Bodies & Parts

Bumper Brackets 1/25

A set of two different style brackets to hold up that bumper or other item. Straight brackets with holes. Dropped style bracket. Photos courtesy of Highlight Model Studio Facebook page. Assembly is required.   Photo etched sheet, by...

Chevy 1966 Pickup Detail Kit 1/25

A detail set for Revell's 1966 Chevy Pickup Truck.  Includes: Cab trim pieces behind the door C10 logo Steering wheel horn ring Rear tail lights Keys     Here's a kit that you may like.   Photo etched sheet, by...

Rectangle Grille Pattern 1/24-1/25

This is a plate consisting of a rectangular pattern. It is typically used for a grille, in the place of the kit piece. You can see through it to view your radiator, so make sure it looks realistic with this radiator face detail. It's large enough for...

Large Tapered Pro Stock Wing 1/25

This wing is fairly large and is straighter along the rear edge than along the front edge. End plates are tapered toward the rear and extend down from the top edge. Measurements: Overall length: 2.15" (at the widest, front, edge) Width at end plates: 1...

Pro Stock/Pro Mod Wing 1/25

This wing has a small arch as viewed from the toop. Has teardrop end plates. Measurements: Overall length: 2.15" Width at end plates: .52" Contains 1 resin piece, 1/25 scale

Altered or Small Wing 1/25

A small wing for any use, but a fuel altered is an example. Has teardrop end plates. Measurements: Length: 1" Width: .62" Contains 1 resin piece, 1/25 scale

Pro Mod / Pro Stock Rear Wing 1/25

A one piece wing with an arch shape and small side spoilers. This is a typical wing for the Stratus body, but it can be made to fit many different cars and race classes. Dimensions: Width 2.5" Depth .625"   Resin, 1/25 scale

Bob Glidden '83 T'Bird Decal Sheet #2 1/25

Bob Glidden was a formidable Pro Stock drag racing force.  His '83 Thunderbird was his 'all new' design ans was the car that brought him out of retirement. This decal sheet brings the '83 T-Bird back to life   These decals fit the Competition...

Wheelie Bar/Window Net Material 1/25

The perfect material for the net between the wheelie bars or on a window. It is easy to trim to fit and can be dampened and shaped to some degree.  The mesh is 13 x 13 per square inch. This is a real world photo for example purposes.  One...

53 Corvette Pro Mod Body '05 1/24

A really nice 1953 Pro Mod Resin Body. Features molded-in rear wing. The finish on the body is really smooth and crisp.   One resin body 1/25 scale, by Competition Resins  

41 Willys Pro Mod Body '05 1/24

The popular '41 Willys Pro Mod Resin Body. Features molded-in rear wing. The finish on the body is really smooth and crisp. Use Revell Pro Street Corvette Kit For Chassis.   One resin body 1/24 scale, by Competition Resins  

Stratus F/C Body '05 1/24

2005 Dodge Stratus Funny Car Resin Body. Body comes with Exterior & Interior Rear Spill Plates Use late model Revell funny car kit for chassis, 1/24 scale   One resin body with included items as outlined, 1/24 scale, by Competition Resins...

23 Pickup T Fuel Altered Body 1/25

 Includes: T Pickup Body Radiator Shell Front Wing              Photo of real T altered I have a one-piece 3D-printed Resin Chassis for this body. One resin body with included items as...

Hood Pin Kit 1/24-1/25

Complete hood pin kit to create a realistic hood pin assembly. Kit includes: 2 sizes of round scuff palates 2 styles of retaining clips 15 eyelet needles for mounting the pins Lanyard wire.   By Detail Master, 1/25 scale.    

Mustang 2010-12 Pro Mod / Pro Stock Body 1/25

2010-2012 Mustang Pro Stock / Pro Mod Body. Kit includes: Hood Scoop Hood Scoop Blank Rear Wing Clear Headlight and Taillight covers I have a one-piece 3D-printed Resin Chassis for this body. One resin body with included items as outlined,...

Nostalgia Drag Racing Mini Decal Sheet #27 1/25

A decal sheet intended for Gassers, but has decals that can be used on other nostalgia type dragsters. A few individual decals included are: AHRA Mooneyes Smith Warner Hooker Headers M/T GMC M&H Isky Cams Lion's Drag Strip Clay Smith...

Nostalgia Drag Racing Mini Decal Sheet #20 1/25

A decal sheet intended for Gassers, but has decals that can be used on other nostalgia type dragsters. A few individual decals included are: SOHC A/Gas This is a 'mini' decal sheet measuring 4" x 5". One sheet. by SLIXX Decals, 1/25 scale.

Nostalgia Drag Racing Mini Decal Sheet #19 1/25

A decal sheet intended for Gassers, but has decals that can be used on other nostalgia type dragsters. A few individual decals included are: Doug's Headers C/Gas A few 'speed shop' names 327 cu in This is a 'mini' decal sheet measuring 4" x 5"...

