Product Description
A complete one-piece 3D-resin-printed chassis.
This was designed to fit Competition Resin's 1953 Corvette Pro Mod body, but the body is no longer being made. It may fit your needs too (see dimensions below).
This chassis is for bodies with a long nose/hood. The A-pillars are 3-1/2" from the front end of the chassis and about 1-7/8" from the front wheel.
THIS IS THE COMP RESIS CORVETTE BODY
Made of resin so easy modifications can be made by cutting, sanding and use of CA glue. Using black resin means no painting. There are a lot of nooks and crannies that are difficult to get paint on, resulting in possible drips and runs or missing areas altogether.
I designed it to utilize many of Futurattraction's suspension and other items (see list of links below). It will save you a ton of time without having to scratch build your own means of mounting the front/rear suspension and more.
Structural members are .090" diameter.
Features:
- The body is designed to sit on the chassis for easy removal for cockpit and engine display (body not included, nor means of attaching body)
- Front strut upper and lower mounting eyelets, for the strut/coil over spindle and lower A-arms.
- Rear 4-link brackets are molded to the chassis
- Rear upper coil-over shock supports
- Rear engine/transmission plate is molded in
- Detailed driver's cage with wrap-around tubing
Dimensions
A-pillar to chassis front: 3.5"
A-pillar to front wheel centerline is 1.8"
Wheelbase: 4.25" (rear end can be adjusted fore/aft a little)
Width at bottom rails at widest point: 2.37"
Overall length: 7.50"
Overall height: 1.65"
Width at rooftop: 1.43"
Length at rooftop 1.30"
THIS IS MADE TO ORDER SO ALLOW UP TO 2 DAYS FOR PRODUCTION AND SHIPPING.
LINKS TO PRODUCTS USED
FUTURATTRACTION PRODUCTS THAT WILL FIT:
Front Motor Plate
Front Strut Kit for 5-Bolt Wheels with TBM Rotors, or with Drilled Rotors
Front Strut Kit for Spindle Wheels with Slotted Rotors
Wishbone, A-Arm Supports
Rack & Pinion Set
Coil-Over Shock Kit (rear)
16x33" Drag Slicks (largest that fits) or 14x32" Drag Slicks, if you want more room
Carbon Fiber Seat
Here's a photo of the chassis with Futurattraction's Front Strut and my blown ProLine Engine.
Chassis is complete and in one-piece, but addition and assembly of suspension, engine, wheels and body are required.
3D-printed resin chassis by Ted's Modeling, 1/25 scale
** Aluminum bolt sets are by RB Motion
