree, 3D-printed, spark plug boots.   When cutting the boot from the tree, a stem remains to insert into the head's spark plug hole (use a #70 drill bit).   The...

Spark Plug Boots 90Deg, 3D, 1/25

A package of ten, 90-degree, 3D-printed, spark plug boots, ideally suited for the distributor cap (see photo). Enough for eight spark plugs boots at the distributor, plus two boots for the coil wire...

Spark Plug Boots Black 1/16

Rubber boots ready to use as is, for straight boots, or cut them and glue at a 90 degree angle for angled boots.Use in combination with your choice of color Pro Tech Spark Plug Wire.Each pack...

Spark Plug Boots Black 1/25

Rubber boots ready to use as is, for straight boots, or cut them and glue at a 90 degree angle for angled boots.Use in combination with your choice of color Pro Tech Spark Plug Wire.Each pack...

Spark Plug or Large Detailing Wire 1/25

Choose a color for your spark plug wires.This can also be used for large detailing wire, if the other Pro Tech wire choices aren't large enough.Available colors:BlackRedBlueYellowOrangeGrayOne length...

Spark Plug Wire Looms, Photoetched 1/25

These wire looms will keep your spark plug wires separated. This will give you an organized look and it makes it easier to form your wires where you want them.  Used on all drag cars or street...

State License Plate Set 1/25

State license plates for added realism.   Plates included are: ArizonaCanadaColoradoFloridaIllinoisMichiganMarylandNew JerseyNew YorkTennessee Also, see the license plate frames.   One set...

State License Plate Set 1/43

State license plates for added realism.   NOTE THIS IS 1/43 SCALE ONLY   Plates included are: ArizonaCanadaColoradoFloridaIllinoisMichiganMarylandNew JerseyNew YorkTennessee Also, see...

Street Rod Gauge Background Set #1, Colored 1/25

Add some color to those street rod gauges.For use only with Street Rod Gauges Set #1 (black or white).Contains printed material, 4-colors, by Pro Tech.

Street Rod Gauge Background Set #2, Colored 1/25

Add some color to those street rod gauges.For use only with Street Rod Gauges Set #2 (black or white).Contains printed material, 4-colors, by Pro Tech.

Street Rod Gauges Set #1, Black 1/25

Enough photoetched trims and BLACK gauge faces for four cars. This will add detail to your interior.These gauges are popular in '30 - '34 Street Rods and Roadsters with flat dash boards. They...

Street Rod Gauges Set #1, White 1/25

Enough photoetched trims and WHITE gauge faces for four cars. This will add detail to your interior.These gauges are popular in '30 - '34 Street Rods and Roadsters with flat dash boards. They are...

Street Rod Gauges Set #2, Black 1/25

Enough photoetched trims with BLACK gauge faces for four cars. This will add detail to your interior.These gauges are popular in '30 - '34 Street Rods and Roadsters with flat dash boards. They...

Street Rod Gauges Set #2, White 1/25

Enough photoetched trims and gauge faces for four cars. This will add detail to your interior.These gauges are popular in '30 - '34 Street Rods and Roadsters with flat dash boards. They are typically...

Supercharger Pulley Set 1/25

Three cast-metal pulleys and blower belt materail   3-pieces cast-metal and blower belt material by Pro Tech.

Tee Fitting, Large

This is a large inline fitting for braided lines, hard lines or hoses.  Anywhere you have a split.Typical uses are dual feed carburetors, tunnel ram, oil lines and brake lines.Use Pro Tech .035...

Tee Fitting, Small

This is an inline fitting for braided lines, hard lines or hoses.Typical uses are splits for carburetor fuel lines and brake lines.Use Pro Tech .025 Braided Line and matching Fittings. Each package...

Textured Material for Belts, Harness, Restraint and More

This looks like a piece of paper, but it's much more. This is a fine cotton textured paper on one side and when colored with a Sharpie (recommended) the texture is highlighted. It's easily cut to...

Throttle Linkage 1/16

Whether it's a blown engine, injected or carbureted, these photoetched pieces will detail your throttle linkage. For the metal linkage that fit into the holes, use the .014 and ...

Throttle Linkage Photo Etched 1/25

Photoetched pieces to detail your throttle linkage.Can also use some of the pieces for parallel spring shackles, brackets and other linkages. By Pro Tech.

Tire Valve Stems 1/25

Add another element of detail to your wheels.A set of machined aluminum tire valve stems. Photo of Tire Valve Stems with .025 Hex Fittings for the lug nuts. Use .025 Evergreen rod for the studs...

True Scale Bi-Color Green/Red "LED" Searchlight Signal, HO Scale

Pro Tech's realistic looking True Scale "LED" Searchlight Signals are high quality photoetched signals. They are designed from real life railroad signal dimensions to produce a 'true scale'...

True Scale Bi-Color Green/Red "LED" Searchlight Signal, N Scale

Pro Tech's realistic looking True Scale "LED" Searchlight Signals are high quality photoetched signals. They are designed from real life railroad signal dimensions to produce a 'true scale'...

True Scale Colorlight Signal HO Scale (triple lens, single housing, non-LED)

PRO TECH's True Scale Signals are high quality photoetched signals (non-LED).   This 3-lens HO colorlight signal is in a single vertical housing and is designed from real life railroad signal...

True Scale Colorlight Signal N Scale (triple lens, single housing, non-LED)

PRO TECH's True Scale Signals are high quality photoetched signals (non-LED).   This 3-lens N scale colorlight signal is in a single vertical housing and is designed from real life railroad...

True Scale Green "LED" Searchlight Signal, HO Scale

Pro Tech's realistic looking True Scale "LED" Searchlight Signals are high quality photoetched signals. They are designed from real life railroad signal dimensions to produce a true scale...

True Scale Green "LED" Searchlight Signal, N Scale

Pro Tech's realistic looking True Scale "LED" Searchlight Signals are high quality photoetched signals. They are designed from real life railroad signal dimensions to produce a 'true scale'...