Engine Bay Tin, '69 Camaro 1/25

This tin work fits Revell's 1969 Camaro. Great for that pro street or race car look!t This is a Tight fit and may require a bit of filing on the outer edges.   Photo etched, 1/25 scale, by Futurattraction.

Engine Bay Tin, '67 Camaro 1/25

This tin work fits Revell's 1967 Camaro. Great for that pro street or race car look!t This is a Tight fit and may require a bit of filing on the outer edges.   Photo etched, 1/25 scale, by Futurattraction.

Hinges & Supports 1/24-1/25

Easily hinge doors, hoods and trunk lids.  Also Pro Mod and stock car roof escape doors. Enough for several cars.   One photo etched sheet by Detail Master, 1/24-1/25 scales.

Summit Racing Pro Stock Camaro Decal Sheet #2 1/25

This decal sheet allows you to choose between two different versions of the Summit Racing Camaro. The blue Camaro or silver Camaro as shown here.     These fit the Competition Resins' 2012-2013 Camaro P/S body.One sheet. by SLIXX Decals, 1/25...

Summit Racing Pro Stock Camaro Decal Sheet #1 1/25

This decal sheet allows you to choose between two different versions of the Summit Racing Camaro. The white Camaro or red Camaro as shown here.     These fit the Competition Resins' 2012-2013 Camaro P/S body.One sheet. by SLIXX Decals, 1/25...

Camaro 2012-13 Pro Mod / Pro Stock Body 1/25

  2012-13 Camaro Pro Stock - Pro Mod Resin Body Kit includes: Hood Scoop Hood Scoop Blank 2 Grill Inserts Rear Wing Translucent Red Tail Lights See SLIXX decals for two different Summit Racing body decals. Sheet #1 or...

Fairmont 1979 Dyno Don Decals1/25

1979 Dyno Don Nicolson Fairmont DecalsThis set of decals represents the paint job on Dyno Don's 1979 Fairmont. The "205" shown on his entry number indicates that he finished 5th in Division 2 the previous year.    Decals by Chuck Naylor. This...

Fairmont 1978 Dyno Don Decals1/25

1978 Dyno Don Fairmont DecalsThese decals represent the livery that Dyno Don's '78 Fairmont wore the year after he won the 1977 NHRA Pro Stock Championship with his Mustang II.  Decals by Chuck Naylor.  This decal set is designed to fit...

Fairmont 1978 Pro Stock Bob Glidden Decals1/25

These decals reflect the appearance of Bob Glidden's Fairmont Futura Pro Stock during the 1978 season.     This decal set is designed to fit Futurattraction's Pro Stock Fairmont body.   One decal set, shipped by Futurattraction, 1/25 scale.

Fairmont 1981 Pro Stock Bob Glidden Decals1/25

Bob Glidden's 1981 NHRA pro stock Fairmont decal set.   The year after he won the Pro Stock championship in his similar appearing 1980 Fairmont.  There are subtle differences between the 1980 and 1981 cars.      This decal set...

Challenger '08 - '10 Hood 1/25

A 2008-2010 Challenger hood in the 70's Shaker Hood style.   Contains 1 resin hood, 1/25 scale

Parachute Kit - Complete 1/25

A realistic looking and feeling parachute to slow down that racer.  Now available in a kit. It can be assembled in either the criss-cross or flap configuration and includes a red flag. The bag scales out to a 10"x10" reproduction of  Simpson,...

Rear Tube Frame/Clip .900" Wide 1/25

Here's  a round-tube rear frame clip ready to install.  It's 3D printed. Dimensions are:Frame width = .900" (about 29/32", 22.9mm)Frame tube diameter = .080"Cross member diameter = .080"Overall length = 2.55" Two other frame clip widths are...

Rear Tube Frame/Clip .700" Wide 1/25

Here's  a round-tube rear frame clip ready to install.  It's 3D printed in FUD material (see below). Dimensions are:Frame width = .700" (about 45/64", 17.8mm)Frame tube diameter = .080"Cross member diameter = .063"Overall length = 2.55" Two...

Fairmont Drag Racing Body 1/25

A complete Fairmont drag race body kit (minus hood which is purchased separately) with additional options listed below. A Pro Stock version of this Fairmont is also available.  Dyno Don and Bob Glidden decals are also available. Note that...

Dzus Mounting Plate Combo Pack, 1/25

Here is a smaller quantity of four different types of Dzus mounting plates. Attach them to the chassis and body to provide anchor points. See also the Type 2 longer mounting plates or the Lightweight mounting plates. They're individually mounted on a...

Louvers 3D 1/25 - 1/24

Louvers in 3D by Archer Surface Details. This is what you need for that Salt Lake racer, hot rod, rat rod or wherever you need to ventilate air. Use them at header welds and chassis welds These aren't decals.  They're 3D raised resin louvers that...

Dzus Mounting Plates Lightweight 1/25

These light weight mounting plates, attach to the chassis or other structural member and provide an anchor point for the Dzus fasteners. See also Tpye 1 and Type 2 mounting plates for different configurations. They're individually mounted on a soft...